Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

过渡金属催化的1,6-烯炔环异构化反应

1,6-烯炔底物在过渡金属催化剂作用下的化学行为得到了广泛的研究,重点是关于过渡金属催化的1,6-烯炔环异构化反应.从反应机理角度入手,把1,6-烯炔环异构化反应按启动方式总结为三类,并对这三种方式启动的1,6-烯炔环异构化反应进行了详细地总结和阐述.     

Electron g-factor in a gated InAs-inserted-channel In0.53Ga0.47As/In0.52Al0.48As heterostructure

We report on electron g-factor in an InAs-inserted In_0.53Ga_0.47As/In_0.52Al_0.48As heterostructure. The gate voltage dependence of g-factor is obtained from the coincidence method. The obtained g-factor values are surprisingly smaller than the g-factor value of bulk InAs, and it is close to the bare g-factor value of In_0.53Ga_0.47As. The large change in g-factor is observed by applying the gate voltage. The obtained gate voltage dependence is not simply explained by the energy dependence of g-factor.     

非相干辐照对LiNbO3:Fe晶体光折变非线性的影响与控制作用

研究了非相干辐照对LiNbO3:Fe晶体中从自散焦到自聚焦的动态转换过程的影响和控制作用.无论是从前向还是从背向加入非相干辐照，都能加快自散焦、自聚焦过程以及从自散焦到自聚焦的转换过程，增大折射率的变化值.当非相干辐照以一定的时间间隔重复辐照在晶体上时，透射功率能迅速地上升和下降，具有明显的开关效应.这种在非相干辐照控制下折射率的迅速改变有望应用于全光学开关器件. 关键词： 非相干辐照 光伏效应 自散焦 自聚焦     

Noncollinear optical parametric amplification in lithium triborate seeded by a cw Ti:sapphire laser

Experimental investigations of a type-I noncollinear phase-matched optical parametric amplification based on lithium triborate, which was pumped by a 5-ns second-harmonic pulses from a Q-switched Nd:YAG, seeded by a cw Ti:sapphire laser at 800 nm, was presented. The experiments generated 2-ns signal output pulses at 800 nm, the maximum signal output pulse energy reached 19 μJ, the corresponding parametric gain was 44 dB. Furthermore, the experiments demonstrate that the 65 nm-FWHM parametric fluorescence gain spectrum could also be observed. A quantitative account of the ultrabroadband parametric fluorescence gain spectrum was given with our theory. The experimental measurements are in agreement with theoretical calculations.     

Propagation characteristics of linearly polarized Bessel-Gaussian beams through an annular apertured paraxial ABCD optical system

By means of Collins diffraction integral formula in the paraxial approximation and based on the fact that a hard aperture function can be expanded into a finite sum of complex Gaussian functions, an approximate analytical expression for linearly polarized Bessel-Gaussian beams passing through a paraxial ABCD optical system with an annular aperture has been derived. The results provide more convenient for studying their propagation and transformation than the usual way by using diffraction integral directly. By using the analytical expression and the diffraction integral formula some numerical simulations are done to illustrate for the propagation characteristics of a linearly polarized Bessel-Gaussian beam through an optical system with an annular aperture.     

Simulation of polarization effects in AlGaN/GaN heterojunction

Because of their large band-gap, large high-field electron velocity, large breakdownfield, and large thermal conductivity, GaN and its heterojunction with AlGaN and InGaNhave foreseeable potential in the applications of high-power/temperature electronics, andoptoelectronic devices operative in UV and visible wavelength. Polarization inducedelectric field can reach the magnitude of ~MV/cm[1,2]. For AlGaN/GaN based FETs theconcentration of sheet carrier induced by polarization in the cha…     

直流电弧等离子体炬的特性研究

介绍了局部热力学平衡下描述直流电弧等离子体炬的磁流体力学模型，采用数值模拟方法研 究了等离子体炬内等离子体的传热和流动特性、湍流对等离子体炬内等离子体特性的影响， 以及等离子体炬运行参数对等离子体特性的影响.将数值模拟结果与已有的实验结果进行了 比较. 关键词： 等离子体炬 磁流体力学 数值模拟     

Hyperbolic Schrödinger equation

Clifford algebra corresponds to Minkwoski space. The coupling between real object particles and light quantums can be discussed by Minkowski space’s directional strangeness. We introduce Galilei transfomation and Schr?dinger equation into Minkowski space and give a geometrical explanation for classical quantum theory.