纳米Y2O3/钴基合金激光熔覆层的组织

利用5 kW CO2激光器,在Ni基高温合金表面,熔覆纳米稀土氧化物(Y2O3)/钴基合金复合材料,制备了涂层.利用光学显微镜、扫描电镜及透射电镜分析了熔覆层的组织结构.结果表明: 熔覆层的主要相组成为γ-Co,ε-Co,Cr23C6和Y2O3;加入纳米Y2O3,凝固组织由细长的柱状树枝晶转变为较短的树枝晶;纳米Y2O3含量增大至1%时整个断面获得等轴晶组织;纳米Y2O3作为异质形核的核心,细化了组织;纳米Y2O3在熔覆层中分布不均匀,促进了γ-Co向ε-Co的转变;熔覆层的亚结构为堆跺层错.对熔覆层等轴组织形成机制进行了分析.     

Synthesis and utilization of monodisperse hollow polymeric particles in photonic crystals

We developed a process to fabricate 150-700 nm monodisperse polymer particles with 100-500 nm hollow cores. These hollow particles were fabricated via dispersion polymerization to synthesize a polymer shell around monodisperse SiO(2) particles. The SiO(2) cores were then removed by HF etching to produce monodisperse hollow polymeric particle shells. The hollow core size and the polymer shell thickness, can be easily varied over significant size ranges. These hollow polymeric particles are sufficiently monodisperse that upon centrifugation from ethanol they form well-ordered close-packed colloidal crystals that diffract light. After the surfaces are functionalized with sulfonates, these particles self-assemble into crystalline colloidal arrays in deionized water. This synthetic method can also be used to create monodisperse particles with complex and unusual morphologies. For example, we synthesized hollow particles containing two concentric-independent, spherical polymer shells, and hollow silica particles which contain a central spherical silica core. In addition, these hollow spheres can be used as template microreactors. For example, we were able to fabricate monodisperse polymer spheres containing high concentrations of magnetic nanospheres formed by direct precipitation within the hollow cores.     

氯化锂为添加剂制得的疏水聚偏氟乙烯不对称微孔膜的形态结构及其膜蒸馏性能

结合膜的形态结构研究了以 LiCl为添加剂制得的疏水 PVDF膜的膜蒸馏性能。与来用水溶液高分子添加剂制得的PVDF微孔膜相比,膜蒸馏性能有了较大提高,尤其具有更高的截留率。制得的微孔膜的蒸馏通量已接近商品膜的膜蒸馏通量,表明以LiCl为添加剂制得的PVDF疏水微孔膜是一种适用于膜蒸馏的较理想的疏水微孔膜。     

希土季铵盐配合物的研究——Ⅴ.[(n-C4H9)4N]3Nd(NCS)6的晶体结构研究

合成了硫氰酸合希土酸四丁基季铵盐配合物,测定了它们的远红外光谱及部分配合物的中红外光谱,结果表明,配合物中的NCS^-是以氮原子与Ln³⁺配位。用X射线单晶衍射法测定了[(n-C₄H₉)₄N]₃Nd(NCS)₆晶体的结构,结果表明,该晶体属单斜晶系,C_c空间群,晶胞参数为:a=25.188(8)Å,b=13.320(6)Å,c=25.322(8)Å,β=121.30(2)°,晶胞体积V=7258.9ų,每一晶胞中有四个配合物分子,中心离子Nd³⁺与六个来自NCS^-的氮原子配位,这六个氮位于配位正八面体的六个顶角上,构成配阴离子Nd(NCS)₆^3-,它与三个[(n-C₄H₉)₄N]⁺以静电引力结合成中心分子,所以晶体为离子型晶体。     

