Novel Water‐Soluble Shape‐Regulatable Luminescent Nanoparticles by Non‐Covalently Bonded Self‐Assembly

Summary: Novel non‐covalently connected water‐soluble nanoparticles that contain poly(fluorene‐co‐phenylene) with hydroxy‐capped alkoxy side chains (PF3BOH) and poly(acrylic acid) (PAA) have been obtained and characterized. With different proportions of PF3BOH and PAA, the shape and size of the nanoparticles can be regulated. The nanoparticles are quite stable in water with no precipitate being observed after weeks. Transmission electron microscopy and dynamic laser light scattering are used to confirm the morphology of the PF3BOH/PAA nanoparticles. Their optical properties have been investigated and show similar optoelectronic properties to a PF3BOH solid film although they do not undergo aggregation.

TEM images of the nanoparticles obtained upon varying the PAA/PF3BOH content.     

A simple and direct isolation of whey components from raw milk by gel filtration chromatography and structural characterization by Fourier transform Raman spectroscopy

A simple and economical method to isolate whey protein from fresh raw milk is developed by serial defatting, casein eliminating, lactose removing, and separating by gel filtration chromatography. Four major whey components, including immunoglobulin (Ig), bovine serum albumin (BSA), β-lactoglobulin (β-Lg) and -lactalbumin (-Lac), and a non-protein of low molecular mass (1.7 kDa) but strong absorbance at 280 nm, are detected simultaneously. The small non-protein molecule is rich in aromatic amino acids and thiol groups as supported by the structural characterization with near infrared Fourier transform Raman spectroscopy (FT-Raman). FT-Raman results show that the secondary structure of Ig is dominated by anti-parallel β-pleated sheet; BSA is mainly in -helix; both β-form and unordered structure are important in β-Lg; while -Lac is mostly in -helix coupling with random coil. Differences in the Raman profile for each whey component reflect their intrinsic compositional differences and distinct spatial arrangement. The S–S linkages diverging around 510–540 cm⁻¹ indicate that the conformation of disulfide bonds in each whey components is different, which may be responsible for their diversified behaviors in solubility, rheological and functional properties.     

以新型模板方法合成中孔SiO_2分子筛(英文)

以廉价、生物可降解的两性表面活性剂十四烷基甜菜碱作为模板剂,以正硅酸乙酯为硅源,在酸性条件下成功地合成了具有螺旋状孔道结构的 SiO_2中孔分子筛 .热重表征结果说明,采用溶剂萃取（乙醇的水溶液为萃取剂）的方法,近乎 100％的模板剂可以脱除回收 .     

trans‐(dl‐Isoleucinato‐N,O)[tris(2‐aminoethyl)amine‐κ4N]cobalt(III) diperchlorate

The racemic title compound, trans‐[N,N‐bis(2‐amino­ethyl)‐1,2‐ethanediamine‐κ⁴N]­(dl ‐isoleucinato‐N,O)­cobalt(III) di­per­chlor­ate, [Co(C₆H₁₈N₄)(C₆H₁₂NO₂)](ClO₄)₂, crystallizes in the enantiomorphous space group P2₁2₁2₁ with Z = 12 (Z′ = 3). Each of the three cations in the asymmetric unit represents a different chirality of the isoleucine ligand; two of them are R (or d ) and the third is the S (or l ) enantiomer. The mixture crystallizes in a so‐called unbalanced crystallization, in which the cations adopt a chiral array of composition RRS or SSR, depending on the crystal selected for data collection.     

Acceleration of Long‐Range Photoinduced Electron Transfer through DNA by Hydroxyquinolines as Artificial Base Pairs

The C‐nucleoside based on the hydroxyquinoline ligand (Hq) is complementary to itself and forms stable Hq–Hq pairs in double‐stranded DNA. These artificial Hq–Hq pairs may serve as artificial electron carriers for long‐range photoinduced electron transfer in DNA, as elucidated by a combination of gel electrophoretic analysis of irradiated samples and time‐resolved transient absorption spectroscopy. For this study, the Hq–Hq pair was combined with a DNA‐based donor–acceptor system consisting of 6‐N,N‐dimethylaminopyrene conjugated to 2′‐deoxyuridine as photoinducible electron donor, and methyl viologen attached to the 2′‐position of uridine as electron acceptor. The Hq radical anion was identified in the time‐resolved measurements and strand cleavage products support its role as an intermediate charge carrier. Hence, the Hq–Hq pair significantly enhances the electron hopping capability of DNA compared to natural DNA bases over long distances while keeping the self‐assembly properties as the most attractive feature of DNA as a supramolecular architecture.     

