模拟回火马尔可夫链蒙特卡罗全波形分析方法

针对传统的全波形分析方法不能快速自动处理全波形数据的缺点,提出了一种模拟回火马尔可夫链蒙特卡罗全波形分析法,用于求解全波形数据中的波峰数和峰值位置等参量.该方法采用Metropolis更新策略求解波峰数量和噪声两个参量,以达到快速求解的目的;而峰值位置和波峰幅值则采用改进的模拟回火策略求解,通过添加的主动干预回火步骤实现对参量更新过程的有效探测,以满足对速度或运算收敛性的要求.模拟回火马尔可夫链蒙特卡罗全波形分析方法以马尔可夫算法为基础,仍保持马氏链的收敛性,从而保证本方法具有良好的鲁棒性,实现对全波形数据的自动化处理.     

The effects of rain clutter on millimeter radar performance

The effects of rain clutter on millimeter radar performance are investigated at 35, 94 and 140GHz frequencies, including rain attenuation, radar reflectivity, maximum radar range and equivalent target cross section.     

Effects of sintering temperature and atmosphere on magnetism in Mn-doped TiO2 bulk samples

Magnetic properties have been investigated on Mn doped TiO₂(Ti_0.98Mn_0.02O₂) bulk samples prepared by solid state reaction, which were sintered at different temperature ranging from 450 ^°C to 900 ^°C in air and argon atmosphere, respectively. The results show that the magnetic properties were strongly dependent on the sintering temperature and atmosphere. For samples sintered in air, the magnetization initially increase with the increase of sintering temperature up to 600 ^°C and thereafter it decrease. While the magnetization of samples sintered in argon atmosphere decreases monotonically with the increase of sintering temperature. Furthermore, for samples sintered at 600 ^°C in air, the magnetic susceptibility exhibits a dominant Curie-Weiss behaviour and no magnetic transition is observed over the temperature range from 10 to 300 K. In contrast, for samples sintered in argon atmosphere, besides the magnetic transition near 45 K perhaps caused by Mn₃O₄, another magnetic transition appears near room temperature.     

Application of the first collision source method to CSNS target station shielding calculation

Ray effects are an inherent problem of the discrete ordinates method. RAY3 D, a functional module of ARES, which is a discrete ordinates code system, employs a semi-analytic first collision source method to mitigate ray effects. This method decomposes the flux into uncollided and collided components, and then calculates them with an analytical method and discrete ordinates method respectively. In this article, RAY3 D is validated by the Kobayashi benchmarks and applied to the neutron beamline shielding problem of China Spallation Neutron Source(CSNS)target station. The numerical results of the Kobayashi benchmarks indicate that the solutions of DONTRAN3 D with RAY3 D agree well with the Monte Carlo solutions. The dose rate at the end of the neutron beamline is less than10.83 μSv/h in the CSNS target station neutron beamline shutter model. RAY3 D can effectively mitigate the ray effects and obtain relatively reasonable results.     

Development of a portable and fast wire tension measurement system for MWPC construction

In a multi-wire proportional chamber detector(MWPC), the anode and signal wires must maintain suitable tension, which is very important for the detector's stable and accurate performance. As a result, wire tension control and measurement is essential in MWPC construction. A high pressure3 He MWPC detector is to be used as the thermal neutron detector of the multi-functional reflectometer at China Spallation Neutron Source, and in the construction of the detector, we have developed a wire tension measurement system. This system is accurate,portable and time-saving. With it, the wire tension on an anode wire plane has been tested. The measurement results show that the wire tension control techniques used in detector manufacture are reliable.     

Refractive indices of biaxial crystals evaluated from the refractive indices ellipsoid equation

The expressions of the refractive indices corresponding wave vector k(θ,) are given by using coordinate transformations for the refractive indices ellipsoid equation of biaxial crystals. The refractive index expression of the wave, whose velocity is slower, is given by

and that of the wave, whose velocity is faster, is given by

     

Computational studies on two novel energetic nitrogen‐rich compounds based on tetrazolone

Two novel energetic nitrogen‐rich compounds 1,4‐diaminotetrazol‐5‐one ( DATO ) and 1,4‐dinitrotetrazol‐5‐one ( DNTO ) were proposed first and studied by quantum chemistry method with B3LYP/6‐31G* level of theory. The optimized geometry, IR predicted spectrum and thermochemical parameters, frontier molecular orbitals and molecular electrostatic potential were calculated for inspecting the electronic structure, molecular stability and chemical reactivity. The important macroscopic properties including density, enthalpy of formation, detonation parameters and impact sensitivity have been predicted as well. As a result, two designed compounds DATO and DNTO possess positive enthalpy of formation (395.79 and 342.77 kJ/mol), impressive detonation parameters (D = 8.80 km/s, P = 33.69 GPa; D = 8.89 km/s, P = 34.98 GPa) superior to the remarkable explosive RDX, acceptable sensitivities and might be promising candidates of energetic materials. Copyright © 2015 John Wiley & Sons, Ltd.     

用液晶空间光调制器产生光阱阵列

液晶空间光调制器能够方便地用于制作各种衍射型光学元件, 但液晶空间光调制器存在分辨率有限的缺点, 本文提出了用液晶空间光调制器制作相位型光栅, 产生一维和二维光阱阵列的新方案, 用迭代傅里叶级数算法优化设计光栅的相位分布, 在不改变空间光调制器硬件参数设置的情况下, 充分利用和发掘了空间光调制器的优点, 同时又能较好地回避其所存在的缺陷. 根据现有的空间光调制器的技术参数, 模拟仿真设计光栅, 计算光强分布, 结果表明: 用大失谐、小功率激光照明, 能够产生具有很高峰值光强和光强梯度的光阱阵列, 囚禁冷原子的光学偶极势达到mK量级, 对原子的作用力远大于原子的重力.     

Influence of annealing treatment on as-grown Ib-type diamond crystal at a high temperature and high pressure

In this paper,we report on the influence of annealing treatment on as-grown Ib-type diamond crystal under high pressure and high temperature in a china-type cubic anvil high-pressure apparatus.Experiments are carried out at a pressure of 7.0 GPa and temperatures ranging from 1700 C to 1900 C for 1 h.Annealing treatment of the diamond crystal shows that the aggregation rate constant of nitrogen atoms in the as-grown Ib-type diamond crystal strongly depends on diamond morphology and annealing temperature.The aggregation rate constant of nitrogen remarkably increases with the increase of annealing temperature and its value in octahedral diamond is much higher than that in cubic diamond annealed at the same temperature.The colour of octahedral diamond crystal is obviously reduced from yellow to nearly colorless after annealing treatment for 1 h at 1900 C,which is induced by nitrogen aggregation in a diamond lattice.The extent of nitrogen aggregation in an annealed diamond could approach approximately 98% indicated from the infrared absorption spectra.The micro-Raman spectrum reveals that the annealing treatment can improve the crystalline quality of Ib-type diamond characterized by a half width at full maximum at first order Raman peak,and therefore the annealed diamond crystals exhibit nearly the same properties as the natural IaA-type diamond stones of high quality in the Raman measurements.