Preparation and characterization of acrylic‐based black particles of poly(methyl methacrylate‐co‐ethylene glycol dimethacrylate) by dispersion polymerization for electrophoretic displays

Ultrafine black particles, ranging in diameter from 1 to 3 μm, were prepared by dispersion polymerization in a methanol/water mixture with vinyl monomers, nonpolymerizable Sudan black B dyes, and fluorescein isothiocyanate labeled charge control additives. Both the ratio of the methanol to the water dispersion medium and the polymeric stabilizer concentration had significant effects on the particle size. The important role of the stabilizer concentration lay in the particle formation step, during which it determined the particle stability and final particle size. These could affect the extent of the aggregation of nuclei by changing the adsorption rate of the stabilizer and the viscosity of the dispersion medium, resulting in smaller particles. The fluorescent‐labeled charge control additives strongly affected the electrophoretic mobility. A small concentration of fluorescent‐labeled charge control additives increased the electrophoretic mobility. However, a further addition reduced the electrophoretic mobility of the polymer particles. The concentration dependence of the fluorescent‐labeled charge control additives on the deposition behavior in the polymer particles was successfully imaged and thereafter quantified by image analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5608–5616, 2004     

Enantioselective oxidation of sulfides with hydrogen peroxide catalyzed by vanadium complex of sterically hindered chiral Schiff bases

Sterically hindered chiral Schiff base ligands 4a-d were prepared from an aldehyde derived from BINOL. The vanadium complexes of the ligands catalyze an efficient, enantioselective H₂O₂-promoted sulfoxidation of alkyl aryl sulfides, and enantioselectivities as high as 98-99% ee are observed in the sulfoxidation of benzyl aryl sulfides.     

Dynamic synovial fibroblasts are modulated by NBCn1 as a potential target in rheumatoid arthritis

Rheumatoid arthritis (RA) is an autoimmune disease characterized by aggressive fibroblast-like synoviocytes (FLSs) and pannus formation. Various therapeutic strategies have been developed against inflammatory cytokines in RA in recent decades. Based on the migratory features of FLSs, we examined whether modulation of the migratory module attenuates RA severity. In this study, inflamed synovial fluid-stimulated FLSs exhibited enhanced migration and migratory apparatus expression, and sodium bicarbonate cotransporter n1 (NBCn1) was identified in primary cultured RA-FLSs for the first time. The NBC inhibitor S0859 attenuated the migration of FLSs induced with synovial fluid from patients with RA or with TNF-α stimulation. Inhibition of NBCs with S0859 in a collagen-induced arthritis (CIA) mouse model reduced joint swelling and destruction without blood, hepatic, or renal toxicity. Primary FLSs isolated from the CIA-induced mouse model also showed reduced migration in the presence of S0859. Our results suggest that inflammatory mediators in synovial fluid, including TNF-α, recruit NBCn1 to the plasma membrane of FLSs to provide dynamic properties and that modulation of NBCn1 could be developed into a therapeutic strategy for RA.Subject terms: Chemotaxis, Bone, Ion channel signalling, Rheumatoid arthritis, Drug development     

A novel polyol method to synthesize colloidal silver nanoparticles by ultrasonic irradiation

A polyol synthesis of silver nanoparticles in the presence of ultrasonic irradiation was compared with other configurations (at ambient temperature, 120 °C, and 120 °C with injected solutions) in the absence of ultrasonic irradiation in order to obtain systematic results for morphology and size distribution. For applying ultrasonic irradiation, rather fine and uniform spherical silver particles (21 ± 3.7 nm) were obtained in a simple (at ambient temperature without mechanical stirring) and fast (within 4 min, 3.61 × 10⁻³ mol min⁻¹) manner than other cases (at ambient temperature (for 8 h, 0.03 × 10⁻³ mol min⁻¹): 86 ± 16.8 nm, 120 °C (for 12 min, 1.16 × 10⁻³ mol min⁻¹): 64 ± 14.9 nm, and 120 °C with injected solutions (during 12 min): 35 ± 6.8 nm; all other cases contained anisotropic shaped particles). Even though the temperature of polyol reaction reached only at 80 °C (<120 °C) in the presence of ultrasonic irradiation, a uniform mixing (i.e. enhanced collision between silver particle and surrounding components) by ultrasonic irradiation might induce a better formation kinetics and morphological uniformity.     

