Four New Nortriterpenoids from Phlomis umbrosa

Four new 28‐noroleanane‐derived spirocyclic triterpenoids, compounds 1 – 4 , were isolated from the rhizomes of Phlomis umbrosa. Their structures were elucidated on the basis of 1D‐ and 2D‐NMR analyses, in combination with high‐resolution MS experiments.     

四硫富瓦烯衍生物/硬脂酸LB膜的导电性研究

报导了14种四硫富瓦烯衍生物／硬脂酸LB膜的导电性，并解释了硬脂酸量和碘蒸气掺杂对LB膜导电性的影响．     

茶叶中咖啡因的纸基质室温燐光法体内药代动力学研究

以快速定量滤纸为基质 ,用KI NaAc为重原子微扰剂建立了测定痕量咖啡因的滤纸基质室温光(PS RTP)分析法。并用于茶叶中咖啡因的测定及其在人体内的药代动力学研究。实验表明 :PS RTP法用于茶叶中咖啡因的测定准确、灵敏。受试者饮茶后 1～ 2h尿样中咖啡因排泄达高峰 ,2 4h后基本排泄完毕。咖啡因的尿排泄量占总摄取量的 64 .2 5 %。     

Tuning the Hybridization of Local Exciton and Charge-Transfer States in Highly Efficient Organic Photovoltaic Cells

Decreasing the energy loss is one of the most feasible ways to improve the efficiencies of organic photovoltaic (OPV) cells. Recent studies have suggested that non-radiative energy loss ( ) is the dominant factor that hinders further improvements in state-of-the-art OPV cells. However, there is no rational molecular design strategy for OPV materials with suppressed . Herein, taking molecular surface electrostatic potential (ESP) as a quantitative parameter, we establish a general relationship between chemical structure and intermolecular interactions. The results reveal that increasing the ESP difference between donor and acceptor will enhance the intermolecular interaction. In the OPV cells, the enhanced intermolecular interaction will increase the charge-transfer (CT) state ratio in its hybridization with the local exciton state to facilitate charge generation, but simultaneously result in a larger . These results suggest that finely tuning the ESP of OPV materials is a feasible method to further improve the efficiencies of OPV cells.     

Enantioseparation of Amino Acid Derivatives with a Cellulose-Based Chiral Stationary Phase

Five structurally related amino acid derivatives were enantioseparated by HPLC with a commercially available chiral stationary phase, Chiralcel OD-H. The chromatographic experiments were performed in the normal phase mode. n-Hexane/polar alcohol was used as mobile phase. Excellent baseline enantioseparations could be obtained for all these solutes. The effects of the concentration of polar alcohol and the column temperature on the retentions and enantioseparations were studied in detail. From the van't Hoff plots the corresponding apparent thermodynamic parameters were derived. Mechanism aspects of chiral recognition were discussed based on the relationship between the thermodynamic parameters and the structures of the solutes. It was found that the substituent of the phenyl group on the residual group of the amino acid derivatives was close relevant to thermodynamic origin of enantioseparation. Much better enthalpy–entropy compensation effect was obtained by plotting the differential, rather than the original, thermodynamic parameters.     

TEOS-MTES基SiO2溶胶微结构的SAXS研究

正硅酸乙酯(TEOS)为前驱体,在碱性条件下制备含有无定形SiO2颗粒的溶胶,以甲基三乙氧基硅烷(MTES)在酸性条件下获得聚甲基硅氧链,二者混合后应用同步辐射X射线进行混合溶胶的SAXS散射强度测定,计算了溶胶的平均回转半径、平均粒径、两相界面层厚度、散射体体积分数、两相间比表面积等参数,辅以光子相关光谱法(PCS)和透射电子显微镜(TEM)观测溶胶粒度,证实SiO2颗粒被MTES混合物连接成族团.实验发现所测混合溶胶样品均表现出对Porod定理的负偏离,说明溶胶中颗粒与溶剂之间存在很明显的两相间界面层.     

Enantioseparation of amino acid derivatives on an immobilized network polymer derived from L-tartaric acid

Seven structurally related amino acid derivatives were successfully enantioseparated by HPLC with a commercially available column containing a chiral immobilized network polymer derived from L-tartaric acid. The experiments were carried out under normal-phase conditions. All the solutes could be baseline separated using n-hexane/2-propanol (95/5) as eluent at a flow rate of 1 ml/min at 25 degrees C, with reasonable retention time (<12 min). The effects of the polar alcohol modifier (type and content) in the mobile phase and the column temperature on the enantioseparation were studied. Apparent thermodynamic parameters were also calculated from the plots of ln alpha or ln k' versus 1/T. Some mechanistic aspects of chiral recognition were discussed with respect to the structures of the solutes. It was found that the enantioseparations are all enthalpy driven, and the N-acyl groups of the solutes have significant influence on the chiral recognition.     

Structure and properties of (1−x)(0.6Pb(Zn1/3Nb2/3)O3-0.4Pb (Mg1/3Nb2/3)O3)-xPbTiO3 thin films with perovskite phase promoted by polyethylene glycol

The preferential formation of a pyrochlore structure is a knotty problem in the preparation of Pb(Zn_1/3Nb_2/3)O₃ (PZN)-based thin film materials and its presence is significantly detrimental to the dielectric and piezoelectric properties. In this study, 40 mol% of PZN was replaced with Pb(Mg_1/3Nb_2/3)O₃ (PMN) for obtaining a perovskite composition around a morphotropic phase boundary (MPB), (1−x)(0.6PZN-0.4PMN)-xPT ((1−x)PZMN-xPT, PT: PbTiO₃) where x = 0.23. The thin films with this composition were prepared with a polyethylene glycol (PEG) modi-fied sol-gel method on LaAlO₃ substrates. The microstructural evolution of the films on heat treatment was examined with X-ray diffraction. With the aid of PEG, the formation of the pyrochlore phase was suppressed and the perovskite phase formed directly from the amorphous gel film. The multilayer films with a thickness around 0.25 μm showed a single perovskite phase without any detectable pyrochlore structure. Microscopic images showed uniform grain size of a few tens of nanometers. The role of the polymer dramatically promoting the perovskite phase was investigated with the aid of X-ray photoelectron spectroscopy and thermal analysis. The dielectric constant of the obtained film was 4160 at 1 kHz. The film demonstrated typical ferroelectric hysteresis loops and exhibited excellent piezoelectric performance.     

Flow-injection analysis based on a membrane separation module and a bulk acoustic wave impedance sensor – determination of the volatile acidity of fermentation products

A novel flow-injection analysis (FIA) system has been developed for the rapid determination of the volatile acidity of some fermentation products like vinegars and juices. The proposed method is based on the diffusion of volatile acids, mainly acetic acid, across a PTFE gas-permeable membrane from an acid stream into an alkaline stream, and the acids trapped in the acceptor solution are determined online by a bulk acoustic wave impedance sensor based on changes in the conductivity of the solution. It exhibited a linear frequency response up to 10 mmol · L^–1 acetic acid with a detection limit of 50 μmol · L^–1, and the precision was better than 1% (RSD) at a through-put of 72 h^–1. The effects of operating voltage for the detector, cell constant of the electrode, composition of acceptor stream, flow rates and temperature on the FIA performance were also investigated. Received: 2 June 1997 / Revised: 7 July 1997 / Accepted: 12 July 1997     

Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.