N-取代苯甲酰基-N'-取代芳基硫脲的合成、晶体结构及生物活性

为了寻找新的高活性农药, 利用工业易得的三氟羧草醚及其中间体为起始原料, 设计合成了9个未见报道的N-取代苯甲酰基-N'-取代芳基硫脲化合物, 结构经IR, ¹H NMR, 元素分析确认. X射线衍射测定了化合物4b的晶体结构, 结果表明: 其分子属于三斜晶系, 空间群P-1, a＝0.51588(19) nm, b＝1.0766(4) nm, c＝2.0596(8) nm, α＝81.113(6)°, β＝89.702(6)°, γ＝78.131(6)°, V＝1.1056(7) nm³, D_c＝1.445 Mg/m³, Z＝2, F(000)＝492, μ＝0.319 mm^－1. 初步生物活性测试结果表明, 部分化合物具有较好的除草活性.     

聚苯乙烯-g-聚乙二醇的制备及其表面改性作用

通过沉淀聚合方法,利用自由基共聚制备了苯乙烯-顺丁烯二酸酐共聚物(SMA),利用SOCl2的酰氯反应,在SMA大分子链上接枝聚乙二醇侧链,制备了聚苯乙烯-g-聚乙二醇(PEG-g-PS)的大分子表面改性剂。利用大分子表面改性剂在聚苯乙烯基体中具有选择性迁移扩散的特性,实现了对聚苯乙烯薄膜表面极性的改善作用。采用衰减全反射傅立叶变换红外光谱仪和表面静态接触角法检测了聚苯乙烯的表面极性。结果发现,PEG-g-PS上的聚醚链段可以有效的富集在聚合物表面,明显改善PS的表面极性和亲水性,表面极性可提高3倍,达到11.6mN/m。同时,大分子表面改性剂和聚苯乙烯基体间有一定的相容性,有效地克服了小分子表面改性剂容易流失,改性寿命较短的重要缺陷,使表面改性的持久性充分增加,实现对聚合物表面改性效果终生化的目的。而且大分子表面改性剂在极性溶剂的诱导作用下,可以实现进一步的迁移扩散,充分提高了聚苯乙烯的表面极性。     

微波辅助提取-GC/MS联用分析苍耳子中油脂成分的研究

采用微波辅助提取-GC/MS联用分析苍耳子中的油脂成分.以V(环已烷):V(丙酮)=1:1为提取溶剂,优化了微波辅助提取的条件.以正二十烷为内标,鉴定出了13种油脂成分,各组分相对保留时间的相对标准偏差(RSD)小于0.15%,相对峰面积的RSD＜3.0%.对不同批次以及不同产地的苍耳子样品进行了对比研究.该方法可用于苍耳子的鉴定和质量控制.     

Simulating water with the self-consistent-charge density functional tight binding method: from molecular clusters to the liquid state

The recently developed self-consistent-charge density functional tight binding (SCCDFTB) method provides an accurate and inexpensive quantum mechanical solution to many molecular systems of interests. To examine the performance of the SCCDFTB method on (liquid) water, the most fundamental yet indispensable molecule in biological systems, we report here the simulation results of water in sizes ranging from molecular clusters to the liquid state. The latter simulation was achieved through the use of the linear scaling divide-and-conquer approach. The results of liquid water simulation indicate that the SCCDFTB method can describe the structural and energetics of liquid water in qualitative agreement with experiments, and the results for water clusters suggest potential future improvements of the SCCDFTB method.     

Ambient temperature synthesis of high enantiopurity N-protected peptidyl ketones by peptidyl thiol ester-boronic acid cross-coupling

alpha-Amino acid thiol esters derived from N-protected mono-, di-, and tripeptides couple with aryl, pi-electron-rich heteroaryl, or alkenyl boronic acids in the presence of stoichiometric Cu(I) thiophene-2-carboxylate and catalytic Pd(2)(dba)(3)/triethylphosphite to generate the corresponding N-protected peptidyl ketones in good-to-excellent yields and in high enantiopurity. Triethylphosphite plays a key role as a supporting ligand by mitigating an undesired palladium-catalyzed decarbonylation-beta-elimination of the alpha-amino thiol esters. The peptidyl ketone synthesis proceeds at room temperature under nonbasic conditions and demonstrates a high tolerance to functionality.     