How to obtain magnetocapacitance effects at room temperature: The case of Mn-doped BiFeO3

The magnetoelectric properties of a rhombohedrally distorted perovskite BiFe_0.7Mn_0.3O₃ are reported. An anomaly in the dielectric constant, related to enhanced thermal fluctuations around the antiferromagnetic transition, was induced near room temperature by the substitution of Mn for Fe in BiFeO₃. This substitution also brings about non-trivial magnetocapacitance effects at room temperature.     

Chemical bonding states and atomic distribution within Zn(S,O) film prepared on CIGS/Mo/glass substrates by chemical bath deposition

Zn(S,O) thin films fabricated on CIGS/Mo/glass substrates by using chemical bath deposition (CBD) in acidic and basic solutions were studied. The Zn(S,O) thin films prepared in acidic solution [A-Zn(S,O) thin film] showed better crystallinity and a more compact surface morphology with larger grains than those prepared in basic solution [B-Zn(S,O) thin film] did. From the analysis of the chemical bonding states, at the initial growth step, the concentration ratio of Zn–O/Zn–S bonds in A-Zn(S,O) thin films was found to be approximately zero, while that in B-Zn(S,O) thin films was approximately equal to 1. The elemental distribution according to depth, determined by secondary ion mass spectroscopy (SIMS), was shown to be uniform throughout both the A- and B-Zn(S,O) thin films. To reduce the number of Zn–O bonds in the B-Zn(S,O) thin films, the samples were post-annealed at up to 300 °C under vacuum, after which the concentration ratio of Zn–O/Zn–S bonds decreased by about 71% without any change in the crystallinity or surface morphology.     

Li and K NMR relaxation study of a LiKSO4 single crystal

The ⁷Li and ³⁹K NMR relaxations in a LiKSO₄ single crystal grown by the slow evaporation method were investigated by employing a pulse NMR spectrometer. From the experimental data, the quadrupole coupling constant and asymmetry parameter were determined at the temperatures of 180 and 300 K. The relaxation processes of ⁷Li and ³⁹K were studied for the LiKSO₄ crystal, and the relaxation times for the ⁷Li and ³⁹K nuclei exhibit remarkable changes near T_c2 (=190 K). The activation energies for ⁷Li and ³⁹K were determined in phases I and III. The large change in the activation energy at 190 K indicates that the Li and K ions are significantly affected during this transition. The correlation time of the ⁷Li calculated from the spin-lattice relaxation time and quadrupole parameters was larger than that of the ³⁹K calculated using the same method. The reason for this is that the Li ion undergoes molecular motion as in the LiO₄ groups.     

Multiparameter kinetic analysis of alkaline hydrolysis of a series of aryl diphenylphosphinothioates: models for P=S neurotoxins

Alkaline hydrolysis of a series of X‐substituted‐phenyl diphenylphosphinothioates ( 2a‐i ) in 80 mol%/20 mol% DMSO at 25.0 ± 0.1°C has been studied kinetically and assessed through a multiparameter approach. Substrates 2a to 2i are approximately 12 to 22 times less reactive than their P=O analogues 1a to 1i (ie, the thio effect). The Brønsted‐type plot for the reactions of 2a to 2i is linear with β_lg = ?0.43, consistent with a concerted mechanism. Hammett plots correlated with σ^o and σ^? constants also support a concerted mechanism; the Yukawa‐Tsuno plot results in an excellent linear correlation with ρ_X = 1.26 and r = 0.30, indicating that expulsion of the leaving group occurs in the rate‐determining step (RDS). The ΔH^? value increases from 10.5 to 11.7 and 13.9 kcal/mol as substituent X in the leaving group changes from 3,4‐(NO₂)₂ to 4‐NO₂ and H, in turn, while TΔS^? remains constant at ?6.0 kcal/mol. The strong dependence of ΔH^? on the electronic nature of substituent X also indicates that the leaving group departs in the RDS. The reaction mechanism and origin of the thio effect are discussed by comparison of the current kinetic results with those reported for the reactions of 1a to 1i . The results suggest that for useful OP neurotoxins the mechanism of abiotic hydrolysis is concerted (with varying degrees of asynchronicity) when the substrate bears good leaving groups.