弱碱性阴离子交换树脂分离1,6—二磷酸果糖的研究

采用弱碱性阴离子交换树脂HJ-30对发酵液中1，6-二磷酸果糖的分离进行了研究。详细地研究了树脂的吸附和脱附性能。实验结果表明，HJ-30树脂对FDP的吸附量达0．28gFDP／g湿树脂，以0．05mol／LNaCl洗脱光机磷和1mol／LNaCl洗脱1，6-二磷酸果糖，产品的收率和纯度分别为92％和99．4％。     

Er:Yb:KGW激光晶体生长及缺陷研究

采用顶部籽晶(TSSG)法生长ErYbKGW晶体.通过研究助熔剂的种类、组成与溶质的比例关系对晶体生长的影响,设计了合理的工艺条件转速30～40 r·min-1;拉速1～2 mm·d-1;降温生长速率0.05 ℃·h-1;降温速率15 ℃·h-1;生长周期15～20 d.通过对晶体缺陷的观察分析认为,晶体裂缝及包裹物等缺陷与生长工艺条件密切相关,应尽量减少生长过程中的温度、浓度及生长速度的波动,保持晶体的稳态生长.     

N-取代吩噻嗪和DDQ的电荷转移络合作用

具有盼嘤酸化学结构的化合物有广泛的用途I‘－＼其中吩嘤埃衍生物在医学上用作抗精神病药物特别受到药理学家们的注意，发现其药理作用与其分子提供电子的能力有关卜‘」但是我们应该注意到，作为抗精神病药物的吩嚷嚷衍生物，其吩座爆分子的氮原子都连有一个叔胺基链问，例如氯丙障（I）和奋乃静（11）．而我们知道，胺类特别是叔胺类有强的提供电子的能力＊；在上述的药物分子中是主要的提供电子因素，因此以这类化合物作为给体研究其供电子能力，是不能实际反映吩嘤嗓分子本身的给电子能力的．吩嘤噪类属于二苯并杂环化合物，分子中既…     

三正辛胺修饰电极伏安测定痕量金的研究

用化学修饰电极伏安测定痕量金,Kalcher K等曾采用阴离子交换剂碳糊修饰电极及打萨宗碳糊修饰电极检测100～300μg/L的金。本文采用三正辛胺(TOA)修饰玻碳电极,在1.5 mol/L介质中,Au(Ⅲ)在+0.16 V(vs SCE)处有一灵敏的不可逆还原峰。检出限为0.1μg/L。灵敏度比文献方法高千倍。Au(Ⅲ)浓度在5×10~(-7)～5×10~(-9)mol/L范围内峰高与浓度     

Swelling kinetics and release characteristic of crosslinked chitosan: Polyether polymer network (semi-IPN) hydrogels

The aqueous swelling kinetics of a series of crosslinked chitosan (cr-CS) with glutaraldehyde (GA) interpenetrating polyether hydrogels have been studied as functions of pH, the N-deacetylation degree of chitosan, the amount of crosslinking agent, the electrolyte composition in solution, temperature, and gel composition. Based on these results, the swelling mechanism of the hydrogels was discussed. The release profiles of chlorhexidini acetas from the semi-IPN were also investigated. © 1994 John Wiley & Sons, Inc.     

Aluminum Lon Removal from Monoaluminum Ovotransferrin by Pyrophosphate

The rates at which aluminum was removed from the N- and C-terminal monoaluminum ovotransferrins by pyrophosphate were evaluated by UV difference spectra in 0.01 mol/L Hepes, pH=7.4 and at 37℃. Pesudo first-order rate constants as a function of pyrophosphate concentration were measured. The results indicate that the pathways of aluminum removal are different. For the N-terminal binding site, aluminum removal follows simple saturation kinetics, while the removal of aluminum from the C-terminal binding site reverts to the combination of saturation and first-order kinetics. The saturation component is consistent with a rate-limiting conformational change in the protein as has been reported. We propose that the first-order kinetics mechanism is attributed to a pre-equilibrium process. The rate constants of saturation kinetics are accelerated from both terminals with the addition of 0.1 mol/L chloride to the monoaluminum ovotransferrin solutions, whereas the rates of the first-order kinetics are decreased for the C-terminal binding site. The effect of chloride ionic strength causes a continuing increase on kobs for the N- and C-terminal binding sites. Moreover, the kinetics behavior of the N-terminal is more easily affected by chloride than that of the C-terminal. In the experiment presumably the N-terminal site is apparently kinetically more labile than the C-terminal site.     

Diterpene derivative and chromone from Hypericum perforatum

A novel diterpene derivative, 5-methyl-5-(4,8,12-trimethyl-tridecyl)-dihydro-furan-2-one (1) and a new chromone, 5-hydroxy-7-methoxy-3-methyl-chromen-4-one (2), along with a known compound, phytol (3) have been isolated from the aerial parts of Hypericum perforatum. Their structures were established on the basis of spectroscopic analysis and by comparison with published values.     

Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

Studies on Interactions of Antibiotics with Serum Albumin by Surface Plasmon Resonance Biosensor

Introduction Humanserumalbumin(HSA)isawell known transportproteinforavarietyofmoleculesandions[1].Thebindingofadrugtoserumalbuminhasimportant pharmacokineticconsequencesbecauseitinfluences distribution,excretionandpharmacologicaleffectsof thedruginthebody…     

Optimization of zinc phosphate coating on 7075-T6 aluminum alloy

A zinc phosphate coating process on 7075-T6 aluminum alloy has been significantly improved through a combined approach of titanium colloid pretreatment, pH level adjustment, fluoride additive and ZnO/H₃PO₄ ratio adjustment. In particular, optimum phosphate coatings were formed in coating baths with a ZnO/H₃PO₄ ratio of 0.205 and 0.256. Coating morphology studied by SEM reveals that the adjustment in the coating procedure produces an improved crystalline coating layer with high coverage and small grain size. For coatings formed in a bath with a ratio of 0.205, the coverage of the crystalline patches on top of the amorphous coating base is almost complete. The chemical composition of the coating layers has been characterized by XPS and SIMS. The crystalline and amorphous coating phases formed in the bath with a ratio of 0.205 were found to have compositions given schematically as Zn_x(PO₄) and Zn_xAl_y(PO₄), respectively. In contrast, neither coating phase formed in the bath with a ratio of 0.256 shows the presence of Al.