Two-step dissociation of a polaron in conjugated polymers

We have studied the electric-field-driven motion of a polaron by solving the time-dependent Schr\"{o}dinger equation nonadiabatically and the lattice equation of motion simultaneously. It is found that the polaron may experience two sequent transitions under high fields; one is the transition from the subsonic to the supersonic state, and the other from the supersonic to dissociated state. The acoustic mode is decoupled from the charge when the polaron moves at a speed faster than the sound speed, and then the optical mode is decoupled at the second transition to make the polaron dissociate completely.     

A novel super-FEC code based on concatenated code for high-speed long-haul optical communication systems

The structures of the novel super forward error correction (Super-FEC) code type based on the concatenated code for high-speed long-haul optical communication systems are studied in this paper. The Reed-Solomon (RS) (255, 239) + Bose-Chaudhuri-Hocguenghem (BCH) (1023, 963) concatenated code is presented after the characteristics of the concatenated code and the two Super-FEC code type presented in ITU-T G.975.1 have theoretically been analyzed, the simulation result shows that this novel code type, compared with the RS (255, 239) + convolutional-self-orthogonal-code (CSOC) (k₀/n₀ = 6/7, J = 8) code in ITU-T G.975.1, has a lower redundancy and better error-correction capabilities, and its net coding gain (NCG) at the third iteration is 0.57 dB more than that of RS (255, 239) + CSOC (k₀/n₀ = 6/7, J = 8) code in ITU-T G.975.1 at the third iteration for the bit error rate (BER) of 10⁻¹². Therefore, the novel code type can better be used in long-haul, larger capacity and higher bit-rate optical communication systems. Furthermore, the design and implementation of the novel concatenated code type are also discussed.     

Design and Synthesis of a Ruthenium(II) Complex-Based Luminescent Probe for Highly Selective and Sensitive Luminescence Detection of Nitric Oxide

Nitric oxide (NO) is one of the most important intercellular signaling molecules, and plays important roles in various biological systems. In this work, a unique Ru^II complex, tris[(5-(4-methylamino-3-aminobenzylamino)-1,10-phenanthroline)] ruthenium(II) hexafluorophosphate [Ru(MAA-phen)₃][PF₆]₂, has been designed and synthesized as a luminescent probe for the detection of NO in aqueous media. The complex itself is almost non-luminescent, but can specifically react with NO under the aerobic conditions to afford its highly luminescent triazole derivative in aqueous media, [Ru(MTA-phen)₃]²⁺ (MTA-phen: methyl-trazolebenzylamino-1,10-phenanthroline), accompanied by a 302-fold increase in luminescence intensity at 598 nm with a 130 nm Stokes shift. The luminescence response of [Ru(MAA-phen)₃]²⁺ to NO is rapid, highly specific without interferences of other reactive oxygen/nitrogen species, and highly stable against the pH changes in the range of pH 4.5–9.5. These features enable [Ru(MAA-phen)₃]²⁺ to be used as a probe for the highly selective and sensitive luminescence detection of NO in weakly acidic, neutral, and weakly basic media.     

Thermal noise limit in measuring the gravitational constant G using the angular acceleration method and the dynamic deflection method

A general comparison is made between two methods of measuring the gravitational constant G. The angular acceleration method can avoid the anelasticity effect since the torsion fiber is not twisted. The dynamic deflection method is similar in principle but it does not use feedback, therefore a major noise introduced by the feedback control system in the angular acceleration method can be avoided. Both methods have their advantages and can be performed with the same device. Based on different expressions of G, we have expressed the signal-to-noise ratio and calculated the thermal noise limit for both methods. In order to get a lower thermal noise limit, the dynamic deflection method should avoid resonance.     

