Electrical interaction between two cylinders with an ion-penetrable charged membrane in an oil/water interface

The electrical interaction between two long, parallel cylinders each is covered by an ion-penetrable charged membrane immersed in an oil/water interface is investigated. The effects of contact angle, radius of cylinder, and membrane thickness on the electrical interaction force are examined. The results of numerical simulation reveal that the following conditions lead to a greater electrical interaction force: (i) a larger contact angle, i.e. a larger fraction of a cylinder in the oil phase; (ii) a larger cylinder radius; and (iii) a thinner membrane. For a fixed ionic strength, the electrical interaction force is insensible to the type of electrolytes in the water phase, in general. However, if two cylinders are close enough, then the higher the valence of counterions the greater the electrical interaction force.     

Flow injection chemiluminescence determination of polyhydroxy phenols using luminol-ferricyanide/ferrocyanide system

It was found that the weak chemiluminescence produced from the reaction of polyhydroxy phenols with luminol in alkaline solution could be strongly enhanced by ferricyanide and ferrocyanide. Based on this found, a new flow injection chemiluminescence method is proposed for the determination of four polyhydroxy phenols: pyrogallol, phlorglucinol, quinol and resorcinol. The detection limits of the method are 0.03 μg ml⁻¹ pyrogallol, 0.03 μg ml⁻¹ phlorglucinol, 0.04 μg ml⁻¹ quinol, and 0.02 μg ml⁻¹ resorcinol. The possible mechanism of CL reactions is also discussed briefly.     

Photophysical and photochemical processes of riboflavin (vitamin B2) by means of the transient absorption spectra in aqueous solution

Using time-resolved techniques of 337 and 248 nm laser flash photolysis, the photo physical and photochemical processes of riboflavin (RF, vitamin B₂) were studied in detail in aqueous solution. The excited triplet state of riboflavin (³RF^*) was produced with 337 nm laser, while under 248 nm irradiation, both³RF^* and hydrated electron (e_aq) formed from photoionization could be detected. Photobiological implications have been inferred on the basis of reactivity of³RF^* including energy transfer, electron transfer and hydrogen abstraction. The RF^·+ was generated by oxidation of SO₄ ^·-radical with the aim of confirming the results of photolysis.     

Synthesis,crystal structure,and properties of [Cu(LH)]2[M(mnt)2] [M = Ni or Cu; H2L = 3,3′-(1,3-propanediyldinitrilo)-bis(2-butanone oxime); mnt2− = maleonitriledithiolate] complexes containing bridging cyano groups

Interesting complexes containing a mnt^2– bridge, based on the reaction of [M(mnt)₂]^2– [M = Ni or Cu] with [Cu(LH)]⁺, have been prepared and characterized by e.s.m.s., i.r and u.v–vis. spectroscopic techniques and by electrochemistry. The complexes show weak antiferromagnetic interactions between magnetic centers. The X-ray analysis of the molecular structure of [Cu(LH)]₂[Ni(mnt)₂] has been completed. It structurally features the CN group of mnt^2– which can act as a bridging ligand between two transition metals.     

煤燃烧过程中表面结构变化的SEM图像分析

介绍了SEM图像分析的多种方法,并讨论了各自的描述能力,利用这些方法分析煤在燃烧各阶段SEM图像,通过研究得到煤在燃烧过程中表面分形维数的变化规律,同时可获得表面孔的某些参数变化历程。分析表明,淮南低变质煤在850℃燃烧过程中,煤焦颗粒表面的分维数有一个先变低后变高的过程,煤焦表面分维数在2.2至2.5区间内变化;同时孔径分布由近双曲线分布变化为近正态分布,孔油加权平均形状因子增加,在研究过程中发现,不同的计算方法会对图像的分形维数值产生影响,确定合适的计算方法是分形理论在煤燃烧领域中应用的关键。通过比较发现Xie法较为适合计算煤焦表面SEM图像。     

电喷雾质谱法中K^+加合离子受Cs^+影响及在牛膝多糖分子 量分布测定中的应用

以测定牛膝多糖的分子量分布为例,研究了在Cs^+存在情况下,电喷雾(ESI)/飞行时间质谱法(TOF-MS)中出现加合离子(adductions)的规律。实验中发现,牛膝多糖样品中加入适量的Cs^+,可影响其与Na^+,K^+加合离子的相对丰度,使K^+加合离子成为几乎唯一的加合离子形式,并获得了满意结果。另外讨论了Cs^+浓度、喷管电压(nozzlepotential)对这一现象的影响。     

改性钛锆复合氧化物催化环己酮肟气相Beckmann重 排反应

制备了经SO4^2-,PO4^3-,MoO3,WO3和B2O3改性的钛锆复合氧化物(TiO2-ZrO2)催化剂,并用常压连续流动固定床微型反应器考察了它们对环己酮肟气相Beckmann重排反应制己内酰胺的催化性能。结果表明,在反应温度300℃时,B2O3/TiO2-ZrO2具有较高的己内酰胺选择性(97.0%)和收率(96.7%),且明显高于B2O3/TiO2和B2O3/ZrO2催化剂,用N2吸附和NH3-TPD,CO2-TPD等方法对催化剂的经表面积、孔容、孔分布和表面酸、碱性分别进行了测定,讨论了这些物化性能对催化剂活性、选择性和稳定性的影响。     

两价钯催化下烯醇钯中间体和亲电试剂的反应研究

根据在两价钯催化的亲核试剂－炔烃－α,β-不饱和羰基化合物的串联加成反应中所假设的烯醇钯中间体的机理,研究了炔酸烯丙酯化合物1和亲电试剂在两价钯催化下的反应。使用乙酰氮作为亲电试剂得到了β－乙酰氧基烯基－γ－丁丙酯3,这一结果为烯醇钯中间体的机理提供了一个实验证据。     

Co (II)‐C12 alkyl carbon chain multi‐functional ionic liquid immobilized on nano‐SiO2 nano‐SiO2@CoCl3‐C12IL as an efficient cooperative catalyst for C–H activation by direct acylation of aryl halides with aldehydes

Nano‐silica supported ionic liquids composed of alkyl carbon chain and transition metal chlorides anions have been prepared and successfully applied as a heterogeneous catalyst in the direct aldehyde C‐H activation. Catalytic results indicated that nano‐SiO₂ supported ionic liquid consisting C12 alkyl carbon chain and CoCl₃ anion nano‐SiO₂@CoCl₃‐C12IL showed excellent catalytic properties with good to excellent yields towards the desired aryl ketones. The excellent recyclability of the supported catalyst, mild reaction conditions, low catalyst loading, and operational simplicity are the important features of this methodology.