Determination of dopamine and its metabolites in small volumes of rat brain dialysates using small-bore liquid chromatography with electrochemical detection

A miniaturized liquid chromatographic system with electrochemical detection (LC-ED) was developed and applied to the analysis of dopamine and its metabolites in dialysate samples collected from the rat brain in vivo. An existing LC-ED system was down-scaled using a 1 mm I.D. small-bore column operated at a reduced flow-rate and with an injection volume of 1 microliter. With the small-bore system the limit of detection for dopamine of ca. 0.06 pg was almost 50 times less than with the conventional system, which represents a two-fold improvement in concentration sensitivity. Miniaturization was accomplished with negligible loss in resolution by using a conventional commercial amperometric detector with minor modifications. The results indicate that a number of useful advantages could be realized by the combination of this small-bore LC-ED system and the in vivo brain dialysis method.     

富氧条件下乙炔选择催化还原NOx

Acetylene as a reducing agent of metal exchanged HY catalysts, for selective catalytic reduction of NO in the reaction system of 0.16% NO, 0 （C2H2-SCR） was investigated over a series 08% C2H2, and 9.95% O2 （volume percent） in He. 75% of NO conversion to N2 with hydrocarbon efficiency about 1.5 was achieved over a Ce-HY catalyst around 300 ℃. The NO removal level was comparable with that of selective catalytic reduction of NOx by C3H6 reported in literatures, although only one third of the reducing agent in carbon moles was used in the C2H2-SCR of NO. The protons in zeolite were crucial to the C2H2-SCR of NO, and the performance of HY in the reaction was significantly promoted by cerium incorporation into the zeolite. NO2 was proposed to be the intermediate of NO reduction to N2, and the oxidation of NO to NO2 was rate-determining step of the C2H2-SCR of NO over Ce-HY. The suggestion was well supported by the results of the NO oxidation with O2, and the C2H2 consumption under the conditions in the presence or absence of NO.     

Fractal metal nanoparticle aggregates morphology formation mediated by polyelectrolyte/surfactant complex films at interfaces

In this work, the gold nanoparticle self-assembly behavior of mica-surface-confined polyelectrolyte/surfactant complex films was investigated. First, modified partially hydrated polyacrylamide (MHPAM)/hexadecyltrimethylammonium bromide (CTAB) complex films were deposited on the mica surface using Langmuir–Blodgett technique. Then, the preadsorbed MHPAM/CTAB complex film mica plate was dipped into the gold aqueous solution and the interesting fractal nanostructured gold network was formed. In addition, the effect of dipping time on gold nanoparticle self-assembly morphology was studied. The mechanism of formation process is briefly proposed.     

Synthesis of triphenylamine-cored dendritic two-photon absorbing chromophores

[structure: see text]. A new series of dendritic two-photon absorbing chromophores containing triphenylamine moiety as a core or branching points have been synthesized through a convergent synthetic strategy. One-photon and two-photon optical properties of these molecules were characterized. In the nanosecond time domain, these molecules exhibited large two-photon absorption (TPA) cross sections up to 7.56-12.2 x 10(-44) s cm(4) at 800 nm, indicating that these molecular structures were viable candidates for various two-photon related applications.     

NMR and MO Studies on the Molecular Structure of a Fluoranthene-Benzene Complex

Summary. Fluoranthene (FA) forms a 1:1 van der Waals complex with benzene in cyclohexane. The ¹H NMR spectrum of this complex shows that the FA moiety in the complex state has five kinds of hydrogen atoms and that the ¹H NMR peaks assigned to the protons attached to the naphthalene skeleton are largely shifted to higher magnetic field on complex formation with benzene. These observations indicate that the complex takes the structure of C_S symmetry, in which the benzene molecule mainly interacts with the electronic system localized on the naphthalene moiety of FA. The present ab initio calculations reproduce well the ¹H NMR spectral shifts mentioned above and the experimentally predicted C_S structure of the complex. According to the PPP calculations for the electronic absorption spectral changes on the complex formation, the FA-benzene complex is considered to take a sandwich type structure.     

Micro-sized Sb2O3 octahedra fabricated via a PEG-1000 polymer-assisted hydrothermal route

The micro-sized Sb₂O₃ octahedra can be synthesized on a large scale via a simple PEG-1000 polymer-assisted hydrothermal route (PAHR) in the temperature range of 160-180 °C for 10-14 h. The structures, compositions, and morphologies of the as-synthesized products are derived from X-ray power diffraction pattern, X-ray photoelectron spectra, and field emission scanning electronic microscope. Meanwhile, the optical properties of the micro-sized Sb₂O₃ octahedra are studied by their photoluminescene spectroscopy and Raman spectrum. Furthermore, the possible growth mechanism of the micro-metered Sb₂O₃ octahedra is discussed on the basis of a series of supplementary experiments. And it has been found that PEG-1000, sodium tartrate, the reaction temperature, and the reaction time have considerable effects on the final morphology of Sb₂O₃, while the pH value has an influence on the formation of the Sb₂O₃ crystals.     

