Electrical and humidity sensing properties of synthesized hydrophosphoric acid doped polyaniline

H₃PO₄ doped polyaniline was synthesized by a single‐step chemical polymerization method using ammonium persulfate as an oxidizing agent. The material characterization was done by SEM, UV–vis spectroscopy and thermogravimetric analysis (TGA). The pellets of the synthesized material were used to study the electrical properties, using a four‐probe method. The room temperature electrical conductivity is found to be 0.2201 S/cm. The electrical resistance in response to the varying humid environment (ranging between 20 and 100% RH) is recorded to evaluate the sensitivity of the H₃PO₄ polyaniline samples toward humidity. The resistance of the samples is found to vary by three orders of magnitude for 20–100% RH and is found to decrease with increasing humidity. The response and recovery time are observed to be 12–14 and 26–30 sec, respectively. Copyright © 2007 John Wiley & Sons, Ltd.     

Deacylation studies on furanose triesters using an immobilized lipase: synthesis of a key precursor for bicyclonucleosides

Lipozyme TL IM immobilized on silica catalyses the deacylation of 4-C-acyloxymethyl-3,5-di-O-acyl-1,2-O-(1-methylethylidene)-beta-L-threo-pentofuranose to form 3,5-di-O-acyl-4-C-hydroxymethyl-1,2-O-(1-methylethylidene)-alpha-d-xylo-pentofuranose in a highly selective and efficient manner.     

Thorium under strong compression—a test case for the evaluation of EOS data by different forms and procedures

Abstract

X-ray diffraction on Thorium under pressures to 300 GPa at ambient temperature provides new EOS data for both the (low pressure) fcc phase as well as for the (high pressure) bct phase. A detailed evaluation of these data and a comparison with previous results shows systematic differences in the fitted parameters resulting from the use of different EOS forms and from the correlations in the parameters used in all these fitting procedures. The absolute uncertainties in these parameters are elucidated and special attention is given to the compatibility of different EOS forms for phases which are related by second order transitions.     

Thorium: Phase transformations and equation of state to 300 GPa

Abstract

Equation of state and phase transformations of thorium metal have been investigated to 300 GPa at 300 K in a diamond anvil cell using energy dispersive X-ray diffraction employing synchrotron source. Phase transformations in the 70–100 GPa range indicative of 5f-electron bonding are observed and thorium metal is isostructural with its 4f counterpart cerium at ultra high pressures. The measured static equation of state of thorium to 300GPa (volume fraction V/V _o = 0.40) at 300K is given. At high pressures, the sd to f electronic transfer has significant influence on the measured equation of state of thorium.     

Pd(OAc)2-Catalyzed Carbonylative Coupling of Aryl Iodide with Ortho-Haloamines in Water

The carbonylative cross coupling of aryl iodide with ortho-haloaniline to ortho-haloanilide using phosphine-free Pd(OAc)₂ catalyst in water as a reaction medium has been studied. The present protocol facilitated the reaction of o-haloanilines with a wide variety of hindered and functionalized aryl iodides, affording good yields of the desired products. The protocol was also extended for the synthesis of benzoxazoles through cyclization of ortho-haloanilide using Cu(acac)₂ catalyst.     

Effect of substituent polarity,bulk, and substitution site toward enhancing gas permeation in dibromohexafluorobisphenol‐a based polyarylates

The gas permeation properties of polyarylates were tuned by varying nature and site of substituents present on both of its monomers, viz., bisphenol and dicarboxylic acid. The phenyl rings of hexafluorobisphenol‐A were substituted in asymmetric manner by polar bromine to obtain dibromohexafluorobisphenol‐A. This bisphenol was polymerized with equimolar mixture of iso‐ and terephthalic acid (base case), bromo‐ and nitroterephthalic acid (polar group substituted acids), 4,4′‐hexafluoroisopropylidene bis(benzoic acid), and t‐butyl isophthalic acid (bulky group containing acids). Physical properties and gas permeation properties of these polyarylates were investigated to assess combined effects of asymmetric nature of bisphenol substitution, polar nature of substituent bromine, hexafluoroisopropylidene group present at the bridge position of bisphenol, and substituent present on the acid moiety. The combination of these substituent types led these polyarylates to lie near Robeson upper bound. The gas sorption analysis and estimation of diffusivity in these polyarylates shed a light on observed variations in gas permeation properties by attempted structural variations. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3156–3168, 2007     

Synthesis of 1,4-Benzothiazine Compounds Containing Isatin Hydrazone Moiety as Antimicrobial Agent

A series of novel 3‐methyl‐N"‐(2‐oxoindolin‐3‐ylidene)‐4H‐benzo[b][1,4]thiazine‐2‐carbohyrazides have been synthesized and studied on their in vitro antimicrobial activity potency to establish structure‐activity relationship. Several compounds demonstrated promising antifungal and antibacterial activity; however, other tested compounds exhibited moderate to poor antimicrobial activity with respect to the reference drug against the test strains.     

Breakage rate of colloidal aggregates in shear flow through stokesian dynamics

We study the first breakage event of colloidal aggregates exposed to shear flow by detailed numerical analysis of the process. We have formulated a model, which uses stokesian dynamics to estimate the hydrodynamic interactions among the particles in a cluster, van der Waals interactions and Born repulsion to describe the normal interparticle interactions, and the tangential interactions through discrete element method to account for contact forces. Fractal clusters composed of monodisperse spherical particles were generated using different Monte Carlo methods, covering a wide range of cluster masses (N(sphere) = 30-215) and fractal dimensions (d(f) = 1.8-3.0). The breakup process of these clusters was quantified for various flow magnitudes (γ), under both simple shear and extensional flow conditions, in terms of breakage rate constant (K(B)), mass distribution of the produced fragments (FMD, f(m,k)), and critical stable aggregate mass (N(c)), defined as the largest cluster mass that does not break under defined flow conditions. The breakage rate K(B) showed a power law dependence on the product of the aggregate size and the applied stress, with values of the corresponding exponents depending only on the aggregate fractal dimension and the type of flow field, whereas the prefactor of the power law relation also depends on the size of the primary particles comprising a cluster. The FMD was fitted by Schultz-Zimm distribution, and the parameter values showed an analogous dependence on the product of the aggregate size and the applied stress similar to the rate constant. Finally, a power law relation between the applied stress and corresponding largest stable aggregate mass was found, with an exponent value depending on the aggregate fractal dimension. This unique and detailed analysis of the breakage process can be directly utilized to formulate a breakage kernel used in solving population balance equations.