NMR Characterization of Complex p‐Oligophenyl Scaffolds by Means of Aliasing Techniques to Obtain Resolution‐Enhanced Two‐Dimensional Spectra

The usefulness of computer‐assisted aliasing to secure maximal resolution of signal clusters in ¹H‐ and ¹³C‐NMR spectra (which is essential for structure determination by HMBC 2D NMR spectroscopy) in minimal acquisition time is exemplified by the complete characterization of the two complementary p‐octiphenyls 1 and 2 with complex substitution patterns. The need for digital resolution near 1 Hz/pt to dissect the extensive signal clusters in the NMR spectra of these refined oligomers excluded structure determination under routine conditions. High resolution was secured by exploiting the low signal density in the ¹³C dimension of HMBC spectra by using computer‐assisted aliasing to maximize signal density. Based on the observed shifts in DEPT and ¹H‐decoupled ¹³C‐NMR spectra of 1 and 2 , computer‐assisted aliasing allowed to reduce the number of required time increments by a factor of 20 to 30 compared to full‐width spectra with identical resolution. Without signal‐to‐noise constraints, this computer‐assisted aliasing reduced the acquisition time for high‐resolution NMR spectra needed for complete characterization of refined oligomers 1 and 2 by the same factor (e.g., from over a day to about an hour). With resolved signal clusters in fully aliased HSQC and HMBC spectra, unproblematic structure determination of 1 and 2 is demonstrated by unambiguous assignment of all C‐ and H‐atoms. These findings demonstrate that computer‐assisted aliasing of the underexploited ¹³C dimension makes extensive molecular complexity accessible by conventional multidimensional heteronuclear NMR experiments without extraordinary efforts.     

The production and properties of polylactide composites filled with expanded graphite

Composites have been produced by melt-blending biodegradable polylactide (PLA) with commercially available expanded graphite (EG). Using different techniques of addition, the manifold effects of EG on PLA molecular, thermo-mechanical and fire-retardant properties were evaluated. The EG nanofiller provides PLA composites with competitive functional properties. They have a high rigidity, with Young's modulus and storage modulus increasing with EG content. They also have excellent thermal stability while preserving the glass transition and melting temperature of the original PLA matrix. Purification and pre-dispersion of EG nanofiller proved beneficial for preserving PLA molecular weights and led to improved mechanical performance. The presence of dispersed graphene nanolayers in PLA significantly accelerated the polyester crystallization process. The flame retardant properties also displayed improvements with a large decrease in the maximum rate of heat release as recorded by cone calorimetry, whereas the horizontal burning test (UL94 HB) was successfully passed revealing non-dripping and char formation.     

Poly(phenylsilsesquioxane)s: Structural and morphological characterization

Poly(phenylsilsesquioxane) (PPSQ) polymers that were obtained from different synthetic routes were comparatively studied. The polymers were characterized by infrared and solid‐state ²⁹Si NMR spectroscopies. According to the results of X‐ray diffraction and thermogravimetric analyses, the materials richest in silanol showed a less organized network and lower weight loss temperature. The morphology of the products was influenced by the preparation conditions. PPSQ, with a morphology rich in spherical particles, was achieved with an n‐hexadecyltrimethylammonium bromide template in the reaction medium, whereas the morphology of this polymer obtained in the absence of the template was featureless. Small‐angle X‐ray scattering analyses revealed that the PPSQ samples showed a predominance of surface‐fractal behavior. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1580–1589, 2000     

Novel approach for the simultaneous detection of DNA from different fish species based on a nuclear target: quantification potential

The development of DNA-based methods for the identification and quantification of fish in food and feed samples is frequently focused on a specific fish species and/or on the detection of mitochondrial DNA of fish origin. However, a quantitative method for the most common fish species used by the food and feed industry is needed for official control purposes, and such a method should rely on the use of a single-copy nuclear DNA target owing to its more stable copy number in different tissues. In this article, we report on the development of a real-time PCR method based on the use of a nuclear gene as a target for the simultaneous detection of fish DNA from different species and on the evaluation of its quantification potential. The method was tested in 22 different fish species, including those most commonly used by the food and feed industry, and in negative control samples, which included 15 animal species and nine feed ingredients. The results show that the method reported here complies with the requirements concerning specificity and with the criteria required for real-time PCR methods with high sensitivity.     

Non-linear magnetic behavior around zero field of an assembly of superparamagnetic nanoparticles

The MIAplex? device is a miniaturized detector, devoted to the high sensitive detection of superparamagnetic nanoprobes for multiparametric immunoassays. It measures a signal corresponding to the second derivative of the magnetization around zero field. Like any new technology, the real success of the MIAplex? detector can only be exploited through a deep understanding of the magnetic signature. In this letter, we study the magnetic behavior around zero-field of diluted lab-made and commercial ferrofluids by comparing together conventional SQUID magnetization and MIAplex? signature.     

