Lithium ion transport and ion-polymer interaction in PEO based polymer electrolyte plasticized with ionic liquid

The polyethylene oxide (PEO) based lithium ion conducting polymer electrolytes complexed with lithium trifluoromethanesulfonate (LiCF₃SO₃ or LiTf) plasticized with an ionic liquid 1-ethyl 3-methyl imidazolium trifluoromethanesulfonate (EMITf) have been reported. Morphological, spectroscopic, thermal and electrochemical investigations demonstrate promising characteristics of the polymer films, suitable as electrolyte in various energy storage/conversion devices. Significant structural changes have been observed in the polymer electrolyte due to the ionic liquid addition, investigated by X-ray diffraction (XRD) and optical microscopy. The ion-polymer interaction, particularly the interaction of imidazolium cation with PEO chains, has been evidenced by IR and Raman spectroscopic studies. The optimized composition of the polymer electrolyte i.e. PEO_25.LiTf + 40 wt.% EMITf offer room temperature ionic conductivity of ~ 3 × 10^− 4 S cm^− 1 with wide electrochemical stability window and excellent thermal stability. The ‘σ versus 1/T’ curves show apparent Arrhenius behavior below and above melting temperature. The ionic conductivity has been observed due to Li⁺ ions, as confirmed from ⁷Li-NMR studies, though the component ions of ionic liquid and anions also contribute significantly to the overall conductivity.     

Improvement of compatibility,mechanical, thermal and dielectric properties of poly(lactic acid) and poly(butylene adipate-co-terephthalate) blends and their composites with porous clay heterostructures from mixed surfactant systems

In this study, nanocomposite poly(lactic acid) and poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were prepared through polymer blending in the presence of multi-functional epoxy as a compatibilizer that could react with epoxy group and terminated end group of two phases to increase interfacial adhesion between PLA and PBAT and improve the toughness of PLA. The effects of porous clay heterostructure from mixed CTAB:CTAC surfactant in the mole ratio of 1:2 (B1C2-PCH) were also investigated. The elongation at break of the blends reached 38%, which was eight times that of neat PLA. The cryo-fractured surface demonstrated the interfacial adhesion caused by the interaction of the epoxy group of the reactive compatibilizer with the terminal carboxyl and hydroxyl groups of PLA and PBAT. Moreover, PBAT reduced the crystallization rate and percent crystallinity of the PLA matrix and further decreased when compatibilizer was used. Alternatively, B1C2-PCH accelerated the heterogeneous nucleation and crystallization of the nanocomposite films. After adding small amount of B1C2-PCH, the nanocomposite films demonstrated excellent dielectric properties. Therefore, the improvement of PLA/PBAT nanocomposite blends are capable to be further developed as polymeric capacitor films.     

Isolation,structural elucidation and cytotoxicity evaluation of a new pentahydroxy-pimarane diterpenoid along with other chemical constituents from Aerva lanata

Aervalanata possesses various useful medicinal and pharmaceutical activities. Phytochemical investigation of the plant has now led to the isolation of a new 2α,3α,15,16,19-pentahydroxy pimar-8(14)-ene diterpenoid (1) together with 12 other known compounds identified as β-sitosterol (2), β-sitosterol-3-O-β-D-glucoside (3), canthin-6-one (4), 10-hydroxycanthin-6-one (aervine, 5), 10-methoxycanthin-6-one (methylaervine, 6), β-carboline-1-propionic acid (7), 1-O-β-D-glucopyranosyl-(2S,3R,8E)-2-[(2′R)-2-hydroxylpalmitoylamino]-8-octadecene-1,3-diol (8), 1-O-(β-D-glucopyranosyl)-(2S,3S,4R,8Z)-2-[(2′R)-2′-hydroxytetracosanoylamino]-8(Z)-octadene-1,3,4-triol (9), (2S,3S,4R,10E)-2-[(2′R)-2′-hydroxytetracosanoylamino]-10-octadecene-1,3,4-triol (10), 6′-O-(4″-hydroxy-trans-cinnamoyl)-kaempferol-3-O-β-D-glucopyranoside (tribuloside, 11), 3-cinnamoyltribuloside (12) and sulfonoquinovosyldiacylglyceride (13). Among these, six compounds (8–13) are reported for the first time from this plant. Cytotoxicity evaluation of the compounds against five cancer cell lines (CHO, HepG2, HeLa, A-431 and MCF-7) shows promising IC₅₀ values for compounds 4, 6 and 12.     

