An investigation on planar dielectric light collectors for illumination and solar energy applications

In this paper the performances of inhomogeneous dielectric slabs as solar light collectors for both illumination and solar energy applications are analysed.     

Search for a reliable methodology for PSD determination based on a combined molecular simulation-regularization-experimental approach: The case of PHTS materials

We present here a methodology for searching a robust pore size distribution (PSD) for adsorbent materials. The method is based on a combination of individual adsorption isotherms, obtained from Grand Canonical Monte Carlo simulations, a regularization procedure to invert the adsorption integral equation (Tikhonov regularization solved by singular value decomposition), and the needed experimental adsorption isotherm. The selection of several parameters from the available choices to start the procedure are discussed here: the size of the kernel (number of individual pores and number of experimental adsorption points to be included), the fulfillment of the Discrete Picard condition, and the L-curve criteria, all leading to find a reliable and robust PSD. The procedure is applied to plugged hexagonal templated silicas (PHTS), synthesized, and characterized in our laboratory.     

An AFM, XPS and electrochemical study of molecular electroactive monolayers formed by wet chemistry functionalization of H-terminated Si(1 0 0) with vinylferrocene

Molecular electroactive monolayers have been produced from vinylferrocene (VFC) via light-assisted surface anchoring to H-terminated n- and p-Si(1 0 0) wafers prepared via wet chemistry, in a controlled atmosphere. The resulting Si-C bound hybrids have been characterized by means of XPS and AFM. Their performance as semiconductor functionalized electrodes and their surface composition have been followed by combining electrochemical and XPS measurements on the same samples, before and after use in an electrochemical cell. White-light photoactivated anchoring at short (1 h) exposure times has resulted in a mild route, with a very limited impact on the initial quality of the silicon substrate. In fact, the functionalized Si surface results negligibly oxidized, and the C/Fe atomic ratio is close to the value expected for the pure molecular species. The VFC/Si hybrids can be described as (η⁵-C₅H₅)Fe²⁺(η⁵-C₅H₄)-CH₂-CH₂-Si species, on the basis of XPS results. Electrochemical methods have been applied in order to investigate the role played by a robust, covalent Si-C anchoring mode towards substrate-molecule electronic communication, a crucial issue for a perspective development of molecular electronics devices. The response found from cyclic voltammograms for p-Si(1 0 0) functionalized electrodes, run in the dark and under illumination, has shown that the electron transfer is not limited by the number of charge carriers, confirming the occurrence of electron transfer via the Si valence band. The hybrids have shown a noticeable electrochemical stability and reversibility under cyclic voltammetry (cv), and the trend in peak current intensity vs. the scan rate was linear. The molecule-Si bond is preserved even after thousands of voltammetric cycles, although the surface coverage, evaluated from cv and XPS, decreases in the same sequence. An increasingly larger surface concentration of Fe³⁺ at the expenses of Fe²⁺ redox centers has been found at increasing number of cv’s, experimentally associated with the growth of silicon oxide. Surface SiO⁻ groups from deprotonated silanol termination, induced by the electrochemical treatments, are proposed as the associated counterions for the Fe³⁺ species. They could be responsible for the observed decrease in the electron transfer rate constant with electrode ageing.     

Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension

The stress-strain state in the zone of load transfer in a uniaxially stretched specimen made of a unidirectional epoxy carbon-fiber-reinforced plastic (CFRP) is investigated. A parametric analysis of the influence of geometric and mechanical characteristics of the specimen on its stress-strain state is performed by means of finite-element modeling. The parameters allowing us to significantly reduce the dangerous concentration of transverse and tangential stresses are revealed. The mechanical tensile characteristics of a high-strength pultruded unidirectional CFRP are determined experimentally, and the size effect of its strength is estimated.     

Energy Spectrum Width and Nonequilibrium Energy of Rayleigh Waves Scattered on a Two-Dimensional Near-Surface Electron Layer

We obtain expressions for the energy spectrum widths of Rayleigh waves corresponding to their deformational coupling to Fermi and Boltzmann electrons in a two-dimensional layer near the surface of a semibounded solid. We evaluate the nonequilibrium energy of Rayleigh waves that depends on these widths and is caused by the same coupling to the corresponding hot electrons. We show that this energy is independent of the degeneracy degree of the electrons and is given by the mean energy of free Rayleigh waves heated up to temperature of the electrons. We find conditions under which the thermodynamics is determined by this nonequilibrium energy of Rayleigh waves in films of a certain thickness with Fermi electrons near the surface and by the equilibrium energy of bulk phonons in thicker samples. All the results are obtained using the Keldysh diagram technique applied to the case of semibounded media.     

53rd Meeting of the International Society of Electrochemistry

Russian Journal of Electrochemistry -     

Un principe d'invariance relatif à un processus généralisant le mouvement brownien N-dimensionnel

We prove that the generalized random walks associated to a root system R in $\text{R}{}^{\mathrm{N}}$ and a nonnegative multiplicity function k defined on R, converge in distribution (if suitably normalized) to a Markov process with càdlàg trajectories and infinitesimal generator a differential-difference operator on $\text{R}{}^{\mathrm{N}}$ which generalizes the usual Laplacian. To cite this article: L. Gallardo, L. Godefroy, C. R. Acad. Sci. Paris, Ser. I 338 (2004).     

Influence of seeded impurities on the fusion reactor operation

In order to study the influence of seeded impurities on ITER like reactor operation the COREDIV code has been extended to include the transport of several sputtered and/or injected impurities. In the COREDIV code the core plasma is treated in the frame of 1D radial transport model whereas in the edge the 2D multifluid code EPIT is used. The EPIT code solves in the slab geometry the MHD equations for densities and velocities for all ions species as well as for electron and ion temperatures. The iteration scheme in the code leads to steady state solution of coupled core and SOL system. The numerical results for Carbon and Nickel plate and seeded impurities Silicon and Neon are presented.     

Monotone Nonincreasing Random Fields on Partially Ordered Sets. I

For an arbitrary poset H and measure ρ on H × _R (where _R is the real axis), we construct a monotone decreasing stochastic field η_ρ and compute its finite-dimensional distributions. In the case where H is a Λ-semilattice and the measure ρ satisfies additional conditions, we compute various characteristics of the field η_ρ such as the expectation of the field value at a point, variance of the field value at a point, and correlation function of the field. The described construction of random fields gives a new method for constructing positive definite functions on posets. Bibliography: 6 titles.__________Translated from Zapiski Nauchnykh Seminarov POMI, Vol. 301, 2003, pp. 92–143.