SYNTHESIS OF LIGHT OLEFINS FROM SYNGAS VIA DIMETHYLETHR——A NEW TECHNIQUE PROCESS

A new route named as SDTO method for the synthesis of lightolefins from syngas has been proposed.That is to convert syngas todimethylether and then to convert dimethylether to light olefins.The catalystsfor the two conversion reactions have been developed.For the first reaction,the catulySt was synthesized by the combination of methanol synthesis catalystwith γ-Al_2O_3or zeolites which possesses both metallic and acidic functions.Thecatalyst for the second reaction was modified SAPO-34 molecular sieve.Thevariables of the reactions have also been investigated.The results from theserial connection of the two conversion steps without any separation show thatthe yield of C_2~-C_4~- olefins Could be>100g/(m~3 syngas).     

托卡马克能量约束及自举电流效应的初步考虑

基于Lee等人的离子温度梯度模导致的反常热能输运系数,本文研究了辅助加热托卡马克等离子体的能量约束行为,并对自举电流的效应作了初步考虑。结果表明,计算得到的能量约束时间随等离子体电流I_p和托卡马克大半径R增大而增长,随注入功率P_t、环向场B_t以及等离子体小半径α的增大而缩短。这些结果与Kaye-Goldston的经验约束定标具有相同的趋势。自举电流的存在总是导致能量约束时间的增加,当自举电流与总电流的比值γ较小时,能量约束时间的增加率约为γ/2。此外,自举电流将造成锯齿反转半径的减小。     

非磁杂质对高Tc超导电性的影响

本文证明了在氧化物高T_c超导体的Anderson晶格模型中,由于序参量是能量的函数,非磁掺杂也具有拆对效应,在稀掺杂情况下,求出了T_c随杂质浓度增加而线性下降的规律,与实验结果相符,文中还计算了掺杂对超导态密度中能隙的影响,结果表明,当非磁掺杂浓度增加时,零温能隙的减小比T_c的下降慢得多,从而在转变为正常态之前可能不出现类似通常BCS超导体磁性掺杂的无能隙区。 关键词：     

HL—1装置中心热区电子热传导初步分析

在电流及温度分布满足“不变性”原理的基础上,本文分析了等离子体中心热区的能量平衡,求出了电子热传导系数,根据实验数据拟合出HL-1装置电子热传导系数的定标关系为X_e=6.8(n_(eq1))~(-1.2)。此关系与其他托卡马克装置的结果类似。     

摩擦离合器的数学模型及其算例

用力学分析的方法 ,建立了摩擦离合器的数学模型 ,求出了摩擦离合器中扭力弹簧的圈数 ,其计算值与实际值基本一致 .该模型对摩擦离合器的设计有一定的参考价值 .     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

物理实验课程考核、评估体系初探

对物理实验课程考核、评估方法进行了探讨，提出了物理实验课程考核、评估体系及实施细则．重点介绍了体系中的核心部分——正规的物理实验课程考试．     

中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。