A cesium fluoride promoted efficient and rapid multicomponent synthesis of functionalized 2-amino-3-cyano-4H-pyran and spirooxindole derivatives

A rapid, one-pot and highly efficient protocol for the synthesis of pharmaceutically interesting functionalized 2-amino-3-cyano-4H-pyran and spirooxindole derivatives has been developed using commercially available Cs F as a catalyst in the reaction of malononitrile and aryl aldehydes or isatins with 1,3-cyclohexanediones. The major advantages of this methodology are excellent yield at ambient temperature, very short reaction time(5–10 min), and use of an inexpensive catalyst.     

Thermal and spectral properties of alkali metal complexes of 2-hydroxy-1,4-naphthoquinone

Thermal and spectral studies of reactions between 2-hydroxy-1,4-naphthoquinone (lawsone) and sodium metal (Lw-1, Lw-1A, Lw-1B), CH₃COONa (Lw-2), NaOH (Lw-3), KOH (Lw-4), K₂CO₃ (Lw-5), Tris buffer (Lw-6), ammonia (Lw-7) are studied. Red solids of Lw-1 to Lw-7, Lw-1A, and Lw-1B were isolated and are characterized by elemental analysis, FT-IR, ¹H NMR and UV–Visible spectroscopy. FT-IR spectra of Lw-1A and Lw-1B show, ν _OH of adsorbed as well as coordinated water molecules between 3,600–3,100 cm^?1 and decrease in ν _C=O frequency of lawsone ligand. The benzenoid ring protons C(5)H, C(8)H, C(6)H and C(7)H in Lw-1A and Lw-1B show upfield shift in ¹H NMR spectra. Hypsochromic shift and bathochromic shift is observed to π–π* transition band (~329 nm) and charge transfer band (~455 nm), respectively in UV–Visible spectra of all compounds. Pyrolytic decomposition of all compounds is studied by nonisothermal TG studies in air. Step I in all compounds leads to loss of adsorbed water molecules. Decomposition of lawsone anion in all compounds occurs in two or more steps. Thermodynamically Lw-1 to Lw-7, Lw-1A and Lw-1B are different compounds and their decomposition mechanisms are varied. The respective metal oxide residue viz. (Na₂O or K₂O) obtained after complete decomposition of Lw-1 to Lw-5, Lw-1A, and Lw-1B, is analyzed by powder X-ray diffraction. The adsorbed as well as coordinated water molecules are revealed by DTA and DSC studies as endothermic peak at ~100 °C. Decomposition mechanisms for lawsone anion are proposed based on LC–MS, GC–MS, and TG studies. Thermal and spectral studies reveal the coordination of lawsone ligand in its naphthosemiquinone form with alkali metal ions.     

Synthesis and antimycobacterial screening of new 4-(4-(1-benzyl-1H-1,2,3-triazol-4-yl)-1-phenyl-1H-pyrazol-3-yl)quinoline derivatives

A new series of 4-(4-(1-benzyl-1H-1,2,3-triazol-4-yl)-1-phenyl-1H-pyrazol-3-yl)quinoline ( 6a-t ) have been synthesized by a click reaction of 4-(4-ethynyl-1-phenyl-1H-pyrazol-3-yl)quinoline ( 4a-d ) with a substituted benzyl azide ( 5a-e ). The starting alkyne derivatives 4a-d are obtained from Bestmann-Ohira reaction of 1-phenyl-3-(quinolin-4-yl)-1H-pyrazole-4-carbaldehyde and dimethyl(1-diazo-2-oxopropyl)phosphonate. The newly synthesized compounds are screened against M. tuberculosis H37Ra dormant and active, Escherichia coli, Pseudomonas fluorescence, Staphylococcus aureus and Bacillus subtilis strains at 30 μg/mL concentration. Most of the screened compounds showed good to moderate antibacterial activity against S. aureus, B. subtilis, and Mycobacterium tuberculosis H37Ra strains. The synthesized derivatives of quinolinyl-pyrazole-4-carbaldehyde and quinolinyl-pyrazole-4-ethyne reportd good to moderate activity against both strains of M. tuberculosis H37Ra. Ten derivatives of quinolinyl-pyrazole presented good activity against B. subtilis. These results suggested that further optimization and development of quinolinyl-pyrazolyl-1,2,3-triazole moeity could serve as lead compounds for antimycobacterial activity.     

