Low-temperature preparation of F-doped TiO2 film and its photocatalytic activity under solar light

A novel and simple method for preparing F-doped anatase TiO₂ (defined as FTO) film with high photocatalytic activity was developed using titanium-n-butoxide and NH₄F as TiO₂ and fluorine precursors under mild condition, i.e. low temperature (lower than 373 K) and ambient pressure. The prepared samples were characterized by XRD, SEM, X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectrum (DRS), photoluminescence spectrum (PL) and TG-DSC analysis. The photocatalytic activity was evaluated by decomposing X-3B under artificial solar light. The results showed that the crystallinity of TiO₂ was improved by F-doping. F⁻ ions can prevent the grain growth, and the transformation of anatase to rutile phase was also inhibited. The doped fluorine atoms existed in two chemical forms, and the ones incorporated into TiO₂ lattice might take a positive role in photocatalysis. Compared with surface fluorination samples, FTO film exhibited better photocatalytic activity. The high photocatalytic activity of FTO may due to extrinsic absorption through the creation of oxygen vacancies rather than the excitation of the intrinsic absorption band of bulk TiO₂. Furthermore, the FTO can be recycled with little photocatalytic activity depression. Without any further treatment besides rinsing, after 6 recycle utilization, the photocatalytic activity of FTO film was still higher than 79%.     

Circular polarized electronically-controlled antenna array based on CRLH-TL

In this paper, a circular polarized electronically-controlled scanning microstrip antenna array is designed, which is based on composite right left-handed transmission line (CRLH TL) and is realized by varactor diodes. Proposed electronically-controlled antenna arrays till now are always linear-polarized as the axial ratio (AR) may be spoiled by the DC feed line, especially in the CRLH TL based case. A more separated CRLH TL integrated with active lumped elements is utilized to solve the problem. The antenna array is composed of the CRLH microstrip transmission line structure and circular polarized microstrip antenna. The direction of the main lobe varies from ?1° to ?20 ° by continuously modifying the varactor diodes bias voltages from 0 to 20 V with 5 V as a step. The AR remains below 3 dB in the scanning range. The simulation and experimental results show a good consistence.     

基于VISA的PXI设备访问新方法

由于PXI设备的灵活性,在访问过程中需要用户参与到配置过程中。为了方便用户,并增强PXI设备访问的安全性和准确性,避免系统因用户配置问题导致的功能异常,提出了一种基于VISA的以PXI设备串号为基础的设备访问方法。通过将PXI设备的串号信息固化在PXI设备的配置寄存器中,根据设备串号信息自动获得设备资源描述符,进而对设备进行访问。实际应用表明,该方法能够完成对PXI设备的访问,避免了用户的配置过程,实现了PXI设备资源的自动配置,增强了设备访问的安全性和准确性,具有良好的实际应用价值。     

Novel Microstrip Photonic Bandgap Cell Structures

In general, a planar microstrip photonic bandgap (PBG) structure os a periodic array of holes etched in the ground plane of a microstrip line. To use a circuit with a PBG, the PBG structure cannot be fixed on a metal base and needs to be shielded. In this paper, two kinds of novel microstrip PBG unit cells with special patterns etched in the strip line, which can be used as the conventional microstrip circuits, are proposed and analyzed in detail. The results show that the transmission line theory is valid for the theoretic analysis of PBG circuits.     

光波导三向力触觉传感技术及信号处理

本文阐述了一种新的光波导型三向力触觉传感器的工作原理和基本结构,并设计了实验系统。这种传感器由一个橡胶垫和一个光波导路等组成,在橡胶垫的一侧制作圆柱触头阵列,在其另一侧制作圆锥触头阵列,使得每个圆柱触头下面分布2×2个圆锥触头。圆柱触头与施力的物体接触,而圆锥触头与光波导板接触。施加到圆柱触头上的力的三个分量可以通过该圆柱触头所对应的2×2个圆锥触头与光波导板接触时溢出的光斑面积确定。通过CCD摄取此光斑送入计算机进行图象处理,从而可求出光斑面积大小。实验结果显示了力的三个分量能通过圆锥触头的四个接触面积求出。     

合肥国家同步辐射光源软X射线束空间相干性实验研究

本文从实验角度对合肥国家同步辐射实验室软X射线束的空间相干性进行了研究.利用放置在物面上的高分辨正性光刻胶,记录了中心波长为3.2nm的波带片和针孔直径为30μm组合的光场分布(光斑),获得相应条件下的爱里斑及空间相干直径实验数据;完成了一个双缝干涉实验.所得的这些结果与理论计算相一致.     

ELECTRON TRANSPORT BEHAVIOURS IN THE NITROGEN DIRECT CURRENT GLOW DISCHARGE

A Monte Carlo simulation is presented to describe the electron transport behaviours in the nitrogen direct current glow discharge. The energy and angular distributions of the electrons at different positions of the cathode dark space are calculated; their energy and density distribution features throughout the entire discharge are discussed. The influence of molecular vibrational excitation, typical for electron－molecule collisions, has been studied and the elementary process of active species generation has been illustrated. The simulated results reveal that, in the cathode dark space, the high-energy electrons are mainly forward scattering and behave as a high-energy ‘electron beam'. The sharp increase of the number of secondary electrons plays an important role in producing active species at the interface between the cathode dark space and the negative glow region. The vibrational excitation enhances the energy loss of electrons in the negative glow region.     

200KV重离子加速器及其应用

本文介绍一台采用双潘宁型多电荷重离子源的200kV重离子加速器,简述它在GaP光探测器的研制、聚合物材料和金属材料的离子注入改性等方面的研究与应用。     

Nonisothermal Crystallization Behavior of Polypropylene-C60 Nanocomposites

The nonisothermal crystallization behavior of polypropylene (PP) and PP-fullerene (C₆₀) nanocomposites was studied by differential scanning calorimetry (DSC). The kinetic models based on the Jeziorny, Ozawa, and Mo methods were used to analyze the nonisothermal crystallization process. The onset crystallization temperature (T_c), half-time for the crystallization (t_1/2), kinetic parameter (F(T)) by the Mo method and activation energy (ΔE) estimated by the Kissinger method showed that C₆₀ accelerates the crystallization of PP, implying a nucleating role of C₆₀. Furthermore, due to the reduced viscosity of PP by adding 5% C₆₀, the parameters of crystallization kinetics for the PP-5%C₆₀ nanocomposites changed remarkably relative to that of neat PP and when lower contents of C₆₀ were added to PP.