Waveguide invariance structure for low frequency monostatic bottom reverberation mitigation in shallow water

The stable range-frequency interference structure(waveguide invariance) of the low frequency monostatic bottom reverberation in shallow water is derived theoretically in this paper by using ray-normal mode coherent reverberation model and separable bottom scattering model.And combined the concept of spectral subtraction,a reverberation forecasting and mitigating method based on the waveguide invariance is presented.According to the waveguide invariance,the reverberation intensity for a detecting range can be estimated from the reverberation returns scattered from some other range cells nearby the detecting range with frequency shift.Then the reverberation component for the detecting range in the echo can be canceled mostly by using the estimated reverberation intensity,so as to enhance the echo-to-reverberation ratio and improve the detection capability of the active sonar.Simulations in typical horizontal layered shallow water environment show the stability of waveguide invariance structure in the low frequency monostatic bottom reverberation and the efficiency of the reverberation forecasting and mitigating method based on the waveguide invariance.     

随机DEA期望值模型的一些性质

为判别决策单元在随机DEA期望值模型下的随机有效性,首次提出了随机期望无效、随机期望弱有效、随机期望有效以及随机期望超有效的概念．并给出了三个命题用于判别不同显著性水平下随机期望效率与期望效率的关系．在此基础上,得到了两个重要的性质：（1）当期望效率保持不变时,随机期望效率为显著性水平的增函数;（2）当显著性水平保持不变时,随机期望效率为期望效率的增函数．最后,利用随机模拟和一个算例对上述结论进行了验证．     

四元合金GaxIn1-xAs1-ySby的禁带宽度与组分关系的计

GalnAsSb是直接带隙、窄禁带的半导体材料,其波长范围为0. 87-12μm,粗盖了2-4 m, 3-5μm和8-12μm三个重要的红外应用波段,可制作室温下工作的红外光电器件,在光纤通信、环境监测、资源勘探、空间技术及军事等方面有广泛的应用前景.     

注入Si中的稀土离子Er3+的光学特性

用离子注入方法,将稀土离子Er3+注入到n-Si单晶中,通过对其低温(77K)光致发光光谱的测量,研究其光学特性.结果表明,注入剂量控制在1×1012cm-2～1×1015cm-2范围,退火温度控制在900℃～1100℃时,样品的主要发光峰值位于1.54μm左右.研究了样品的光致发光光谱随注入剂量、退火温度的变化关系,给出峰值在1.54μm附近的未分辨开的谱线的半宽为16.4meV.     

Traveling－Wave Electrooptical Modulator on Polymeric Film with Reversal Poling Structure

Ｔｒａｖｅｌｉｎｇ－ＷａｖｅＥｌｅｃｔｒｏｏｐｔｉｃａｌＭｏｄｕｌａｔｏｒｏｎＰｏｌｙｍｅｒｉｃＦｉｌｍｗｉｔｈＲｅｖｅｒｓａｌＰｏｌｉｎｇＳｔｒｕｃｔｕｒｅ￥ＺＨＯＵＹｉ；ＣＨＥＮＹｉｘｉｎ（ＤｅｐａｒｔｍｅｎｔｏｆＡｐｐｌｉｅｄＰｈｙｓｉｃｓ，Ｓ...     

耐盐吸附树脂对增塑剂DIBP生产废水预处理的研究

采用耐盐吸附树脂NDA-66预处理增塑剂DIBP生产废水,研究了不同吸附剂对DIBP生产废水中主要污染物邻苯二甲酸的吸附脱附效果。实验结果表明,5种吸附剂中,NDA-66树脂对邻苯二甲酸处理效果最好,且符合Freundlich方程和Langmuir方程;动态吸附脱附过程中,单柱吸附量为7BV,最佳流速为1.5BV/h,最佳脱附剂为1BV 8%Na OH+2BV蒸馏水,温度为328K,脱附率能达到99%以上;放大实验过程中,NDA-66耐盐吸附树脂对增塑剂DIBP生产废水中邻苯二甲酸吸附稳定性较好。     

Glucose Biosensor Using Glucose Oxidase and Electrospun Mn2O3‐Ag Nanofibers

The highly porous Mn₂O₃‐Ag nanofibers were fabricated by a facile two‐step procedure (electrospinning and calcination). The structure and composition of the Mn₂O₃‐Ag nanofibers were characterized by SEM, TEM, XRD, EDX and SAED. The as‐prepared Mn₂O₃‐Ag nanofibers were then employed as the immobilization matrix for glucose oxidase (GOD) to construct an amperometric glucose biosensor. The biosensor shows fast response to glucose, high sensitivity (40.60 µA mM^?1 cm^?2), low detection limit (1.73 µM at S/N=3), low K_m,app value and excellent selectivity. These results indicate that the novel Mn₂O₃‐Ag nanfibers‐GOD composite has great potential application in oxygen‐reduction based glucose biosensing.