Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability

The life of proton exchange membrane fuel cells (PEMFC) is currently limited by the mechanical endurance of polymer electrolyte membranes and membrane electrode assemblies (MEAs). In this paper, the authors report recent experimental and modeling work toward understanding the mechanisms of delayed mechanical failures of polymer electrolyte membranes and MEAs under relevant PEMFC operating conditions. Mechanical breach of membranes/MEAs in the form of pinholes and tears has been frequently observed after long‐term or accelerated testing of PEMFC cells/stacks. Catastrophic failure of cell/stack due to rapid gas crossover shortly follows the mechanical breach. Ex situ mechanical characterizations were performed on MEAs after being subjected to the accelerated chemical aging and relative humidity (RH) cycling tests. The results showed significant reduction of MEA ductility manifested as drastically reduced strain‐to‐failure of the chemically aged and RH‐cycled MEAs. Postmortem analysis revealed the formation and growth of mechanical defects such as cracks and crazing in the membranes and MEAs. A finite element model was used to estimate stress/strain states of an edge‐constrained MEA under rapid RH variations. Damage metrics for accelerated testing and life prediction of PEMFCs are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2346–2357, 2006     

Limit cycle for cubic system of Kolmogorov type with a conic algebraic trajectory

In this paper we study the existence of limit cycle for cubic system ()₃, of Kolmogorov type with a conic algebraic trajectory

Determination of inosine 5′-monophosphate and guanosine 5′-monophosphate in pig feed by capillary zone electrophoresis

A capillary zone clectrophoresis method was developed for the determination of IMP and GIMP, commonly used as flavor enhancers in poultry feed, in a real sample of complex composition. A baseline separation of inosine 5′-monophosphate and guanosine 5′-monophosphate was achieved within 10 min and the other components in the sample did not interfere with the separation. Quantitative results obtained from pig feed samples are presented. The separation conditions and experimental reproducibility are also discussed.     

四磺酸基酞菁锌在水和非水溶剂中的电化学性质研究

在非水溶剂（二甲基亚砜（ＤＭＳＯ）及Ｎ,Ｎ＿二甲基甲酰胺（ＤＭＦ））中的伏安曲线．呈现三对电流峰,表明存在三个可逆或准可逆酞菁配体的单电子转移过程,而在水溶液中则不呈现准可逆行为,且波形改变很大．此外,还比较了四磺酸基酞菁锌的水溶液在自然光和红光（６００～７００ｎｍ）照射下的循环伏安曲线,其氧化还原峰的数目和峰电位基本不变,但在红光照射下比自然光照射下的峰电流明显增大．     

A Study of Concentration Polarization on Ion Exchange Membrane Electrodialysis

The concentration polarization phenomena in ion exchange membrane electrodialysis have been studied with single exchange membrane cell. The limiting current densities of Asahi ion-permselective membranes CK-1 and CK-2, Selemion ion-exchange membranes CMV, AMV, DMV and ASV have been measured with Ag-AgCl reversible electrode in various electrolyte solutions under 25°C and constant flow rate. In sodium chloride solution, the cation exchange membrane is easier to occur concentration polarization than the anion exchange membrane. The limiting current density increases as the concentration of solution increases for the same kind of ion exchange membrane. The experimental limiting current densities of Selemion CMV and AMV in NaCl, KCl, MgCl₂, CaCl₂, BaCl₂, Na₂SO₄, NaOH and HCl aqueous solutions are measured. The results show that the limiting current density increases as the ion mobility and diffusivity increase, and is affected by the transference number of ion. For the mixture of electrolyte solution, there are linear relationship between limiting current density and equivalent fraction of electrolytes.     

A mechanistically guided design leads to the synthesis of an efficient and practical new reagent for the highly enantioselective,catalytic dihydroxylation of olefins

[structure: see text] The catalytic asymmetric dihydroxylation of olefins has been accomplished with high enantioselectivities using a proline-based catalyst. The pre-transition-state assembly for styrene is shown.