Rh(Ⅰ),Co(Ⅰ)和Ru(Ⅱ)双齿磷氢化物的合成.结构表征和催化加氢活性

膦配位的过渡金属氢化物被看作是烯烃及其他一些不饱含有机化合物催化加氢反应及氢甲酰化反应的催化活性物种,关于它们的结构与催化活性关系的研究,有着重要的理论意义和实际意义,通常单齿膦配位表现出较高的催化活性,而不同的金属中心在催化活性和选择性上也表现出明显的差别,反映了催化功能与催化活性物种的电子结构和空间结构之间存在着依存关系.膦配体过渡金属氢化物,通常是以它们的相应卤化物经氢化锂铝或硼氢化钠或肼还原得     

氧化钨薄膜微型电化学器件的研究

本文论述了WO_3薄膜氢离子敏器件的结构、原理、制备技术和测试分析。利用WO_3薄膜在H+溶液中由绝缘转化为导电特性,成功地研制成氢离子敏器件。这是一种简易而经济的微型pH敏器件技术。     

Measurement and correlation of solubilities of apigenin and apigenin 7-O-rhamnosylglucoside in seven solvents at different temperatures

The solubilities of apigenin and apigenin 7-O-rhamnosylglucoside in water, methanol, ethanol, 1-propanol, 1-butanol, acetone, and ethyl acetate from T = (288.2 to 328.2) K were measured. The solubilities of apigenin and apigenin 7-O-rhamnosylglucoside in selected solvents increase with increasing temperature, respectively. The experimental solubility data were correlated by a simplified thermodynamic equation and a three-parameter empirical equation.     

Rational Construction of Polymeric Cadmium(II) Benzimidazole for Transition Metal Ion Exchange

A 1D double‐helical coordination polymer {[Cd(pbbm)₂]₂(ClO₄)₄(H₂O)₂}_n ( 1 ) was successfully constructed by the reaction of Cd(ClO₄)₂ · 6H₂O with 1,1′‐(1,5‐pentanediyl)bis‐1H‐benzimidazole (pbbm). Interestingly, polymer 1 exhibits highly selective capacity for the ionic exchange of Zn²⁺ and Cu²⁺ over Co²⁺ and Ni²⁺ ions in the crystalline solid state when the crystals of 1 are immersed in the aqueous solutions of the perchlorate salts of Cu²⁺, Zn²⁺, Co²⁺, and Ni²⁺ ions, respectively, which indicates that central Cd^II ion exchange might be considered as being dominated by the coordination ability of metal ions to free functional groups, ionic radii of exchanged metal ions, and the solution concentration of adsorbed metal salts. The parent material‐ and ion‐exchange‐induced products are identified by FT‐IR spectroscopy, PXRD patterns as well as SEM and EDS measurements. In addition, the thermal stability of 1 was also investigated.     

Construction of different dimensional inorganic-organic hybrid materials based on polyoxometalates and metal-organic units via changing metal ions: from non-covalent interactions to covalent connections

