Reducing the Entropic Uncertainty via Non-Markovian Effect and Detuning in the Presence of Quantum Memory ∗

The influence of non-Markovian effect and detuning on the entropic uncertainty in the presence of quantum memory is studied by the time-convolutionless master-equation approach. The result shows that the entropic uncertainty in the presence of quantum memory is obviously dependent on both detuning and non-Markovian effect. The bigger the detuning is and the stronger the non-Markovian effect is, the smaller the entropic uncertainty is. Its physical explanation is that the known quantum information stored in the quantum memory can reduce or eliminate the entropic uncertainty about the measurement outcomes of another particle, which is entangled with the quantum memory.     

极值温差红外图像的自适应双局部增强算法

针对目前红外焦平面成像系统在观察目标、特别是极值温差目标时,各温度段灰度描述不均匀和细节不够的问题,提出了一种自适应红外图像双局部增强算法。详细介绍了通过空间分布和灰度统计特性两个方向实现对极值温差图像自适应增强的方法,该方法首先从红外图像的空间分布特性出发,将图像切割成多个局部图像,然后再从直方图灰度分布出发,将局部图像的直方图进行聚类分段,并对分段直方图均衡增强,最后对生成的每个局部图像增强结果进行线性插值拼接完成增强算法。通过在红外焦平面系统中实验证明了极值温差自适应的红外图像双局部增强算法的可行性,并获得了很好的效果,成像质量有明显提高。     

场景自适应的红外焦平面成像动态范围调整技术

针对红外焦平面对辐射强度较大的目标输出动态范围不足的问题,提出了一种场景自适应的红外焦平面成像动态范围调整技术。包括3个方面的内容：从图像中提取目标灰度特征,获取动态范围自适应依据;结合最小均方自适应滤波算法,对调整依据进行滤波预测后给出调节值;把灰度调节值转换成电平值,利用电平值设置红外焦平面偏置电压完成焦平面成像动态范围自适应。最后,对整体方案进行了实验验证。通过在红外焦平面成像系统中实验证明了基于场景成像动态范围自适应方法的可行性,并获得了很好的效果,成像质量有明显提高。     

Stability and convergence of optimum spectral non‐linear Galerkin methods

Our objective in this article is to present some numerical schemes for the approximation of the 2‐D Navier–Stokes equations with periodic boundary conditions, and to study the stability and convergence of the schemes. Spatial discretization can be performed by either the spectral Galerkin method or the optimum spectral non‐linear Galerkin method; time discretization is done by the Euler scheme and a two‐step scheme. Our results show that under the same convergence rate the optimum spectral non‐linear Galerkin method is superior to the usual Galerkin methods. Finally, numerical example is provided and supports our results. Copyright © 2001 John Wiley & Sons, Ltd.     

热处理对CH薄膜表面粗糙度及力学性能的影响

利用低压等离子体化学气相沉积法制备厚度约为7 m的辉光放电聚合物薄膜,将制备的薄膜样品放入通有氩气保护的热处理炉中加热至300 ℃,分别进行6,10,24 h的保温热处理。通过白光干涉仪观察分析了不同保温时间下辉光放电聚合物薄膜的表面粗糙度; 利用傅里叶变换红外吸收光谱分析了300 ℃条件下不同保温时间对薄膜结构的影响; 采用纳米压痕仪表征了不同保温时间热处理后,薄膜硬度及模量的变化。结果表明:随着保温时间的增加,薄膜的表面均方根粗糙度由12 nm降至4.43 nm。薄膜结构中甲基的相对含量减少,双键的相对含量增加,碳链变长,同时薄膜网络结构的交联化程度增强。硬度和模量随着保温时间的增加先减小后增大。     

激光诱导AZ31B镁合金薄板动态响应实验研究

为分析在激光冲击波作用下AZ31B镁合金薄板背面的动态响应,采用聚偏氟乙烯贴片传感器与数字示波器对强激光诱导的冲击波进行测量,得到压电波形,结合冲击波的传播特性,对弹塑性双波的传播规律进行了研究。结果表明：激光诱导的材料动态响应是快速的;压电波形图反映出的弹性前驱波与塑性加载波传播到靶材背面的时间与理论时间相符;弹性前驱波能量小引发的波形振幅较小,紧随着的塑性加载波能量大并引起较大振幅波动,弹塑性双波卸载过程与紧接着的加载过程导致了压电信号的波动振幅提高。     

非参数回归函数估计的渐近正态性

本文研究了独立或相依样本时非参数回归函数的Ｎａｄａｒａｙａ-Ｗａｔｓｏｎ估计，在简洁合理的条件下，证明了估计量的渐近正态性．获得的结论可在时间序列分析中得到应用．     

CdTe量子点-铜酞菁复合体系荧光共振能量转移的研究

以波长为780 nm、重复频率为76 MHz、脉宽为130 fs的飞秒激光作为激发光源, 采用超快时间分辨光谱技术研究了CdTe量子点-铜酞菁复合体系的荧光共振能量转移. 实验结果表明, 在780 nm的双光子激发条件下, 复合体系中CdTe量子点的荧光寿命随着铜酞菁溶液浓度的增加而减少, 荧光共振能量转移效率增加. 同时也研究了激发功率对荧光共振能量转移效率的影响. 结果表明, 随着激发光功率的增加, 复合体系溶液中CdTe量子点的荧光寿命增加, 荧光共振能量转移效率减小, 其物理机理是因为高激发功率下的热效应和由双光子诱导的高阶激发态的跃迁. 当激发光功率为200 mW时, 双光子荧光共振能量转移效率为43.8%. 研究表明CdTe量子点-铜酞菁复合体系是非常有潜力的第三代光敏剂.     

Influence of potential function asymmetries on the performance of nonlinear energy harvesters under white noise

To improve the broadband transduction capabilities of vibratory energy harvesters (VEHs) under random and non-stationary excitations, many researchers have resorted to purposefully introducing nonlinearities into the restoring force of the harvester. While performing this task, it is often very challenging to maintain a perfectly symmetric restoring force which yields a VEH with an asymmetric potential energy function. This paper investigates the influence of potential function asymmetries on the performance of nonlinear VEHs under white noise inputs. To that end, a quadratic nonlinearity is introduced into the restoring force and its influence on the mean output power of the harvester for mono- and bi-stable quartic potentials is investigated. It is shown that, for VEHs with a mono-stable quartic potential function, the mean output power increases with the degree of potential function asymmetry. On the other hand, for energy harvesters with a bi-stable quartic potential function, asymmetries in the restoring force appear to worsen performance especially for low to moderate noise intensities. When the noise intensity becomes sufficiently large, the influence of the potential function?s asymmetry on the mean power diminishes. Results also reveal that a VEH with a symmetric bi-stable quartic potential function produces higher mean power levels than the one with the most asymmetric mono-stable potential. As such, it is concluded that a VEH with a symmetric bi-stable potential is most desirable to improve performance under white noise.