Co3{CH3C(NH3)(PO3H)(PO3)}2 {CH3C(NH3)(PO3H)2}2(H2O)4·2H2O: A cobalt 1-aminoethylidenediphosphonate with a layer structure

This paper describes the structure and magnetic properties of a novel cobalt 1-aminoethylidenediphosphonate compound, namely Co₃{CH₃C(NH₃)(PO₃H)(PO₃)}₂{CH₃C(NH₃)(PO₃H)₂}₂(H₂O)₄·2H₂O (1). The structure contains a trimer unit of Co₃{CH₃C(NH₃)(PO₃H)(PO₃)}₂ in which two equivalent phosphonate ligands chelate and bridge the three cobalt ions. Each trimer unit is further linked to its four equivalent neighbors through corner-sharing of CoO₆ octahedra and CPO₃ tetrahedra, forming a two-dimensional layer in the bc-plane which contains 12-membered rings. These layers are connected to each other by extensive hydrogen bonds. Magnetic studies show that weak antiferromagnetic interactions are mediated between the cobalt ions. Crystal data for 1: monoclinic, space group C2/c, a=27.727(4), b=7.1091(11), , β=118.488(3), , Z=2.     

Schiff碱配合物的研究——Ⅸ.表面Schiff碱配合物对H2O2分解的催化作用

制备了两种表面Schiff碱及其Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺配合物,考察了它们对H₂O₂分解的催化性能,其活性顺序为:Co²⁺>Cu²⁺>Ni²⁺>Zn²⁺,且与金属离子氧化还原电位有关。溶液的pH值增加有利于催化反应,有机配体的加入则对反应有所抑制。     

Synthesis and Molecular Recognition of Molecularly Imprinted Polymer with Ibuprofen as Template

Ibuprofen and ketoprofen are chemically similar non‐steroidal anti‐inflammatory drugs widely used in the treatment of arthritis. Using a molecular imprinting technique, a simple and rapid method was developed for the simultaneous separation and determination of ibuprofen and ketoprofen. Molecular imprinting introduces artificial binding sites into a synthetic polymer matrix, allowing it to exhibit selective rebinding of template molecules. Imprinted polymers can be regarded as an HPLC stationary phase, important for pharmaceutical analysis. Most molecularly imprinted polymers (MIPs) are synthesized by free radical polymerization of functional monomers, resulting in an excess of crosslinking monomers. In this study, MIPs have been prepared with a ibuprofen template, which can form intramolecular hydrogen bonds. Methacrylic acid (MAA) and ethyleneglycol dimethacrylate (EGDMA) were used as the functional monomer and cross‐linker, respectively. Bulk polymerization was carried out at 4 °C under UV radiation. The resulting MIP was ground into 25?44 μm particles, which were slurry‐packed into analytical columns. Template molecules were removed by methanol‐acetic acid (9:1, v/v). We evaluated the template binding performance of the MIP using HPLC, with ultraviolet (UV) detection at 234 nm. Chromatographic resolution of ibuprofen and ketoprofen on the MIPs were appraised using buffer/acetonitrile (45/55, v/v) as the mobile phase. Results show that the MIPs prepared using ibuprofen as the template had a significant molecular imprinting effect. The method was successfully applied to the separation and analysis of ibuprofen and ketoprofen in pharmaceuticals.     

发酵液中谷氨酰胺提取新工艺

本文根据谷氨酸和谷氨酰胺的电离常数的差异，采用一种新型的离子交换工艺，通过单根阴离子交换柱，从谷氨酰胺发酵液中提取谷氨酰胺。粗晶溶解液通过阴离子交换柱后，谷氨酰胺最高收率达到83％，谷氨酸去除率90％。该法在显著提高产品收率的同时，还大大减少了酸碱用量。     

色谱法在三氯半乳蔗糖合成中的应用

采用薄层色谱和柱色谱法，选择优化展开体系，有效地分析了三氯半乳蔗糖中间体2，3，6，3′，4′-五氧乙酰蔗糖混合物，并证实该混合物中杂质为三苯甲醇，为三氯半乳蔗糖的合成研究取得了重要发现。     