Five POM-based hybrid materials have been designed and synthesized based on different metal ions under hydrothermal conditions, namely, [Zn(Hfcz)(H(2)O)(3)](H(3)fcz)(SiMo(12)O(40)).3H(2)O (1), [Cd(2)(Hfcz)(6)(H(2)O)(2)](SiMo(12)O(40)).H(2)O (2), [Co(2)(Hfcz)(2)(SiW(12)O(40))](H(3)fcz)(2)(SiW(12)O(40)).10H(2)O (3), [Ni(2)(Hfcz)(4)(H(2)O)(2)](SiW(12)O(40)).5H(2)O (4) and [Ag(4)(Hfcz)(2)(SiMo(12)O(40))] (5), where Hfcz is fluconazole [2-(2,4-difluorophenyl)-1,3-di(1H-1,2,4-triazol-1-yl)propan-2-ol]. Their crystal structures have been determined by X-ray diffraction, elemental analyses, IR spectra, and thermogravimetric analyses (TGA). There are 1D mono and double chain-like metal-organic units in compounds 1 and 2, respectively. Polyoxometalates and metal-organic units co-crystallize through hydrogen bonds. In compound 3, metal-organic sheets are pillared by one kind of polyanion through covalent connections to generate a sandwich double-sheet. The other kind of polyanion acts as a counter-ion and lies in two adjacent sandwich double-sheets through non-covalent interactions. Polyanions covalently link metal-organic sheets to extend to an unusual 3D 5-connected framework with the (4(4).6(6)) topology in 4. In compound 5, polyanions link metal-organic chains to form a sheet through covalent connections. It is interesting that compound 5 shows an intricate (4,5,10)-connected framework with (4(4).6(2))(4)(4(8).6(2))(2)(4(14).6(19).8(12)) topology based on two kinds of Ag cations as four-connected and five-connected nodes, and polyanions as ten-connected nodes, when AgO interactions are considered. It represents the highest connected network topology presently known for polyoxometalate systems. The structural differences among 1-5 indicate the importance of different metal-organic units, coordination modes of polyanions for framework formation, and the interactions between polyanions and metal-organic units. In addition, the luminescent properties of compounds 1, 2 and 5, and electrochemical behaviours of compounds 1-5 have been investigated.     

Simultaneous determination of bisphenol A and alkylphenol in plant oil by gel permeation chromatography and isotopic dilution liquid chromatography-tandem mass spectrometry

A simple analytical method was developed for the simultaneous analysis of bisphenol A (BPA), nonylphenol (NP) and octylphenol (OP) in plant oil. The target compounds were extracted by cyclohexane/ethyl acetate (1:1), purified by gel permeation chromatography (GPC), and analyzed by liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) in the negative ion mode. An isolator column was attached in front of the injection valve of the LC to separate background contaminants. Recovery studies were performed at three fortification levels. Mean recoveries were from 92.9% to 119.0%, with an acceptable coefficient of variation (4.4-18.5%, n=6). The limits of quantification of the method were 2, 2 and 0.5 μg/kg for BPA, NP and OP, respectively. This method can be applied for screening and confirming target compounds in plant oil.     

Neutral and cationic chiral NCN pincer nickel(II) complexes with 1,3-bis(2'-imidazolinyl)benzenes: synthesis and characterization

Chiral 1,3-bis(2'-imidazolinyl)benzenes 1a-e easily undergo direct nickelation at the C2 position of the central benzene ring via the C-H bond activation in the reaction with anhydrous NiCl(2) giving neutral NCN pincer nickel(II) complexes 2a-e in 40-87% yields. Treatment of the nickel pincers 2a or 2c with AgBF(4) in CH(3)CN-CH(2)Cl(2) afforded the cationic nickel pincers 3a or 3c in good yields. All the complexes were characterized by elemental analysis, (1)H, (13)C NMR, and IR spectra. Molecular structures of the neutral complexes 2a, 2b and 2c as well as the cationic complex 3c have been determined by X-ray single-crystal diffraction. The cationic nickel pincers 3 are found to be effective catalysts for the Michael addition of ethyl 2-cyanopropionate to methyl vinyl ketone in the presence of i-Pr(2)NEt base with a catalyst loading of 5 mol% even at -78 °C, producing the adduct in >99% yield after 24 h albeit with no ee.     

Impact of different potentials on the structures and energies of clusters

Cluster studies have attracted much interest in the past decades because of their extraordinary properties. To describe the interaction between atoms or molecules and predict the energies and structures, potential functions are developed. However, different potentials generally produce different structures and energies for a cluster. To study the effect of potentials on the structure of a cluster, He clusters in the size range of 13-140 are investigated by Lennard-Jones (LJ), Pirani, and Hartree-Fock-dispersion individual damping (HFD-ID) potential with dynamic lattice searching (DLS) method. Potential function curves, cluster structures, bonds, and energies of the global minima are compared. The results show that cluster energies decrease with the values of the potential functions, the differences between structures depend upon the disagreements of the potentials, and the preferable motif of a cluster changes from icosahedron to decahedron with the increase of the derivative of the short-range part of the potentials.