Electronic structure description of a [Co(III)3Co(IV)O4] cluster: a model for the paramagnetic intermediate in cobalt-catalyzed water oxidation

Multifrequency electron paramagnetic resonace (EPR) spectroscopy and electronic structure calculations were performed on [Co(4)O(4)(C(5)H(5)N)(4)(CH(3)CO(2))(4)](+) (1(+)), a cobalt tetramer with total electron spin S = 1/2 and formal cobalt oxidation states III, III, III, and IV. The cuboidal arrangement of its cobalt and oxygen atoms is similar to that of proposed structures for the molecular cobaltate clusters of the cobalt-phosphate (Co-Pi) water-oxidizing catalyst. The Davies electron-nuclear double resonance (ENDOR) spectrum is well-modeled using a single class of hyperfine-coupled (59)Co nuclei with a modestly strong interaction (principal elements of the hyperfine tensor are equal to [-20(±2), 77(±1), -5(±15)] MHz). Mims (1)H ENDOR spectra of 1(+) with selectively deuterated pyridine ligands confirm that the amount of unpaired spin on the cobalt-bonding partner is significantly reduced from unity. Multifrequency (14)N ESEEM spectra (acquired at 9.5 and 34.0 GHz) indicate that four nearly equivalent nitrogen nuclei are coupled to the electron spin. Cumulatively, our EPR spectroscopic findings indicate that the unpaired spin is delocalized almost equally across the eight core atoms, a finding corroborated by results from DFT calculations. Each octahedrally coordinated cobalt ion is forced into a low-spin electron configuration by the anionic oxo and carboxylato ligands, and a fractional electron hole is localized on each metal center in a Co 3d(xz,yz)-based molecular orbital for this essentially [Co(+3.125)(4)O(4)] system. Comparing the EPR spectrum of 1(+) with that of the catalyst film allows us to draw conclusions about the electronic structure of this water-oxidation catalyst.     

Antifungal activity of plumericin and isoplumericin

This study evaluated the in vitro antifungal activity of the chloroform extract of Plumeria bicolor and its phytoconstituents plumericin and isoplumericin against Candida species and Cryptococcus neoformans by measuring the Minimum Inhibitory Concentration (MIC) and Minimum Fungicidal Concentration (MFC). Plumericin's consistently high activity against Candida albicans, C. krusei, C. glabrata, C. tropicalis and Cryptococcus neoformans was more potent than isoplumericin and the standard antifungal drug nystatin suggesting its potential as a drug candidate for candidiasis and cryptococcosis.     

Micelles from PEO-PPO-PEO block copolymers as nanocontainers for solubilization of a poorly water soluble drug hydrochlorothiazide

The effect of molecular characteristics of EO-PO triblock copolymers viz. Pluronic(?) P103 (EO(17)PO(60)PEO(17)), P123 (EO(19)PO(69)EO(19)), and F127 (EO(100)PO(65)EO(100)) on micellar behavior and solubilization of a diuretic drug, hydrochlorothiazide (HCT) was investigated. The critical micellization temperatures (CMTs) and size for empty as well as drug loaded micelles are reported. The CMTs and micelle size depended on the hydrophobicity and molecular weight of the copolymer; a decrease in CMT and increase in size was observed on solubilization. The solubilization of the drug hydrochlorothiazide (HCT) in the block copolymer nanoaggregates at different temperatures (28, 37, 45°C), pH (3.7, 5.0, 6.7) and in the presence of added salt (NaCl) was monitored by using UV-vis spectroscopy and solubility data were used to calculate the solubilization characteristics; micelle-water partition coefficient (P) and thermodynamic parameters of solubilization viz. Gibbs free energy (ΔG(s)°), enthalpy (ΔH(s)°) and entropy (ΔS(s)°). The solubility of the drug in copolymer increases with the trend: P103>P123>F127. The solubilized drug decreased the cloud point (CP) of copolymers. Results show that the drug solubility increases in the presence of salt but significantly enhances with the increase in the temperature and at a lower pH in which drug remains in the non-ionized form.