Exciplex emission in the blend of two blue luminescent materials

Organic light-emitting diodes (OLEDs) based on the blend of two blue luminescent materials N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-diphenyl-4,4′-diamine (NPB) and 2-(4-biphenylyl)-5(4-tert-butyl-phenyl)-1,3,4-oxadiazole (PBD) were fabricated. The electroluminescence (EL) spectra of this device showed a new emission that is different from their intrinsic exciton emission. Compared with the photoluminescence (PL) spectra of single layer NPB and PBD, respectively, there was an apparent red shift in that of their blend. Thus the exciplex formation in the blend can be concluded due to the similar emission in both PL and EL spectra. The exciplex formation process and the effect of applied voltage were analyzed by Gaussian fitting.     

Effect of surface modification by thermally oxidization and HF etching on UV photoluminescence emission of porous silicon

Photoluminescence of porous silicon (PS) is instable due perhaps to the nanostructure modification in air. The controllable structure modification processes on the as-prepared PS were conducted by thermal oxidization and/or HF etching. The PL spectra taken from thermally oxidized PS showed a stable photoluminescence emission of 355 nm. The photoluminescence emission taken from both of PS and oxidized porous silicon (OPS) samples etched with HF were instable, which can be reversibly recovered by the HF etching procedure. The mechanism of UV photoluminescence is discussed and attributed to the transformation of luminescence centers from oxygen deficient defects to the oxygen excess defects in the thermal oxidized PS sample and surface absorbed silanol groups on PS samples during the chemical etched procedure.     

Structure and micro-mechanical properties of helium-implanted layer on Ti by plasma-based ion implantation

The present paper concentrates on structure and micro-mechanical properties of the helium-implanted layer on titanium treated by plasma-based ion implantation with a pulsed voltage of −30 kV and doses of 3, 6, 9 and 12 × 10¹⁷ ions/cm², respectively. X-ray photoelectron spectroscopy and transmission electron microscopy are employed to characterize the structure of the implanted layer. The hardnesses at different depths of the layer were measured by nano-indentation. We found that helium ion implantation into titanium leads to the formation of bubbles with a diameter from a few to more than 10 nm and the bubble size increases with the increase of dose. The primary existing form of Ti is amorphous in the implanted layer. Helium implantation also enhances the ingress of O, C and N and stimulates the formations of TiO₂, Ti₂O₃, TiO, TiC and TiN in the near surface layer. And the amount of the ingressed oxygen is obviously higher than those of nitrogen and carbon due to its higher activity. At the near surface layer, the hardnesses of all implanted samples increases remarkably comparing with untreated one and the maximum hardness has an increase by a factor of up to 3.7. For the samples implanted with higher doses of 6, 9 and 12 × 10¹⁷ He/cm², the local displacement bursts are clearly found in the load-displacement curves. For the samples implanted with a lower dose of 3 × 10¹⁷ He/cm², there is no obvious displacement burst found. Furthermore, the burst width increases with the increase of the dose.     

Fabrication of microelectrodes deeply embedded in LiNbO3 using a femtosecond laser

We present a novel technique to fabricate deeply embedded microelectrodes in LiNbO₃ using femtosecond pulsed laser ablation and selective electroless plating. The fabrication process mainly consists of four steps, which are (1) micromachining of microgrooves on the surface of LiNbO₃ by femtosecond laser ablation; (2) formation of AgNO₃ films on substrates; (3) scanning the femtosecond laser beam in the fabricated microgrooves for modification of the inner surfaces; and (4) electroless copper plating. The void-free electroless copper plating is obtained with appropriate cross section of microgrooves and uniform initiation of the autocatalytic deposition on the inner surface of grooves. The dimension and shape of the microelectrodes could be accurately controlled by changing the conditions of femtosecond laser ablation, which in turn can control the distribution of electric field inside LiNbO₃ crystal for various applications, opening up a new approach to fabricate three-dimensional integrated electro-optic devices.     