大口径KDP晶体角度相位匹配离线测量精度研究

为满足惯性约束聚变(ICF)实验对激光驱动器高效三倍频能力的要求, 对离线测量晶体角度相位匹配方案进行了优化。采取的主要优化措施是：提高晶体准直技术能力;降低模拟小口径激光输出变化对测量不稳定性的影响。通过理论分析和对实际测量结果的系统分析,得到了晶体离线测量的不确定度：其中二倍频相位匹配角测量扩展不确定度为15.94 rad,三倍频相位匹配角测量扩展不确定度为27.8 rad,达到了较高的晶体离线测量精度要求。     

Rapid detection of doxycycline content in duck meat by using silver nanoparticles and alkylphenols polyoxyethylene enhanced fluorescence of europium complex

Doxycycline can coordinate with europium (III) to form europium (III)-doxycycline complex, which can emit the fluorescence characteristic peak of europium (III) at 617 nm in alkaline solution, and the experiment proved that the fluorescence intensity could be further enhanced in the presence of silver nanoparticles and surfactant alkylphenols polyoxyethylene. So this method was applied to detect doxycycline content in duck meat in this research. First, 390 and 617 nm were selected as the optimum excitation wavelength and optimum emission wavelength by three-dimensional fluorescence spectrometry, respectively. Second, the experimental conditions were optimized through single factor experiment. Lastly, the samples of doxycycline concentration range of 0.05–12 mg/L were analyzed under the optimum experimental conditions. A good linear relationship between the doxycycline concentration and the fluorescence intensity was obtained, and the determination coefficient and the root mean squared error of prediction were 0.9982 and 0.4363 mg/L, respectively. This research showed that it was feasible to achieve the rapid detection of doxycycline content in duck meat by using silver nanoparticles and alkylphenols polyoxyethylene enhanced the fluorescence of europium complex.     

卡尔曼滤波紫外光度法同时测定酱油、食醋中的山梨酸和苯甲酸

在酸性条件下，采用乙酸乙酯萃取、Na2HPO4溶液反萃取分离酱汪、食醋中的山梨酸、苯甲酸，卡尔曼滤波法计算结果，并与比值导数波谱法进行比较。结果表明，卡尔曼滤波法较地数波谱法有较高准确度和精密度，并能监测干扰物质存在与否。用于实际样品分析有更高的可靠性。     

Additive-free controllable fabrication of bismuth vanadates and their photocatalytic activity toward dye degradation

Bismuth vanadates (BiVO₄) with various crystal structures (tetragonal scheelite, monoclinic scheelite, and tetragonal zircon) and morphologies (sphere-, nanosheet-, dendrite-, and flower-like) were controllably fabricated by using a mild additive-free hydrothermal treatment process under the different preparation conditions. The crystal structures, morphologies, and photophysical properties of the products were well-characterized. Subsequently, their UV- as well as visible-light photocatalytic performance was evaluated via dyes rhodamine B (RB) and methylene blue (MB) degradation. Special attention was paid to evaluate the correlation of the reactivity with crystal structure, morphology, and electronic structure of as-prepared BiVO₄ samples.     

VCSEL with reticular electrode and larger emitting aperture and its optoelectronic characteristics

The enlargement of the emitting aperture is usually one of the important methods of increasing vertical- cavity surface-emitting laser （VCSEL） optical output power. However, in a VCSEL with a larger aperture, the inhomogeneity in the injected current often causes inhomogeneous or even no emission. To solve this problem and to increase VCSEL output power, as well as to improve its thermal characteristics, we develop a new type of injected VCSEL with a larger aperture and a reticular electrode, where the conventional circular injection electrode of the P side is turned into a reticular one, and the heat sink is on the N side. The tests of the new VCSEL show an improvement in homogeneity in not only the injected current but also the emission intensity. The optical output power is also considerably increased, and the device optoelectronic performance is improved.     

基于过模波导的高功率微波准相干功率合成器

研究了一种用于功率合成的GW级高功率微波功率合成器。该合成器工作在X波段,输入微波由2路工作频率不同的X波段的微波源产生。为了满足输出功率和功率容量的要求,用于功率合成的微波源工作段波导的过模因子为12.7,这给功率合成器的设计带来了一定的困难。着重讨论了如何利用过模波导设计X波段高功率合成器,研究了如何抑制过模波导的高次模式并提高其功率容量和传输效率。设计的功率合成器单路传输效率达到99.0%以上,允许的最大输出功率达到5.6 GW以上,还可以按照需求适当增大高度,以进一步提高其功率容量而不影响传输效率。