Dual analyte flow injection fluorescence immunoassays using thiophilic gel reactors and synchronous scanning detection

Heterogeneous fluorescence immunoassays have been automated using flow injection manifolds incorporating thiophilic gel solid phase reactors to separate antibody-bound and unbound analyte molecules. Antibody elution is achieved by changes in ionic strength, thus allowing the use of pH sensitive fluorescent labels. This facilitates the development of dual analyte systems, in which two competitive immunoassays with separate labels are monitored in parallel. Detection of the fluorophores by high speed synchronous fluorescence scanning while the flow is briefly stopped utilises either one synchronous interval which detects both fluorophores, or two separate scans at different wavelength intervals, one for each fluorophore. Simultaneous analyses of serum albumin and transferrin exemplify these novel approaches. Spectroscopic interferences are very small, analyte recoveries are close to 100%, with a relative standard deviation of 5-6% and a sampling rate of 20 h-1.     

Neue Näherungsgleichung zur einheitlichen Berechnung von Wärmeübertragern

Zusammenfassung Es wird eine für alle Stromführungen einheitliche Näherungsgleichung mit drei oder vier anpaßbaren Parametern zur Berechnung des Korrekturfaktors für die mittlere logarithmische Temperaturdifferenz angegeben. Die anpaßbaren Parameter wurden für etwa 50 verschiedene Stromführungen durch Ausgleichsrechnung bestimmt. Die Genauigkeit der Gleichung ist für die Berechnung im praktisch wichtigen Bereich mehr als ausreichend.

---

New approximate equation for uniform heat exchanger design

An approximate equation with three or four empirical parameters for the uniform calculation of the LMTD-correction factor of all heat exchanger configurations is proposed. The empirical parameters have been determined for about 50 different flow configurations using least squares estimation. The accuracy of the equation is more than sufficient for practical design purposes.

---

Formelzeichen A Übertragungsfläche - a, b, c, d Parameter der Näherungsgleichung - Wärmekapazitätsstrom - F Korrekturfaktor für die logarithmische mittlere Temperaturdifferenz - k Wärmedurchgangskoeffizient - m, n Zahl der Durchgänge oder Einzelapparate - NTU Anzahl der Übertragungseinheiten (number of transfer units); NTU_i=kA/ _i - P dimensionslose Temperaturänderung - R Wärmekapazitätsstromverhältnis;R ₁=₁/₂;R ₂=₂/₁ - relativer Fehler - Mittelwert von NTU₁ und NTU₂ Indizes 1, 2 Stoffstrom 1, 2 - G Gegenstrom - s Schätzwert Herrn Prof. Dr.-Ing. E.h. K. Stephan zum 65. Geburtstag gewidmet.     

Observation of isomeric states in197Bi

The high spin states of¹¹⁹Te, populated in¹¹⁰Pd(¹³C,4n) and¹¹⁰Pd(¹²C,3n) reactions, have been studied through -ray spectroscopy. The level scheme has been established upto a spin of 55/2. Three-quasiparticle states, based on g² _7/2h_11/2 and g_7/2d_5/2h_11/2 configurations, have been identified. The 35/2 and 39/2 states are suggested to be the fully aligned states constituted by five valence h_11/2 ³, g_7/2, d_5/2 quasiparticles.     

Theoretical study of thermal diffusivity of superlattices in measurements using “mirage” technique

A complete theoretical treatment for the determination of thermal diffusivity of superlattices by the mirage technique has been performed. An effective medium approximation model of the thermal conductivity and thermal diffusivity of both sublayers is presented, which is different from the simple models with the thermal diffusivity or thermal conductivity in series or parallel. The numerical calculation of the transverse component of the probe beam deflection in the mirage effect shows that the results obtained from the complete thermal-wave theory and the medium approximation model, for the optically and thermally thick superlattices, are in good agreement with each other. However, the further study on the thermally thin superlattices shows that either the series or the parallel model of the thermal conductivity should be chosen according to whether the thermal impedance of the superlattice is larger or less than that of substrate, respectively.     

Optical spectra of an intracavity two-photon medium with sequeezed inputs

We consider an ensemble of three-level configuration atoms in an optical cavity, interacting through two-photon transitions with a cavity mode, driven by a broad-band squeezed input of finite amplitude. The atom-cavity system is coupled to reservoirs to describe the losses of the atoms and the cavity. Optical spectra in the transmitted and the reflected field are calculated and analysed in the good cavity limit, for the purely absorptive resonant case and the general case, respectively.     

TheΛ b →Λ c decay form factors

The recently measured cross-sections for diffractive dissociation of nuclei in high-energy proton nucleus (pA) collisions show a strikingA ^1/3 dependence on the target massA. Such a dependence emerges from an optical model which incorporates a simple mechanism to produce the absorption fluctuations required for inelastic diffraction. The observed momentum transfer (t) dependence of the differential cross-section, dσ/dt∝ exp(?B|t|), is described in terms of a correlation length \(R_F = \sqrt {2B} \) of the absorption fluctuations which turns out to be of the size of a nucleon. The excitation massM dependence, dσ/dM ²∝M ^?2, is explained by a bremsstrahlung mechanism.     

On two methods of determining the ellipses and ellipsoids of positioning accuracy of robot manipulators

Summary When analysing the problem of the positioning accuracy of robot manipulators it is important to know how far random deviations of the hand may be from the desired position if the joint positioning errors possess a normal distribution. Two methods of determining the ellipses and ellipsoids of probability concentration are compared. The first of them is based on the standard procedure of the probability calculus. The second approximate method consists in finding at first the polygon or polyhedron of the positioning accuracy, and then in finding the ellipse or ellipsoid with principal axes and second order moments coinciding with those of the polygon or polyhedron, respectively. Examples of application demonstrate that these two methods give very close results.

---

Zwei Methoden zur Bestimmung der Ellipsen und Ellipsoide der Positioniergenauigkeit von Handhabungsrobotern

Übersicht Bei der Untersuchung der Positioniergenauigkeit von Handhabungsrobotern ist es wichtig, die Größe zufälliger Abweichungen des Greifers von der erstrebten Position zu kennen, wenn die Lagefehler der Verbindungen eine Normalverteilung besitzen. Es werden zwei Methoden zur Bestimmung der Ellipsen bzw. Ellipsoide der Wahrscheinlichkeitsdichte verglichen. Die erste beruht auf dem Standardverfahren der Wahrscheinlichkeitsrechnung. Die zweite Näherungsmethode besteht darin, daß zunächst das Polygon bzw. Polyeder der Positioniergenauigkeit bestimmt wird und danach die Ellipse bzw. das Ellipsoid mit den Hauptachsen und Momenten zweiter Ordnung wie das Polygon oder Polyeder. Beispiele zeigen, daß beide Methoden zu sehr ähnlichen Ergebnissen führen.