Dynamic mechanical properties of aluminum nitride/cyanate ester composites for high performance electronic packaging

Viscoelastic ature is one of the key features of polymeric composites. A series of cyanate ester (CE)‐based composites with different aluminum nitride (AlN) contents for high performance electronic packaging, coded as AlN/CE, were developed; the viscoelastic nature of AlN/CE composites was intensively investigated by employing dynamic mechanical analysis (DMA). Results show that the AlN content has a great effect on dynamic mechanical properties of AlN/CE composites. The storage modulus in the glassy region increases linearly with the addition of AlN as well as the increase of AlN content. Meanwhile, all composites also exhibit notably higher loss modulus than cured CE resin due to the appearance of new energy dissipation forms. In addition, the incorporation of AlN has a significant effect on damping factor peak. All reasons leading to these phenomena are analyzed from the view of structure–property relationship. Copyright © 2009 John Wiley & Sons, Ltd.     

Fullerenes as unique nanopharmaceuticals for disease treatment

As unique nanoparticles, fullerenes have attracted much attention due to their unparalleled physical, chemical and biological properties. Various functionalized fullerenes with -OH, -NH₂, -COOH, and peptide modifications were developed. It summarized the biological activities of fullerenes derivatives in cancer therapy with high efficiency and low toxicity, as reactive oxygen species scavenger and lipid peroxidation inhibitor, to inhibit human immunodeficiency virus and to suppress bacteria and microbial at low concentration. In addition, the mechanism for fullerene to enter cells and biodistribution of fullerene in vivo was also discussed. This research focuses on the current understanding of fullerenes-based nanomaterials in the potential clinical application as well as biological mechanism of fullerenes and its derivatives in disease therapy.     

Hydrogen Production by Water Dissociation in Surface‐Modified BaCoxFeyZr1−x−yO3−δ Hollow‐Fiber Membrane Reactor with Improved Oxygen Permeation

A porous perovskite BaCo_xFe_yZr_0.9?x?yPd_0.1O_3?δ (BCFZ‐Pd) coating was deposited onto the outer surface of a BaCo_xFe_yZr_1?x?yO_3?δ (BCFZ) perovskite hollow‐fiber membrane. The surface morphology of the modified BCFZ fiber was characterized by scanning electron microscopy (SEM), indicating the formation of a BCFZ‐Pd porous layer on the outer surface of a dense BCFZ hollow‐fiber membrane. The oxygen permeation flux of the BCFZ membrane with a BCFZ‐Pd porous layer increased 3.5 times more than that of the blank BCFZ membrane when feeding reactive CH₄ onto the permeation side of the membrane. The blank BCFZ membrane and surface‐modified BCFZ membrane were used as reactors to shift the equilibrium of thermal water dissociation for hydrogen production because they allow the selective removal of the produced oxygen from the water dissociation system. It was found that the hydrogen production rate increased from 0.7 to 2.1 mL H₂ min^?1 cm^?2 at 950 °C after depositing a BCFZ‐Pd porous layer onto the BCFZ membrane.     

A scheme for rapid prediction of cooperativity in hydrogen bond chains of formamides,acetamides, and N‐methylformamides

A scheme is proposed in this article to predict the cooperativity in hydrogen bond chains of formamides, acetamides, and N‐methylformamides. The parameters needed in the scheme are derived from fitting to the hydrogen bonding energies of MP2/6‐31+G** with basis set superposition error (BSSE) correction of the hydrogen bond chains of formamides containing from two to eight monomeric units. The scheme is then used to calculate the individual hydrogen bonding energies in the chains of formamides containing 9 and 12 monomeric units, in the chains of acetamides containing from two to seven monomeric units, in the chains of N‐methylformamides containing from two to seven monomeric units. The calculation results show that the cooperativity predicted by the scheme proposed in this paper is in good agreement with those obtained from MP2/6‐31+G** calculations by including the BSSE correction, demonstrating that the scheme proposed in this article is reasonable. Based on our scheme, a cooperativity effect of almost 240% of the dimer hydrogen bonding energy in long hydrogen bond formamide chains, a cooperativity effect of almost 190% of the dimer hydrogen bonding energy in long hydrogen bond acetamide chains, and a cooperativity effect of almost 210% of the dimer hydrogen bonding energy in long hydrogen bond N‐methylformamide chains are predicted. The scheme is further applied to some heterogeneous chains containing formamide, acetamide, and N‐methylformamide. The individual hydrogen bonding energies in these heterogeneous chains predicted by our scheme are also in good agreement with those obtained from Møller‐Plesset calculations including BSSE correction. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010