Mechanical properties of sol-gel derived lead zirconate titanate thin films by nanoindentation

Lead zirconate titanate (PZT) thin films are deposited on platinized silicon substrate by sol-gel process. The crystal structure and surface morphology of PZT thin films are characterized by X-ray diffraction and atomic force microscopy. Depth-sensing nanoindentation system is used to measure mechanical characteristics of PZT thin films. X-ray diffraction analyses confirm the single-phase perovskite structures of all PZT thin films. Nanoindentation measurements reveal that the indentation modulus and hardness of PZT thin films are related with the grain size and crystalline orientation. The increases of the indentation modulus and hardness with grain size are observed, indicating the reverse Hall-Petch effect. Furthermore, the indentation modulus of (1 1 1)-oriented PZT thin film is higher than those of (1 0 0)- and random-oriented films. The consistency between experimental data and numerical results of the effective indentation moduli for fiber-textured PZT thin films using Voigt-Reuss-Hill model is obtained.     

A study on the evaluation of cesium removal performance in soil washing process using flocculating agent

Journal of Radioanalytical and Nuclear Chemistry - As a result of nuclear power plant accidents such as Chernobyl and Fukushima, and even their maintenance, the soil is contaminated due to the...     

Carbon nitride with encapsulated nickel for semi-hydrogenation of acetylene: pyridinic nitrogen is responsible for hydrogen dissociative adsorption

A new mechanism of catalyst has been demonstrated in this article. With the interaction between carbon nitride (CN) and encapsulated nickel, the CN in the catalyst has been endowed with new active sites for the adsorption and activation of hydrogen while nickel itself is physically isolated from the contact with reactive molecules. For the selective hydrogenation of acetylene in large amount of ethylene, the catalyst shows excellent ethylene selectivity than the nickel catalyst itself, which is almost totally unselective. Meanwhile, the CN itself is inactive for the reaction. The results of characterization demonstrate that pyridinic nitrogen doped in the carbon matrix should be the active sites for hydrogen dissociative adsorption. The theoretical calculations further confirm the results and provide with the detail in the electron transfer between nickel and CN in the catalyst. The current results supply a new concept for design of high performance catalyst.     

Versatile cobalt complexes for initiating immortal ring‐opening polymerization (ROP) of lactide (LA), mediating living radical polymerization of t‐butyl acrylate (tBA) and catalyzing copolymerization of LA and tBA by combination of ROP and organometallic‐mediated radical polymerization

Low‐cost, highly active and versatile amino‐bis(phenolate) cobalt complexes are developed. The cobalt complexes can control living polymerization of different categories of monomers including lactide (LA) by immortal ring‐opening polymerization in argon and even in air and acrylate via living radical polymerization (LRP). The cobalt‐based catalysts were used for copolymerization of LA and acrylate. The immortal polymerization of LA using the cobalt complexes as initiators proceeds in argon and even in air and without the requirement for extensive drying techniques or inert atmosphere whilst retaining end‐group fidelity. The cobalt complexes are used to mediate LRP of t‐butyl acrylate (tBA) in methanol. The block copolymerization of LA and tBA catalyzed by single‐site cobalt organometallic catalyst is also reported for the first time. This cobalt system offers a versatile and green way to produce homopolymers and block copolymers.     

Enhanced antifungal activities of four Zn(II) complexes based on uniconazole

Four Zn(II) complexes, [Zn L ₂(SO₄)]_n ( 1 ), [Zn L ₄(H₂O)₂]?2(NO₃)?4EtOH ( 2 ), [Zn L ₂Cl₂]? L ( 3 ), and [Zn L ₂Br₂]? L ( 4 ) ( L  = uniconazole), were synthesized using a hydrothermal method and characterized by elemental analysis, FT‐IR spectroscopy, and single‐crystal XRD. Complex 1 formed a one‐dimensional polymer chain. However, complexes 2 ‐ 4 were obtained as zero‐dimensional mononuclear coordination compounds. The antifungal activities of these complexes were then evaluated against four selected fungi using the mycelial growth rate method. The resulting data indicate that all complexes show better antifungal activities than their ligands and mixtures. In addition, the interactions between the metal salts of complexes 1 ‐ 4 and uniconazole seem to be synergistic. Furthermore, the polymer chain structure of complex 1 significantly enhanced the bioactivity, especially against Botryosphaeria ribis ( I ). Density functional theory (DFT) calculations were carried out to help explain the enhanced bioactivity after the formation of Zn(II) complexes. The resulting data show that the HOMO–LUMO energy gaps of complexes 1 ‐ 4 (0.0578, 0.0946, 0.1053, and 0.1245 eV) are smaller than that of the free ligand (0.1247 eV) and correlate with the antifungal activity of the zinc complexes.