An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

一种脉冲强电流条件下导线电阻测量方法

在超强激光辐照电容线圈靶产生强磁场实验中,在约50 ps时,线圈电流达到20 kA以上。通过该实验结果与磁场产生理论模型对比,可得出该导线电阻值比常温直流电阻高出3个量级。对导线材料电阻率与趋肤效应的分析结果表明,该电阻值在量级上是合理的。获得超快脉冲强电流条件下的导线电阻值,有助于更深入理解线圈靶产生强磁场过程。     

Time-dependent Ginzburg–Landau equations for multi-gap superconductors

We numerically solve the time-dependent Ginzburg–Landau equations for two-gap superconductors using the finite-element technique. The real-time simulation shows that at low magnetic field, the vortices in small-size samples tend to form clusters or other disorder structures. When the sample size is large, stripes appear in the pattern. These results are in good agreement with the previous experimental observations of the intriguing anomalous vortex pattern, providing a reliable theoretical basis for the future applications of multi-gap superconductors.     

Influence of external load on friction coefficient of Fe-polytetrafluoroethylene

A coarse-grained molecular dynamics simulation model was developed in this study to investigate the friction process occurring between Fe and polytetrafluoroethylene(PTFE).We investigated the effect of an external load on the friction coefficient of Fe–PTFE using the molecular dynamics simulations and experimental methods.The simulation results show that the friction coefficient decreases with the external load increasing,which is in a good agreement with the experimental results.The high external load could result in a larger contact area between the Fe and PTFE layers,severer springback as a consequence of the deformed PTFE molecules,and faster motion of the PTFE molecules,thereby affecting the friction force and normal force during friction and consequently varying the friction coefficient.     

膜厚监控系统的光谱宽度对窄带滤光片性能的影响

讨论了膜厚监控系统的光谱宽度对波分复用窄带滤光片特性的影响,分析了监控过程中所出现的信号异常现象,其主要原因是控制光光谱宽度以及控制波长与滤光片中心波长不一致,所以控制光光谱分辨率必须小于单个法布里-珀罗滤光片最后2层膜折转点波长宽度的一半,即对100GHz的滤光片,监控系统的光谱宽度必须小于0．2nm。一旦产生中心波长偏离,就必定产生厚度控制误差。讨论了高折射率膜和低折射率膜的信号变化规律,发现当中心波长比监控波长长时,虽然信号变化规律正确,但判读到极值时的膜厚变薄。中心波长偏离越长,厚度将越薄。而当中心波长比监控波长短时,信号将出现反转。中心波长越短,反转量越大。最后指出了监控误差对滤光片Tmax和半峰全宽的影响。     

160 km all-optical OFDM transmission system with inline chromatic dispersion compensation

An experimental demonstration of an all-optical sampling orthogonal frequency division multiplexing (AOS-OFDM) transmission system with inline chromatic dispersion (CD) compensation is carried out to test the nonlinear influence. With five subcarriers non-return-to-zero (NRZ) modulated, the total bit rate is 50 Gb/s without polarization multiplexing. The receiver end is highly simplified with direct detection using optical Fourier transform filter. After transmission in 160-km standard single-mode fiber (SSMF) link with 130-ps/nm residual CD, an optimum input optical power for the system performance is achieved.     

Synthesis and luminescence properties of a broad-band red phosphor Ca3Si2O7:Eu2+ for warm white light-emitting diodes

Single-phase broad-band red-emitting Ca₃Si₂O₇:Eu²⁺ phosphors, with photoluminescence features that qualify them as candidates for white light-emitting diodes applications, were successfully synthesized via a modified solid-state reaction method that employed H₃BO₃ as a flux. The phosphors produced have an intense broad red emission band, with a peak at 603 nm, a full width at half maximum of 110 nm, and color coordinates of (0.550, 0.438). Concentration quenching occurred at 0.01 mol Eu²⁺. The discussion of the results shows that Eu²⁺ ions should be accommodated at the Ca-sites of the lattice, dipole–dipole interactions should predominantly govern the energy transfer mechanism among them, and the critical distance between them is ～31 Å.     

NMR evidence for the charge transfer from interstitial NO or O2 to molecule C60 in solid C60

Solid C₆₀ was stored in NO and O₂ under high pressure, and the molecule NO and O₂ were found to diffuse into the octahedral interstitial sites in its fcc crystal lattice. Their ¹³C NMR MAS spectra composed of a primary resonance at 143.7 ppm, accompanied by several minor peaks shifted downfield respectively. The spectra at various temperatures from 210 to 300 K have been measured, and the chemical shifts of the minor peaks referenced to the primary resonance versus inverse temperature show straight lines. But, the lines do not go through origin, and their intercepts are equal to 0.13 ppm or its multiple. Due to a non-zero intercept at high-temperature limit, we proposed that there is a charge transfer from NO and from O₂ to C₆₀. The quantity of the charge transferred has been calculated, that is about 0.065 q_e^- (q_e^- for the elementary charge on an electron).     

Improving the Flame Retardancy of Polybenzoxazines with a Reactive Phosphorus-Containing Compound

A novel flame retardant resin was prepared by modifying benzoxazines with a reactive phosphorus-containing compound, 2-(6-Oxido-6H-dibenzo[c,e][1,2]oxa-phosphorin-6-yl) 1,4-benzenediol (ODOPB). The curing reactions of the benzoxazines containing ODOPB (ODOPB-BOZ) and a type of bifunctional benzoxazine (B-BOZ) were investigated via differential scanning calorimetry. The ODOPB-BOZ precursors exhibited lower curing temperature in comparison with the B-BOZ. Through dynamic mechanical analysis tests, it was found that the glass transition temperature and storage modulus of the cured ODOPB-BOZ were lower than those of the cured B-BOZ. Moreover, the tensile and flexural properties of the cured ODOPB-BOZ were also lower than those of the cured B-BOZ. The TGA tests proved that, owing to the presence of ODOPB, the char yield of the polybenzoxazines were remarkably raised while the decomposition rates at higher temperature were reduced. It was found that the flame retardancy of cured ODOPB-BOZ attained V-0 grade upon the UL-94 tests while that of cured B-BOZ was V-1 grade. SEM images showed that more compact char layers were formed in the cured ODOPB-BOZ after combustion, resulting in the improvement of flame retardance.