Separation of isorhamnetin 3‐sulphate and astragalin from Flaveria bidentis (L.) Kuntze using macroporous resin and followed by high‐speed countercurrent chromatography

D4020 resin offered the best dynamic adsorption and desorption capacity for total flavonoids based on the research results from ten kinds of macroporous resin. A column packed with D4020 resin was used to optimize the separation of total flavonoids from Flaveria bidentis (L.) Kuntze extracts. The content of flavonoids in the product was increased from 4.3 to 30.1% with a recovery yield of 90%. After the treatment with gradient elution on D4020 resin, the contents of isorhamnetin 3‐sulfate and astragalin were increased from 0.49 to 8.70% with a recovery yield of 74.1% and 1.16 to 30.8%, with a recovery yield of 92.2%, respectively. Further purification was carried out by one‐run high‐speed countercurrent chromatography yielding 4.5 mg of isorhamnetin 3‐sulfate at a high purity of 96.48% and yielding 24.4 mg of astragalin at a high purity of over 98.46%.     

Identification and Purification of the CPD Photolyase in Vibrio parahaemolyticus RIMD2210633

Photoreactivation is an error‐free mechanism of DNA repair, utilized by prokaryotes and most eukaryotes and is catalyzed by specific enzymes called DNA photolyases. Photoreactivation has been reported in Vibrio parahaemolyticus WP28; however, information on photolyases in V. parahaemolyticus (V.p) strains has not been reported. This study examined the photoreactivation in V.p RIMD2210633. The photolyase responsible for repairing cyclobutane pyrimidine dimer (CPD) in DNA was identified, and the corresponding gene was determined as VPA1471. The protein was overexpressed in Escherichia coli and was purified for functional assessment in vitro. The mRNA level and protein expression level of this gene increased after ultraviolet A (UVA) illumination following ultraviolet C (UVC) irradiation. In vitro experiments confirmed that the protein encoded by VPA1471 could reduce the quantity of CPD in DNA. We designated the corresponding gene and protein of VPA1471 phr and Phr, respectively, although the function of two other photolyase/cryptochrome family members, VPA0203 and VPA0204, remains unclear. UV (ultraviolet) irradiation experiments suggest that these two genes possess some photorepairing ability. Therefore, we hypothesize that VPA0203 and VPA0204 encode (6‐4) photolyase in V. parahaemolyticus RIMD2210633.     

Solvent free synthesis of trifluoromethyl tertiary alcohols by cross Aldol reaction

Exceedingly fast preparation of trifluoromethyl tertiary alcohols has been accomplished from methyl ketones and trifluoromethyl ketones under solvent free conditions by cross Aldol reaction. The reaction was achieved in the presence of common inorganic base by grinding method at ambient temperature to give β-trifluoromethyl-β-hydroxyl ketones in high yields (up to 95%).     

Fabrication and performance of microencapsulated phase change materials with hybrid shell by in situ polymerization in Pickering emulsion

Microencapsulated phase change materials (MePCMs) using melamine–formaldehyde resin/SiO₂ as shell were investigated in this paper. Organically modified SiO₂ particles were employed to stabilize Pickering emulsion, and in situ polymerization of melamine and formaldehyde was carried out to form hybrid shell. The performances of resultant MePCMs with hybrid shell were investigated comparatively with the MePCMs with polymer shell. SiO₂ particles raise the microencapsulation efficiency by improving the stability of emulsion and providing a precipitation site for melamine–formaldehyde resin. Also, the mechanical strength, thermal reliability, and anti‐osmosis performance of MePCMs were improved significantly by SiO₂ particles in the shell. Our study shows that Pickering emulsion is a simple and robust template for MePCMs with polymer‐inorganic hybrid shell. Copyright © 2015 John Wiley & Sons, Ltd.     

