Preparation and characterization of aliphatic/aromatic copolyesters based on 1,4-cyclohexanedicarboxylic acid

A series of biodegradable aliphatic/aromatic copolyesters, poly(butylene terephthalate)-co-poly(butylene cyclohexanedicarboxylate)-b-poly(ethylene glycol) (PTCG), were prepared by a two-step melt polycondensation method and characterized by means of GPC, FTIR, NMR, DSC, TGA, etc. The effects of aliphatic ester content on the physical, mechanical and thermal properties, as well as in vitro and in vivo degradation behaviors were investigated. The decrease in mechanical strength was observed with an increase in poly(butylene cyclohexanedicarboxylate) (PBC) molar fraction. DSC results showed one melting point and two glass transition temperatures in all samples, and the melting temperature was found to go down gradually as more cyclohexanedicarboxylic acid (CHDA) was added. During the in vitro and in vivo degradation processes, erosion of the surface was dominant as evidenced by scanning electron microscopic observations. The copolyesters containing many CHDA units were featured by the higher water uptake and faster degradation due to much richer amorphous phase within them.     

Synthesis and Ionic Conductivity of Network Polymer Electrolytes with Internal Plasticizers

Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.     

Redox behaviour of cysteine in the presence of ammonium trioxovanadate(V)

The interaction of ammonium trioxovanadate(V) with cysteine in aqueous solution was studied by cyclic voltammetry and absorption spectroscopy techniques. In the absence of cysteine, the cyclic voltammogram (CV) of ammonium trioxovanadate(V) solution in 0.1 M phosphate buffer (pH 7) gave two peaks at -0.130 V (reversible) and -0.400 V (irreversible). These peaks (-0.130 V, -0.400 V) can be attributed to V(V)/V(IV) and V(IV)/V(III) redox processes, respectively. In the presence of cysteine at low scan rate (40 mV/s), the peak at -0.780 V, which is assigned to the irreversible reduction of free cystine, was observed. In addition, the reduction peak of the disulfidic anion S(2)(2-) was seen at -0.650 V. Under aerobic conditions, the peaks of the disulfidic anion S(2)(2-) and free cystine are well separated. From electronic spectra of ammonium trioxovanadate(V) and cysteine mixtures, LMCT transition associated with V(V)-cyteine complex was obtained at 743 nm. The stoichiometry (ML(2)) and stability constant (log beta(1:2)=6.67) of V(V)-cysteine complex were determined by means of mole ratio method.     

IONIC CONDUCTIVITY OF METHYLSILOXANE TERMINATED POLYETHYLENE OXIDE WITH LITHIUM PERCHLORATE NETWORK FILMS

Complex films of crosslinked poly(methylsiloxane-co-ethylene oxide) and lithium perchlorate were prepared. These solid state polymeric electrolytes show a markedly higher ionic conductivity, and excellent flexibility. The ionic conductivity of the network films closed to 10~(-5) Scm~(-1) at room temperature. The effects of Li~+ content, species and contents of crosslinking agents, molecular weight of poly(ethylene oxide) and temperature on the ionic conductivity of the network films were also investigated.     

The practical synthesis of a novel and highly potent analogue of bryostatin

Macrocycle 1 is a new highly potent analogue of bryostatin 1, a promising anti-cancer agent currently in human clinical trials. In vitro, 1 displays picomolar affinity for PKC and exhibits over 100-fold greater potency than bryostatin 1 when tested against various human cancer cell lines. Macrocycle 1 can be generated in clinically required amounts by chemical synthesis in only 19 steps (LLS) and represents a new clinical lead for the treatment of cancer.     

A Novel Preprocessing Algorithm for Three-Way HPLC Data

Orthogonal signal correction (OSC) was a data preprocessing algorithm. It ensured that the filtered information was irrelevant to concentration data while using it to filter the noise from the original data. This paper extended the OSC application range from two-way data to three-way data. Two drug data sets, Enoxacin, Norfloxacin, Ciprofloxacin and Betamethasone, cortisone acetate, prednisone acetate, showed that the application of the OSC algorithm to three-way HPLC data was feasible and needed further research.     

Three-component one-pot total syntheses of glyantrypine, fumiquinazoline F, and fiscalin B promoted by microwave irradiation

A microwave-promoted three-component one-pot reaction has been developed to provide access to the core pyrazino[2,1-b]quinazoline-3,6-dione (1) scaffold, which is common to several families of alkaloids with significant biological activities. By adapting this synthetic strategy through the use of selected Boc-amino acids and amino acid esters, we have accomplished highly efficient and concise total syntheses of glyantrypine (2), fumiquinazoline F (3), and fiscalin B (5), achieving overall yields of 55, 39, and 20%, respectively.     

氨基酸水杨醛席夫碱与铜(Ⅱ)配合物的合成及其抗菌活性和稳定性、结构间的关系

氨基酸水杨醛席夫碱与铜（Ⅱ）配合物的合成及其抗菌活性和稳定性、结构间的关系毕思玮＊刘树祥（曲阜师范大学化学系，曲阜２７３１６５）关键词：氨基酸水杨醛席夫碱铜（Ⅱ）稳定常数抗菌活性实验部分将１０ｍｍｏｌ氨基酸和０．５６ｇ（１０ｍｍｏｌ）ＫＯＨ溶于热的９...     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.