Ca2+- and ba2+-ligand coordinated unilamellar, multilamellar, and oligovesicular vesicles

Ca(2+)- and Ba(2+)-coordinated vesicle phases were prepared in mixed aqueous solutions of tetradecyldimethylamine oxide (C(14)DMAO) and calcium oleate (Ca(OA)(2)) or barium oleate (Ba(OA)(2)). At the right mixing ratios, metal-ligand coordination between Ca(OA)(2) or Ba(OA)(2) and C(14)DMAO results in the formation of molecular bilayers due to the reduction in area per head group. Ca(2+) and Ba(2+) tightly associate to the head groups of surfactants and in this system the bilayer membranes are not shielded by excess salts. The structures of the birefringent samples of the Ca(OA)(2)/C(14)DMAO/H(2)O and Ba(OA)(2)/C(14)DMAO/H(2)O systems were determined by freeze-fracture transmission electron microscopy (FF-TEM), small-angle X-ray scattering (SAXS), and rheological measurements to consist of unilamellar, multilamellar, and oligovesicular vesicles. The coordination between C(14)DMAO and Ba(OA)(2) or Ca(OA)(2) plays an important role in the formation of the vesicles, which was easily confirmed by studying the phase behavior of the KOA/C(14)DMAO/H(2)O system in which only the L(1) phase forms, due to the absence of coordination between KOA and C(14)DMAO. A mechanism is proposed that accounts for the formation of these new metal-ligand coordinated vesicles.     

Structural and dynamic properties of concentrated alkali halide solutions: a molecular dynamics simulation study

The physicochemical properties of alkali halide solutions have long been attributed to the collective interactions between ions and water molecules in the solution, yet the structure of water in these systems and its effect on the equilibrium and dynamic properties of these systems are not clearly understood. Here, we present a systematic view of water structure in concentrated alkali halide solutions using molecular dynamics simulations. The results of the simulations show that the size of univalent ions in the solution has a significant effect on the dynamics of ions and other transport properties such as the viscosity that are correlated with the structural properties of water in aqueous ionic solution. Small cations (e.g., Li+) form electrostatically stabilized hydrophilic hydration shells that are different from the hydration shells of large ions (e.g., Cs+) which behave more like neutral hydrophobic particles, encapsulated by hydrogen-bonded hydration cages. The properties of solutions with different types of ion solvation change in different ways as the ion concentration increases. Examples of this are the diffusion coefficients of the ions and the viscosities of solutions. In this paper we use molecular dynamics (MD) simulations to study the changes in the equilibrium and transport properties of LiCl, RbCl, and CsI solutions at concentrations from 0.22 to 3.97 M.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

功能碳黑修饰的丝网印刷碳糊电极葡萄糖生物传感器的特性与机理

从碳黑表面引发苯乙烯磺酸钠的原子转移自由基聚合制备了聚(苯乙烯磺酸钠)改性碳黑(CB-g-PSS),并分别以掺杂和沉积两种不同方式修饰电极的生物敏感膜,再在生物敏感膜上吸附固定葡萄糖氧化酶,制作了两种葡萄糖氧化酶传感器,得到了不同的效果.实验结果表明,将CB-g-PSS与成膜材料掺杂制作的生物传感器与无修饰传感器相比,响应灵敏度下降了1/3;将CB-g-PSS沉积修饰丝网印刷碳糊电极制作的传感器与无修饰传感器相比,响应灵敏度提高了2倍,且对1.1～33.3 mmoL/L的葡萄糖待测样本,RSD均＜7%,稳定性良好,有较高的应用价值.通过实验分析了CB-g-PSS以不同方式修饰电极的工作机理,结果表明,选择正确的修饰方式,能够发挥CB-g-PSS的导电效应及纳米效应,使其有利于酶的固定,提高响应灵敏度并改善酶促反应动力学特性.     

裂解酞菁铁和乙烯制备取向碳纳米管阵列

采用热化学气相沉积(TCVD)法裂解酞菁铁(FePc)和乙烯(C2H4)制备出高210 μm的取向碳纳米管阵列(ACNTA). 用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱和X射线光电子能谱(XPS)对制备的样品进行了表征, 系统研究了反应温度、反应时间、C2H4流量对ACNTA生长的影响. 结果表明, 样品具有高取向性且纯度高. 800 ℃是裂解FePc和C2H4制备ACNTA的最优温度, 催化剂的活性可以保持较长时间(60 min), 通入C2H4促进了ACNTA的快速生长, 最适合流量为50 cm3/min.