Cl+C2H6→HCl+C2H5反应的准经典轨线研究

用三原子模型的准经典轨线方法研究了Ｃｌ与Ｃ２Ｈ６（ｖ＝０，ｊ）的反应。计算结果表明，反应产物ＨＣｌ的角度分布基本上为各向同性，其振动分布处于基态，与实验结果相一致。对反应轨线的研究表明，该反应为一直接反应，而且反应碰撞在低及高的碰撞参数下的机理不一样，在低碰撞参数下反应碰撞是直接完成的，产物ＨＣｌ以向后散射为主，转动基本上是冷的，但比高碰撞参数下的热。在高的碰撞参数下则生成短寿命的碰撞复合物，产物     

CO2选择性氧化甲烷制C2烃催化剂La2O3/ZnO的氧化还原和CO2吸附性能

Ｌａ２Ｏ３／ＺｎＯ催化剂体系在以二氧化碳作为氧化剂的甲烷氧化偶联反应中具有很高的Ｃ２烃选择性和稳定性．采用ＣＯ２－ＴＰＤ－ＭＳ和ＴＰＲ技术考察了Ｌａ２Ｏ３／ＺｎＯ对ＣＯ２的吸附性质及其氧化还原行为．结果表明：（１）Ｌａ２Ｏ３／ＺｎＯ催化剂体系存在着强、弱两种碱中心，其中弱碱中心数量随样品中Ｌａ２Ｏ３含量增加而减少，强碱中心强度随样品中Ｌａ２Ｏ３含量增加而增强．（２）由于组分相互作用，高温下，Ｌａ２Ｏ３／ＺｎＯ易产生晶格氧空位，使之对ＣＯ２的吸附增强，吸附后的ＣＯ２与晶格氧作用形成立方晶型Ｌａ２Ｏ２ＣＯ３．（３）Ｌａ２Ｏ３／ＺｎＯ表面的Ｌａ３＋和Ｚｎ２＋可以部分被还原，由于组分间的相互作用，使得二者的还原都较单一组分存在时更难．（４）Ｈ２－ＣＯ２－Ｈ２氧化还原循环实验表明，Ｌａ２Ｏ３／ＺｎＯ表面被部分还原后，ＣＯ２可以将部分被还原的表面再氧化．在此基础上对Ｌａ２Ｏ３／ＺｎＯ催化剂上甲烷与ＣＯ２转化为Ｃ２烃的机制也进行了讨论．     

Synthesis and Structure of the Hexanuclear Diazenido－oxomolybdate ［（n－C_4H_9）_4N］_3［Mo_6O_（18）（N_2C_6H_4－p－NO_2）］

ＳｙｎｔｈｅｓｉｓａｎｄＳｔｒｕｃｔｕｒｅｏｆｔｈｅＨｅｘａｎｕｃｌｅａｒＤｉａｚｅｎｉｄｏ－ｏｘｏｍｏｌｙｂｄａｔｅ［（ｎ－Ｃ_４Ｈ_９）_４Ｎ］_３［Ｍｏ_６Ｏ_（１８）（Ｎ_２Ｃ_６Ｈ_４－ｐ－ＮＯ_２）］ＬｉＨａｉ－Ｌｉａｎ；ＹｏｕＸｉａｏ－Ｚｅｎｇ；...     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.     

Orientational ordering of a bent-core mesogen by two-dimensional 13C NMR spectroscopy

Various two-dimensional (2D) NMR techniques are reported on a bent-core mesogen 4,6-dichloro-1,3-phenylenebis[4'-(9-decenyloxy)-1,1'-biphenyl] carboxylate in its nematic and solid phases in order to unambiguously assign its carbon-13 NMR spectrum. The (13)C chemical shifts from the molecular core were studied as a function of temperature to extract its molecular geometry and orientational order tensor. To this end, the chemical shift anisotropy tensors of some carbon sites were measured in the solid state of this mesogen using a recent method called the separation of undistorted powder patterns by effortless recoupling (SUPER). The average bending angle subtended by the two arms of the bent-core structure is determined to be 148.7 degrees. The C-H dipolar couplings obtained from the separated local field (SLF) experiment for the aromatic rings are used to find the local order parameter tensors.