Selective Acetylation of Alcohols and Amines with Ethyl Acetate in the Presence of H<Subscript>6</Subscript>[PMo<Subscript>9</Subscript>V<Subscript>3</Subscript>O<Subscript>40</Subscript>] as the Catalyst

Summary. Acetylation of various alcohols and benzyl amine was tested in the presence of H₆[PMo₉V₃O₄₀], a mixed addenda heteropolyacid, in ethyl acetate under reflux condition. Phenols and anilines are not affected under the reaction conditions. Selective transestrification of alcohols can be achieved in the presence of phenol and aniline derivatives using this method.     

The Preparation and Characterization of Highly Dispersed PdO over Alumina for Low‐temperature Combustion of Methane

PdO/Al₂O₃ catalysts prepared by glow discharge plasma treatment followed by thermal calcination show a much higher dispersion and a better catalytic activity for methane combustion at relatively low temperatures. The dispersion of palladium active species by such plasma prepared catalysts is 29.7%, 5.4 times higher than that of conventional catalysts. XPS analysis indicates that a surface enrichment of Pd active species (PdO) has been achieved after plasma treatment. The surface atomic composition of PdO of plasma prepared catalysts reaches 10.5%. XRD characterization also confirms a wellcrystallized PdO phase present on the plasma prepared catalyst. The lightoff temperature of the plasma prepared catalyst is 370°C, 50°C lower than that obtained from the conventional catalyst.     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.     

Lanthanide nitrate complexes with 2-azacyclononanone

Thermal behavior of rare earth nitrate complexes with 2-azacyclononanone (AZA) with Ln(NO₃)₃·3(AZA) composition (where Ln=Gd, Er and Ho) was analyzed in kinetic point of view. Kinetic parameters were calculated from thermogravimetric data. All obtained results were similar. The first decomposition step was representative to the loss of ligand and the residue was essentially Ln₂O₃. Furthermore, a reaction path was proposed for the thermal decomposition of the Ln(NO₃)₃·3(AZA).     

Calycilactone A, a novel hexacyclic alkaloid from Daphniphyllum calycillum

A novel Daphniphyllum alkaloid with a rearranged fused-hexacyclic ring system, calycilactone A, was isolated from the leaves of Daphniphyllum calycillum (Daphniphyllaceae), and the structure and relative stereochemistry of the new compound were elucidated on the basis of spectroscopic data.     

Elastic scattering cross sections for 160<Superscript>°</Superscript> and 170<Superscript>°</Superscript>backscattering of 1.40-2.64 MeV protons from natural vanadium

Summary The elastic scattering cross sections of natural vanadium for protons have been measured for beam energies below 2.64 MeV in steps of 10 keV and in the angular 160° and 170°. The overall standard error (Δσ_Exp/σ_Exp) in the measured cross sections is estimated to be better than ±3% at all the beam energies and angles. The results are presented in graphical and tabular forms that should be useful for those who wish to use the cross sections for material analysis.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3 &#61620; 106, 1 &#61620; 106 and 0.5 &#61620; 106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.