Electrochemical vapor generation of selenium species after online photolysis and reduction by UV-irradiation under nano TiO<Subscript>2</Subscript> photocatalysis and its application to selenium speciation by HPLC coupled with atomic fluorescence spectrometry

An online UV photolysis and UV/TiO₂ photocatalysis reduction device (UV–UV/TiO₂ PCRD) and an electrochemical vapor generation (ECVG) cell have been used for the first time as an interface between high-performance liquid chromatography (HPLC) and atomic fluorescence spectrometry (AFS) for selenium speciation. The newly designed ECVG cell of approximately 115 L dead volume consists of a carbon fiber cathode and a platinum loop anode; the atomic hydrogen generated on the cathode was used to reduce selenium to vapor species for AFS determination. The noise was greatly reduced compared with that obtained by use of the UV–UV/TiO₂ PCRD–KBH₄–acid interface. The detection limits obtained for seleno-DL-cystine (SeCys), selenite (Se^IV), seleno-DL-methionine (SeMet), and selenate (Se^VI) were 2.1, 2.9, 4.3, and 3.5 ng mL^–1, respectively. The proposed method was successfully applied to the speciation of selenium in water-soluble extracts of garlic shoots cultured with different selenium species. The results obtained suggested that UV–UV/TiO₂ PCRD–ECVG should be an effective interface between HPLC and AFS for the speciation of elements amenable to vapor generation, and is superior to methods involving KBH₄.     

A facile synthesis of highly functionalized dihydrofurans based on 1,4-diazabicyclo[2.2.2]octane (DABCO) catalyzed reaction of halides with enones

Treatment of halides 5 with electrophilic alkenes 2 afforded the corresponding dihydrofurans 3 and 4 in the presence of 1, 4-diazabicyclo[2.2.2]octane (DABCO) with good to excellent yields and in a stereoselective manner in most cases. Moreover, the stereoisomers 3 and 4 could be easily transformed each other in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU).     

Simultaneous Determination of Enalapril and Enalaprilat in Human Plasma by LC-MS: Application to a Bioequivalence Study

A rapid, simple and specific liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method has been developed and validated for the simultaneous determination of enalapril and its major active metabolite enalaprilat in human plasma. Benazepril hydrochloride was used as the internal standard. Plasma was deproteinized with acetone and centrifuged. The supernatant was transferred and evaporated to dryness and the residue dissolved in mobile phase. Samples were separated on a C18 column with a mobile phase of methanol–20 mM ammonium acetate (53:47, v/v) containing 0.15% trifluoracetic acid (v/v) with a pH of 3.0. Enalapril, enalaprilat and the internal standard were measured by electrospray positive selective ion monitoring mode. The method was validated over a linear range of 1.56–400 ng mL⁻¹ and the limits of quantification were 1.56 ng mL⁻¹ for both enalapril and enalaprilat using 0.1 mL plasma. Extraction efficiency was more than 84% and recoveries were in range of 93.65–101.17%. The intra-day relative standard deviations (RSD) were less than 8.16 and 7.05% and inter-day RSDs were within 8.42 and 5.72% for enalapril and enalaprilat, respectively. The storage stability of QC samples was investigated under various conditions. The method was successfully applied for the evaluation of the pharmacokinetics and bioequivalence of enalapril and enalaprilat in 20 healthy volunteers after an oral dose of 20 mg enalapril maleate.     

Inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology

The paper presents a procedure for the multi-element inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology. Total As(III, V), Se(IV, VI) and Sb(III, V) were determined according to the following procedure: titanium dioxide (TiO₂) was used to adsorb inorganic species of As, Se and Sb in sample solution; after filtration, the solid phase was prepared to be slurry for determination. For As(III), Se(IV) and Sb(III), their inorganic species were coprecipitated with Pb-PDC, dissolved in dilute nitric acid, and then determined. The concentrations of As(V), Se(VI) and Sb(V) can be calculated by the difference of the concentrations obtained by the above determinations. For the determination of As(III), Se(IV) and Sb(III), palladium was chosen as a modifier and pyrolysis temperature was 800 °C. Optimum conditions for the coprecipitation were listed for 100 ml of sample solution: pH 3.0, 15 min of stirring time, 40.0 μg l⁻¹ Pb(NO₃)₂ and 150.0 μg l⁻¹ APDC. The proposed method was applied to the determination of trace amounts of As(III, V), Se(IV, VI) and Sb(III, V) in river water and seawater.     