Phase-dependent photochromism of a lactone-stabilized chromene from a flavylium reaction network

New trans‐2‐hydroxychalcones bearing a carboxylate group at position 2′ ( Ct ^?) were synthesized (compounds 2 and 3 ). These compounds lead to a network of chemical reactions depending on pH value, light, and solvent. In water, when the pH value is lowered, the ionized trans‐chalcone is protonated and the flavylium cation A H⁺ is formed at very acidic pH values through hemiketal B and cis‐chalcone Cc , with global acidity constants of pK′_a ≤?1 and ≈0.1, respectively, for 2 and 3 . The electron‐acceptor character of the carboxylic substituent not only increases the observed acidity of the flavylium cation, but also decreases the rate of the ring‐opening/‐closing from a subsecond timescale to hours relative to model compound 1 (without carboxylate). The photochemistry of the network was studied in detail by means of continuous irradiation, monitored by UV/Vis absorption and ¹H and ¹³C NMR spectroscopic analysis. Although compound 3 is only slightly photoactive, compound 2 ( Ct^? ) reacts in aqueous solutions (λ_irr=313 nm) to form B^? and Cc^? , with a global quantum yield of 0.15, and fully reverts back to Ct^? with a rate constant of k=6.7×10^?5 s^?1. The flavylium cation is no longer formed in methanol, and irradiation of Ct^? leads to the formation of B ^? and the new lactone‐trapped chromene species La . The formation of La takes place through a sequence of three photochemical steps: photoisomerization of Ct ^?, photo‐ring‐closing reaction of Cc ^?, and photolactonization of B ^?. Only the cis/trans isomerization and ring‐closing reactions are thermally reversible on a timescale of seconds and hours, respectively. A photochromic system was achieved in rigid matrices of methanol (at 77 K) and 1‐dodecanol (5 °C) by irradiating lactone La to give a red ortho‐quinone allide through a photo‐ring‐opening reaction; the color disappears with a rate constant of k=1.25×10^?2 s^?1 in 1‐dodecanol at 5 °C.     

Physicochemical properties of non-stoichiometric oxides

One of the most important challenges with solid oxide fuel cells (SOFC) is to find cathode materials with high enough catalytic activity for the dissociation of the molecular oxygen. Oxide mixed conductors with the perovskite structure (ABO₃) and high Co content in the B site have been extensively studied to be used as cathode in SOFC. This is the second part of a review of high temperature properties of two mixed conductors systems. The first part was focused on the n = 2 Sr₃FeMO_6+δ (M = Fe, Co, Ni) Rudlesdden Popper phases, while in this paper we discuss the thermodynamic and transport properties of the perovskite solid solution Sr_1−x La _x Fe_0.2Co_0.8O_3−δ (0 ≤ x ≤ 0.4) in the temperature range 773 ≤ T ≤ 1173 K. In particular, the interest has been focused on the x = 0 sample, which exhibits large ionic conductivity values (σ_i ~1 S cm⁻¹), but suffers a structural transformation from cubic to orthorhombic symmetry because the ordering of the oxygen vacancies when the oxygen partial pressure decreases. Measurements of the oxygen chemical potential ( m_\textO2 \mu_{{{\text{O}}_{2} }} ) as function of oxygen content and temperature, coupled with high temperature X-ray diffraction data, permitted us to broaden the knowledge of the T–δ–p(O₂) phase diagram for the x = 0 sample. In addition, we have investigated the effects of the La incorporation on the stability range of the cubic phases of the Sr_1−x La _x Fe_0.2Co_0.8O_3−δ solid solution.     

Speciation of trace metals in natural waters: the influence of an adsorbed layer of natural organic matter (NOM) on voltammetric behaviour of copper

The influence of an adsorbed layer of the natural organic matter (NOM) on voltammetric behaviour of copper on a mercury drop electrode in natural water samples was studied. The adsorption of NOM strongly affects the differential pulse anodic stripping voltammogram (DPASV) of copper, leading to its distortion. Phase sensitive ac voltammetry confirmed that desorption of adsorbed NOM occurs in general at accumulation potentials more negative than −1.4 V. Accordingly, an application of negative potential (−1.6 V) for a very short time at the end of the accumulation time (1% of total accumulation time) to remove the adsorbed NOM was introduced in the measuring procedure. Using this protocol, a well-resolved peak without interferences was obtained. It was shown that stripping chronopotentiogram of copper (SCP) in the depletive mode is influenced by the adsorbed layer in the same manner as DPASV. The influence of the adsorbed NOM on pseudopolarographic measurements of copper and on determination of copper complexing capacity (CuCC) was demonstrated. A shift of the peak potential and the change of the half-peak width on the accumulation potential (for pseudopolarography) and on copper concentration in solution (for CuCC) were observed. By applying a desorption step these effects vanished, yielding different final results.     

Benzodicarbomethoxytetrathiafulvalene derivatives as soluble organic semiconductors

A series of new tetrathiafulvalene (TTF) derivatives bearing dimethoxycarbonyl and phenyl or phthalimidyl groups fused to the TTF core (6 and 15-18) has been synthesized as potential soluble semiconductor materials for organic field-effect transistors (OFETs). The electron-withdrawing substituents lower the energy of the HOMO and LUMO levels and increase the solubility and stability of the semiconducting material. Crystal structures of all new TTF derivatives are also described, and theoretical DFT calculations were carried out to study the potential of the crystals to be used in OFET. In the experimental study, the best performing device exhibited a hole mobility up to 7.5 × 10(-3) cm(2) V(-1) s(-1)).     

Effect of the irrigation with residual wastewaters on microbial soil activity of the ornamental flowers (<Emphasis Type="Italic">Dahlia pinnata)</Emphasis> cultures monitored by isothermal calorimetry

A microcalorimetric method was applied to study microbial soil activity of ornamental flower (Dahlia pinnata) plantations when irrigated with potable water and wastewaters. The samples were irrigated with potable water PW sample (reference) and treated wastewaters from Municipal Wastewater Treatment Station of Asa Norte in Brasilia City (Brazil). Three different water treatments were applied to irrigate soil samples, named TW1, TW2, and TW3 samples. The increase of the microbial soil activity observed in TW1 sample must have occurred because of the high amount of organic waste dissolved in wastewater used for irrigation. This rise indicates that the present treated wastewater can affect natural life cycle. However, only a low alteration in microbial soil activity was observed in the TW2 and TW3 samples, which suggests that these wastewater treatments can be normally used to irrigate soils without bringing environmental consequences, once they offer a great opportunity to upgrade and protect the environment.