Systematic synthesis and characterization of single-crystal lanthanide orthophosphate nanowires

A simple hydrothermal method has been developed for the systematic synthesis of lanthanide orthophosphate crystals with different crystalline phases and morphologies. It has been shown that pure LnPO(4) compounds change structure with decreasing Ln ionic radius: i.e., the orthophosphates from Ho to Lu as well as Y exist only in the tetragonal zircon (xenotime) structure, while the orthophosphates from La to Dy exist in the hexagonal structure under hydrothermal treatment. The obtained hexagonal structured lanthanide orthophosphate LnPO(4) (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy) products have a wirelike morphology. In contrast, tetragonal LnPO(4) (Ln = Ho, Er, Tm, Yb, Lu, Y) samples prepared under the same experimental conditions consist of nanoparticles. The obtained hexagonal LnPO(4) (Ln = La --> Tb) can convert to the monoclinic monazite structured products, and their morphologies remained the same after calcination at 900 degrees C in air (Hexagonal DyPO(4) is an exceptional case, it transformed to tetragonal DyPO(4) by calcination), while the tetragonal structure for (Ho--> Lu, Y)PO(4) remains unchanged by calcination. The resulting LnPO(4) (Ln = La --> Dy) products consist almost entirely of nanowires/nanorods with diameters of 5-120 nm and lengths ranging from several hundreds of nanometers to several micrometers. Europium doped LaPO(4) nanowires were also prepared, and their photoluminescent properties were reported. The optical absorption spectrum of CePO(4) nanowires was measured and showed some differences from that of bulk CePO(4) materials. The possible growth mechanism of lanthanide phosphate nanowires was explored in detail. X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, electron diffraction, infrared absorption spectra, X-ray photoelectron spectroscopy, optical absorption spectra, and photoluminescence spectra have been employed to characterize these materials.     

Copper-exchanged LTA zeolite membranes with enhanced water flux for ethanol dehydration

Phase-pure and well-intergrown Cu-LTA membranes are developed through copper ions exchange of sodium ions in Na-LTA framework. For pervaporation of 90.0 wt% ethanol/10.0 wt% water mixtures, the Cu-LTA membrane shows much higher water flux than Na-LTA membranes due to the enhancement of the pore size after ions exchange.     

Mass spectral fragmentation of (S,S)-2-substituted 4,4-diphenyl-3,1-oxazabicyclo[3.3.0]octanes: ring contraction of pyrrolidine and 1,3-oxazolidine in mass spectrometry

The mass spectral behaviour of (S,S)-2-substituted 4,4-diphenyl-3,1-oxazabicyclo[3.3.0]octanes has been studied with the aid of mass-analyzed ion kinetic energy spectrometry and accurate mass measurements under fast atom bombardment (FAB) and electron impact (EI) ionization conditions. Under FAB ionization, all compounds show a tendency to form protonated aldehyde or benzophenone ions and to form protonated 1-azabicyclo[3.1.0]hexane ions, which can further lose an ethylene or cyclopropane from the pyrrolidine ring to produce protonated 1-azabicyclo[1.1.0]butane ions and 3H-azirine ions, respectively. Under EI ionization, a similar fragmentation to that under FAB ionization was observed. The title compounds also show a tendency to yield oxirane ions and oxirenium ions by loss of pyrrolidine and pyrrolidine plus H. Ring contractions of 1,3-oxazolidine by loss of an aldehyde or ketone and of pyrrolidine by loss of an ethylene or cyclopropane were observed under both FAB and EI ionization conditions.     

A new insight into the adsorption of bovine serum albumin onto porous polyethylene membrane by zeta potential measurements, FTIR analyses, and AFM observations

The mode of adsorption of bovine serum albumin (BSA) on porous polyethylene (PE) membrane was studied as a function of time and concentration, which may contribute to the surface coverage. An improved physical model for adsorption is initiated based on the results of the adsorptional and desorptional measurements, FTIR analysis, and AFM observations as well as streaming potential measurements. The results obtained indicate that the adsorptional mode depend on both time and concentration. It is shown that a critical concentration (about 1000 ppm here) exists in the adsorptional process. Below this concentration, the adsorption seems to be conducted in a normal side-on way but time elapse gives rise to greater conformational change than concentration increase; above this concentration, the aggregation of protein molecular plays a decisive role and the adsorption is in an aggregation way, which is similar to end-on, but a relative large gap between the adsorbed molecules exists due to aggregation. This conclusion is general and can be expected to apply in other globular protein-hydrophobic porous surface systems.