De novo sequencing of tryptic peptides sulfonated by 4-sulfophenyl isothiocyanate for unambiguous protein identification using post-source decay matrix-assisted laser desorption/ionization mass spectrometry

A simple method of solid-phase derivatization and sequencing of tryptic peptides has been developed for rapid and unambiguous identification of spots on two-dimensional gels using post-source decay (PSD) matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The proteolytic digests of proteins are chemically modified by 4-sulfophenyl isothiocyanate. The derivatization reaction introduces a negative sulfonic acid group at the N-terminus of a peptide, which can increase the efficiency of PSD fragmentation and enable the selective detection of only a single series of fragment ions (y-ions). This chemically assisted method avoids the limitation of high background normally observed in MALDI-PSD spectra, and makes the spectra easier to interpret and facilitates de novo sequencing of internal fragment. The modification reaction is conducted in C(18) microZipTips to decrease the background and to enhance the signal/noise. Derivatization procedures were optimized for MALDI-PSD to increase the structural information and to obtain a complete peptide sequence even in critical cases. The MALDI-PSD mass spectra of two model peptides and their sulfonated derivatives are compared. For some proteins unambiguous identification could be achieved by MALDI-PSD sequencing of derivatized peptides obtained from in-gel digests of phosphorylase B and proteins of hepatic satellite cells (HSC).     

Copper-catalysed photoinduced decarboxylative alkynylation: a combined experimental and computational study

Redox-active esters (RAEs) as alkyl radical precursors have demonstrated great advantages for C–C bond formation. A decarboxylative cross-coupling method is described to afford substituted alkynes from various carboxylic acids using copper catalysts CuCl and Cu(acac)₂. The photoexcitation of copper acetylides with electron-rich NEt₃ as a ligand provides a general strategy to generate a range of alkyl radicals from RAEs of carboxylic acids, which can be readily coupled with a variety of aromatic alkynes. The scope of this cross-coupling reaction can be further expanded to aliphatic alkynes and alkynyl silanes using a catalytic amount of preformed copper-phenylacetylide. In addition, DFT calculations revealed the favorable reaction pathway and that the bidentate acetylacetonate ligand of the copper intermediate plays an important role in inhibiting the homo-coupling of the alkyne.

Redox-active esters (RAEs) as alkyl radical precursors have demonstrated great advantages for Cu-catalysed C–C bond formation.     

Type 2 intramolecular N-acylnitroso Diels-Alder reaction: scope and application to the synthesis of medium ring lactams

Heteroatom variants of the type 2 intramolecular Diels-Alder reaction provide an efficient method for the preparation of bridged bicyclic heterocycles. The type 2 variant of the intramolecular N-acylnitroso Diels-Alder reaction is an effective method for the synthesis of bridged bicyclic oxazinolactams. Structural studies of the cycloadducts have allowed for quantification of the deformations of the bridgehead functionalities and provided a strategy for the stereoselective synthesis of substituted seven- and eight-membered ring lactams. Diastereoselective cycloadditions followed by cleavage of the oxazine ring afford azepin-2-ones or azocin-2-ones.     

Multilayer assembly and patterning of poly(p-phenylenevinylene)s via covalent coupling reactions

Poly(p-phenylenevinylene)s with amines and pentafluorophenyl esters on side chains were synthesized and assembled on solid substrates by sequential layer-by-layer (LBL) deposition. This approach enables the creation of robust multilayer thin films via in-situ covalent coupling reactions between successive layers. The buildup of the multilayers was followed by UV/vis absorption spectroscopy and ellipsometry. The observed complex assembly behavior suggests that both covalent and hydrogen-bonding interactions are involved in the formation of multilayer films. The organized structure and surface morphology of resultant multilayers were investigated by reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. This covalent LBL method was further applied to generate conjugated polymer micropatterns using microstamped self-assembled monolayers as templates.     

Influence of acid treatments of carbon nanotube precursors on Ni/CNT in the synthesis of carbon nanotubes

The Ni/CNT catalyst was fabricated by directly dipping carbon nanotube precursors refluxed in 4 M of nitric acid into Ni electroless plating bath, and used to synthesize new carbon nanotubes. The experimental results indicate that the duration of acid-treatment of carbon nanotubes precursors exerts a great influence on the catalysis of Ni/CNT in the synthesis of carbon nanotubes and hence the structures of the new carbon nanotubes. When the carbon nanotubes precursors were refluxed for 0.5 h in 4 M of nitric acid, bamboo-shaped carbon nanotubes (BSCNT) or Y junction carbon nanotubes in the carbon products were obtained. As the duration of acid-treatment of carbon nanotubes precursors increased to 6 h, the as-prepared Ni/CNT displayed higher activity, and the carbon nanotube products were high pure without any Y junction structure or any separation layers in hollow.     

Correlation of the gradient diffusion coefficients of human lactoferrin with interparticle interactions validated by photon correlation spectroscopy

The gradient diffusion coefficients of recombinant human lactoferrin, a glycoprotein that is of commercial interest, have been extensively investigated theoretically and experimentally. A theoretical prediction was developed to allow calculation of the thermodynamic coefficient in terms of the electrostatic repulsive forces, London-van der Waals forces, entropic forces and additional interactions of unknown source and determination of the hydrodynamic coefficient by a perturbation theory method. In addition, dilute limit calculations were carried out for both of them. The thermodynamic and hydrodynamic coefficients were incorporated in the generalised Stokes-Einstein equation to calculate the gradient diffusion coefficient. Dynamic light scattering experiments were also conducted under different physiochemical conditions in which the gradient diffusion coefficients and the mean sizes of the macromolecules were measured. It was shown that of the theoretical approaches studied, good quantitative agreement between theory and experiment was found.