带宽调制型单光纤光栅温变无补偿位移传感

报道了利用反射谱带宽调制和光强差分探测技术实现单一光纤光栅温变无补偿位移精确测量的新方法。设计了一种结构新颖的曲臂梁位移传感装置,结合光波导理论与材料力学原理分析了光纤光栅在高斯应变作用下光栅反射谱侧向梯度展宽的成因,理论推导了特殊结构梁在外力作用下光栅反射谱带宽/反射光强与压力之间的响应关系。光栅反射谱侧向梯度展宽的同时反射光强线性增加,利用光强差分检测方法消除光源出光抖动的影响,提高了位移测量精度。基于带宽调制的光纤光栅位移传感方法免受温度变化的影响,在-10℃~80℃的温度变化范围内,测量误差小于1.2%,实现了单光纤光栅温变无补偿位移测量。     

The aberration theory of a combined electron focusing–deflection system with a rotating deflection field following the rotation of the electrons

A new type of combined magnetic focusing–electrostatic deflection systems whose orientation of deflection field is rotated synchronously with the beam electrons is proposed. This rotation deflection field can be formed by twistification of tube wall electrode (TWE) deflectors. Formulae are derived for the first-order optical properties, third-order geometrical aberrations and first-order chromatic aberrations of this system. A program was written in FORTRAN for numerical computation. An example is given; the computation results show that compared to the conventional systems, the proposed new system has lower deflection aberration coefficients.     

The design and artificial realization of a controller of pulse coupling feedback

In this paper a controller of pulse coupling feedback (PCF) is designed to control chaotic systems. Control principles and the technique to select the feedback coefficients are introduced. This controller is theoretically studied with a three dimensional (3D) chaotic system. The artificial simulation results show that the chaotic system can be stabilized to different periodic orbits by using the PCF method, and the number of the periodic orbits are 2ⁿ× 3^mp (n and m are integers). Therefore, this control method is effective and practical.     

Effects of unsymmetrical geometric confinements on depletion interactions in colloidal suspensions

The depletion interactions between two large-spheres immersed in a fluid of small spheres under unsymmetrical geometrical confinement are studied through the acceptance ratio method. The numerical results show that no matter whether the volume fraction is large or small, both the depletion potential and depletion force are affected by the presence of the two plates; the closer the two large spheres are to the plate, the larger the effects of the unsymmetrical confinements.     

X-ray observations of tungsten wire array Z-pinch implosions on QiangGuang-1 facility

Z-pinch experiments with two arrays consisting, respectively, of 32 4-μm- and 6-μm-diameter tungsten wires have been carried out on QiangGuang-1 facility with a current rising up to 1.5MA in 80ns. At early time of implosion, x-ray framing images show that the initial emission comes from the central part of arrays, and double clear emission rings, drifting to the anode and the cathode at 5×10⁶cm/s and 2.4×10⁷cm/s respectively, are often produced near the electrodes. Later, in a 4-μm-diameter tungsten wire array, filamentation caused by ohmic heating is prominent, and more than ten filaments have been observed. A radial inward shift of arrays starts at about 30\,ns earlier than the occurrence of the x-ray peak power for both kinds of arrays, and the shrinkage rate of emission region is as high as 1.7×10⁷cm/s in a 4-μm-diameter tungsten wire array, which is two times higher than that in a 6-μm one. Emission from precursor plasmas is observed in implosion of 6-μm-diameter tungsten wire arrays, but not in implosion of a 4-μm-diameter tungsten wire array. Whereas, in a 4-μm-diameter tungsten wire array, the soft x-ray emission shows the growth of m=1 instability in the plasma column, which is caused by current. The reasons for the discrepancy between implosions of 4-μm- and 6-μm-diameter tungsten wire arrays are explained.     

普物实验教学应科学引导学生进行知能整合

以“电池电动势和内阻的测定”为例,简述了在普物实验教学中,科学引导学生进行知能整合的过程,使科学知识与相关知识的应用实现了最佳的整合,提高了学生设计实验、实验测量、科学评定实验过程及测量结果的能力。     

基于机器视觉的移动工件抓取和装配的研究

针对工业生产线上某产品上下盖自动装配的问题,运用运动控制理论与机器视觉相结合,搭建了一套模拟工业生产线产品装配系统。首先利用工业相机对进入视场的工件进行单帧图像采集,获取图像数据;然后利用OpenCV对数字图像进行处理,包括中值滤波、阈值分割、孔洞填充、边缘提取来获取数字图像的特征;之后通过质心法结合矩形拟合计算出工件的质心坐标和偏转角度;最后引导六轴机械臂抓取产品的时候能根据图像处理结果进行纠偏和补偿。该系统采用平面棋盘格标定板对工业相机进行了标定,并且在线进行了验证,实验结果表明,工件抓取和装配成功率为100%,满足工业现场的装配精度要求。     

The Morphology and Mechanical Properties of Isotactic Polypropylene Injection-Molded Samples with the Presence of β-Nucleation Agent and Periodical Shear Field

The pressure vibration injection molding (PVIM) method was used to prepare β-nucleated isotactic polypropylene samples (PVIM β-iPP samples); a relatively low, periodical shear was imposed on the polymer melt in the mold at the filling and packing stages. The crystal structures and crystal orientation of the PVIM β-iPP samples were investigated by polarizing light microscopy (PLM), scanning electron microscopy (SEM), and synchrotron two-dimensional wide-angle X-ray diffraction (2D-WAXD). The PLM observations indicated that a cylindrite layer, rather than the transition layer, was found in PVIM β-iPP samples, which is different from the conventional injection-molded (CIM) samples. In addition, the thickness of the oriented layer of the PVIM samples was obviously greater than that of the CIM samples. The SEM observations demonstrated that a large amount of shish-kebab structures appeared in the shear layer of the PVIM β-iPP samples; at the same time, numerous β-spherulites were formed in the core layer. The 2D-WAXD data indicated that orientation homogeneity, to some degree, could be obtained by the periodical shear during PVIM. As a result, the above-mentioned morphology of the PVIM β-iPP samples leads to potentially useful prominent reinforcement and toughening of the material.