Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.     

Event-triggered output-feedback tracking of a class of nonlinear systems with unknown time delays

A single function approximation (SFA) approach for event-triggered output-feedback tracker design is presented for uncertain nonlinear time-delay systems in lower-triangular form. Contrary to the existing event-triggered output-feedback control methods dependent on multiple function approximators in the presence of lower-triangular nonlinearities, the proposed SFA approach provides the following advantages: (i) the simple observer structure independent of function approximators; (ii) one event-triggering condition based on only a tracking error; and (iii) the simple control scheme using one function approximator. Thus, the structural simplicity is allowed for implementing the observer and the event-triggering law in the sensor part and the adaptive tracker in the control part. Under the proposed SFA-based event-triggered control scheme, it is shown that the boundedness of closed-loop signals and the existence of a minimum inter-event time are guaranteed regardless of unknown time-delay nonlinearities and unmeasurable state variables.

     

Anti-Hair Loss Effect of Adenosine Is Exerted by cAMP Mediated Wnt/β-Catenin Pathway Stimulation via Modulation of Gsk3β Activity in Cultured Human Dermal Papilla Cells

In the present study, we investigated the molecular mechanisms of adenosine for its hair growth promoting effect. Adenosine stimulated the Wnt/β-catenin pathway by modulating the activity of Gsk3β in cultured human dermal papilla cells. It also activated adenosine receptor signaling, increasing intracellular cAMP level, and subsequently stimulating the cAMP mediated cellular energy metabolism. The phosphorylation of CREB, mTOR, and GSK3β was increased. Furthermore, the expression of β-catenin target genes such as Axin2, Lef1, and growth factors (bFGF, FGF7, IGF-1) was also enhanced. The inhibitor study data conducted in Wnt reporter cells and in cultured human dermal papilla cells demonstrated that adenosine stimulates Wnt/β-catenin signaling through the activation of the adenosine receptor and Gsk3β plays a critical role in transmitting the signals from the adenosine receptor to β-catenin, possibly via the Gαs/cAMP/PKA/mTOR signaling cascade.     

On-line trace enrichment for the simultaneous determination of microcystins in aqueous samples using high-performance liquid chromatography with diode-array detection.

The need for a rapid, sensitive and reliable analytical method for cyanobacterial toxins, microcystins, has been emphasized by the awareness of toxic cyanobacteria as a human-health risk through drinking water. A new high-performance liquid chromatographic method with column switching was developed for the determination of microcystin-LR, -RR and -YR from water samples without pre-purification. The filtered water sample was passed through a Zorbax CN precolumn at a flow-rate of 3 ml/min for on-line trace enrichment. After valve switching, concentrated analytes were eluted in back-flush mode and separated on a Luna C18 column with a gradient of acetonitrile -20 mM phosphate buffer (pH 2.5). The method showed excellent precision, accuracy and speed with detection limits of 0.02 microgram/ml from 100 ml of surface water. The total analysis time per sample was about 90 min. This method improves reliability, sensitivity and sample throughput, and shortens the analysis time compared to analysis methods using off-line solid-phase extraction.     

Comparative analysis of bias in the collection of airborne pollutants: Tests on major aromatic VOC using three types of sorbent-based methods

This study was undertaken to establish one of the most reliable sampling methods and to precisely evaluate the bias involved in the collection of airborne pollutant samples. For the purpose of our study, we investigated the performance of three different types of sampling techniques by measuring major aromatic volatile organic compounds (VOC) in outdoor air; the target analytes specifically include benzene, toluene, ethylbenzene, and xylene (commonly called BTEX). As the first step of our approach, we designed and developed a multi-channel sampling system consisting of a six-port mass flow controller (SJU-MFC) system. Because this system allowed the collection of up to six replicate samples, our measurement results were analyzed and screened statistically for the derivation of high-quality BTEX data. The feasibility of this sampling system was further tested through a comparison with concurrent measurement data sets obtained by two additional, but independent, sampling techniques: (1) automatic continuous sampler (ACS) and (2) on-line GC (O-GC) system. Based on the data sets collected concurrently by three different sampling methods, we attempted to evaluate the compatibility of sampling techniques. Although the results obtained by SJU-MFC system were not statistically different from those of the O-GC system, they were moderately distinguishable from those of ACS. Such patterns were seen consistently, when examined by correlation analysis. The overall results of our study thus generally point out that the compatibility of data sets, when the proper caution is taken, improve significantly among different sampling methodologies.     

Heterogeneous Shvo-type ruthenium catalyst: dehydrogenation of alcohols without hydrogen acceptors

A Shvo-type diruthenium complex is heterogenized by a sol-gel process, which catalyzes the conversion of alcohols to carbonyl compounds and molecular hydrogen without any additive. The heterogeneous catalyst is recoverable by simple filtration, stable in the air, and reusable.     

Preparation and characterization of self-assembled nanoparticles based on glycol chitosan bearing adriamycin

An anthracycline drug, adriamycin, was chemically conjugated onto the backbone of glycol chitosan via an acid-labile cis-aconityl linkage. The physicochemical characteristics of the glycol chitosan–adriamycin (GC–ADR) conjugates were investigated by dynamic light scattering, atomic force microscopy, and fluorescence spectroscopy. The GC–ADR conjugates were capable of forming nano-sized self-aggregates in an aqueous medium, when the adriamycin content in the conjugate was in the range of 2.0–5.0 wt.%. The self-aggregates were spherical in shape, and had mean diameters of 238–304 nm, depending on the adriamycin content. The critical aggregation concentrations of the conjugates, estimated by the fluorescence quenching method, were as low as 1.0–2.5×10⁻² mg/ml. The size of self-aggregates was not affected by the polymer concentration in the range from 50 to 2,000 μg/ml, and was maintained up to 8 days in phosphate-buffered saline (pH 7.4), indicating high colloidal stability. The release of adriamycin from self-aggregates was significantly dependent on the pH of the medium due to the cis-aconityl linkage; e.g., the amount of adriamycin released for 4 days was 7.3±0.3% at pH 7, whereas it was 29.3±1.9% at pH 4. The cell viability results demonstrated that free adriamycin shows more potent cytotoxicity than the conjugates, primarily attributed to the sustained release of adriamycin from self-aggregates. In conclusion, the self-aggregates, formed by GC–ADR conjugates, might be useful for the site-specific delivery of adriamycin in a sustained manner.     

Synthesis, photophysical and electrochemical properties and theoretical studies on three novel indolo[3,2-b]carbazole derivatives containing benzothiazole units

Three novel indolo[3,2-b]carbazoles derivatives were successfully synthesized by condensation reaction and structurally characterized by elemental analysis, mass spectrometry and proton nuclear magnetic resonance spectroscopy methods, which belong to donor-π-acceptor systems comprising an indolo[3,2-b]carbazole group as an electron donor and two benzothiazole rings as electron acceptors. The thermal, electrochemical and photophysical properties of the compounds were characterized by thermogravimetric analysis combined with electrochemistry, UV-vis absorption spectroscopy and fluorescence spectroscopy. On the other hand, the geometries, molecular orbitals, charge-injection and transport properties were determined by quantum chemical calculations. The results show that the compounds synthesized exhibit good thermal stability and high fluorescence quantum yields, indicating the potential application as optoelectronic materials.