Lysine‐based functional blocked isocyanates for the preparation of polyurethanes provided with pendant side groups

This article describes a methodology to prepare polyurethanes (PUs), decorated with pendant (bio)functional side groups, by polymerizing (bio)functionalized blocked diisocyanates with polyols. Caprolactam blocked lysine diisocyanate methyl ester (BLDI‐OMe) was prepared in high yields, by reacting the methyl ester of lysine with carbonyl biscaprolactam. In the absence of a catalyst, the polymerization of BLDI‐OMe with polycaprolactone and polytetrahydrofuran resulted in strictly linear PUs due to the high selective reactivity of the blocked isocyanates (BIs). Although the ester appeared to be less reactive, we found hydrolyzing conditions for the ester, without affecting the BIs. The free acid groups were converted into a N‐hydroxysuccinimide (NHS) activated ester, which was a versatile intermediate for further functionalization. After having demonstrated that model amines were able to substitute NHS without effecting the BIs groups, the same chemistry was used to couple biotin, giving a biotin functional caprolactam blocked lysine diisocyanate. The polymerization with polyols afforded the corresponding biotin‐functional PUs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2036–2049     

Small molecule‐mediated glass transition of acrylic copolymers: Effect of hydrogen bonding strength on glass transition temperature

Poly(styrene‐co‐ethyl acrylate) [P(St‐co‐EA)] with different ratios of St/EA was mixed with the small molecule 4,4′‐thio‐bis(6‐tert‐butyl‐m‐methyl phenol) (AO300) to investigate the influence of hydrogen bonding strength on the glass transition behavior. The glass transition temperature (T_g) linearly increased after adding AO300, and the slope value decreased with increased St/EA ratio. All lines could be extended to 62 °C, demonstrating that T_g of the small molecule in situ detected by the polymer chain was much higher than that by small molecule itself (29 °C). Fourier transform infrared spectroscopy analysis showed that the small molecules began to be self‐associated at a concentration where the hydrogen bonded carbonyl ratio of the bulk polymer was approximately 0.5 and irrespective of the St/EA ratio. Above the critical loading, the mixture's T_g negatively deviated from the linearly extended lines because of self‐association of the small molecules. The apparent T_g of AO300 was found to strongly depend on intermolecular hydrogen bonding number and strength. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 400–408     

Antioxidative Cassane Diterpenoids from the Seeds of Caesalpinia minax

Five new cassane diterpenoids, caesalmins I–M ( 1 – 5 ), and 23 known analogs were isolated from the seeds of Caesalpinia minax. Their structures were elucidated by spectroscopic methods and comparison with reported data. The antioxidant properties of 1 – 28 were determined by the method of oxygen radical absorbance capacity of fluorescein (ORAC‐FL), and 14 compounds exhibited good antioxidant activities with ORAC‐FL values of 2.24–4.89 Trolox equivalents. The structure? activity relationship of the active compounds was also discussed.     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

Conformation of curdlan as observed by tapping mode atomic force microscopy

Tapping mode atomic force microscopy was used to study the bacterial polysaccharide curdlan deposited from dimethyl sulfoxide (Me₂SO) and NaOH aqueous solutions. For curdlan in Me₂SO, flexible single chains corresponding to a disordered conformation were observed at a concentration of 5 mg/l, and the chain diameter was measured to be 0.65±0.05 nm, which showed good agreement with the expected value of the single polysaccharide chain. Because the concentration of curdlan increased, the chains became more rigid and aggregated, subsequently, the network structures of curdlan appeared. However, curdlan samples deposited from a 5 mM NaOH solution showed entirely different conformations. The chains observed were almost in the form of micelles of several nanometers, which were supermolecular assemblies. The heterogeneously dense zones were observed as the curdlan concentration increased to 40 mg/l. When the concentration of curdlan was above 100 mg/l, which might cause the real concentration of curdlan on the mica substrate after drying treatment exceeding some critical value of gelation, gel network structures were formed. Keeping on increasing the concentration of curdlan, the image showed a more homogeneous fibrous network.     

A new molecular rectifier device and some research in its processing

Organic materials of D-π-A type MR-X (MR-1: p-dimethylaminophenylethenetrica-rbonitrile and MR-2: p-diphenylaminophenylethene tricarbonitrile) were designed and synthesized. The device with a sandwich structure shows good rectificative phenomena. The highest rectification ratio 10000 was achieved in device Cu/MR-1/Ag, and about 100 in other device M/MR-X/M (M: Cu, Ag). It has been found that rectificative phenomena exist only in the atmosphere-liquid interface region by means of liquid adsorption, and electric field could help form the oriented molecular film. __________ Translated from Journal of Fudan University (Natural Science), 2005, 44(4) (in Chinese)