流动注射分析光度法同时测定镍和铁

建立了流动注射（ＦＩＡ）光度法同时测定镍和铁的新方法，以乙酸－乙酸钠缓冲溶液（ＰＨ４．５０）作载液，溴化十六烷基三甲胺作增溶剂，记录５６０ｎｍ处Ｎｉ（Ⅱ）－Ｂｒ－ＰＡＤＡＰ与Ｆｅ（Ⅱ）－Ｂｒ－ＰＡＤＡＰ的峰值吸收之和７４６ｎｍ处Ｆｅ（Ⅱ）－Ｂｒ－ＰＡＤＡＰ的吸不度测定了钠基合金中的镍和铁。两咱离子的定量线性范围分别为０．１０－１．２０ｍｇ／ｌＬ和０．２０－１．６０ｍｇ／Ｌ，检出限为０．０２ｍｇ／Ｌ     

双(N 氧化吡啶 2-甲醛)缩1,2-丙二胺镍配合物的合成和晶体结构

合成所得双(N-氧化吡啶-2-甲醛)缩1,2-丙二胺的镍(II)配合物[Ni(piopn)(H_2O)_2](ClO_4)_2的晶体属空间群C_s~4-C_c, 晶胞参数a=0.7397(3) nm, b=1.3187(7) nm, c=2.5502(14) nm, β=102.18(4)°. 用分子轨道理论的近似方法分析了该配合物的电子结构和分子轨道, 探讨了分子的结构特征与红外光谱的关系.     

Different catalysis role of in‐loop and out‐of‐loop waters in assisting HNS/HSN proton transfer isomerizations: Bridging vs. surrounding effect

In this work, a density function theory (DFT) study is presented for the HNS/HSN isomerization assisted by 1–4 water molecules on the singlet state potential energy surface (PES). Two modes are considered to model the catalytic effect of these water molecules: (i) water molecule(s) participate directly in forming a proton transfer loop with HNS/HSN species, and (ii) water molecules are out of loop (referred to as out‐of‐loop waters) to assist the proton transfer. In the first mode, for the monohydration mechanism, the heat of reaction is 21.55 kcal · mol^?1 at the B3LYP/6‐311++G** level. The corresponding forward/backward barrier lowerings are obtained as 24.41/24.32 kcal · mol^?1 compared with the no‐water‐assisting isomerization barrier T (65.52/43.87 kcal · mol^?1). But when adding one water molecule on the HNS, there is another special proton‐transfer isomerization pathway with a transition state 10T′ in which the water is out of the proton transfer loop. The corresponding forward/backward barriers are 65.89/65.89 kcal · mol^?1. Clearly, this process is more difficult to follow than the R–T–P process. For the two‐water‐assisting mechanism, the heat of reaction is 19.61 kcal · mol^?1, and the forward/backward barriers are 32.27/12.66 kcal · mol^?1, decreased by 33.25/31.21 kcal · mol^?1 compared with T. For trihydration and tetrahydration, the forward/backward barriers decrease as 32.00/12.60 (30T) and 37.38/17.26 (40T) kcal · mol^?1, and the heat of reaction decreases by 19.39 and 19.23 kcal · mol^?1, compared with T, respectively. But, when four water molecules are involved in the reactant loop, the corresponding energy aspects increase compared with those of the trihydration. The forward/backward barriers are increased by 5.38 and 4.66 kcal · mol^?1 than the trihydration situation. In the second mode, the outer‐sphere water effect from the other water molecules directly H‐bonded to the loop is considered. When one to three water molecules attach to the looped water in one‐water in‐loop‐assisting proton transfer isomerization, their effects on the three energies are small, and the deviations are not more than 3 kcal · mol^?1 compared with the original monohydration‐assisting case. When adding one or two water molecules on the dihydration‐assisting mechanism, and increasing one water molecule on the trihydration, the corresponding energies also are not obviously changed. The results indicate that the forward/backward barriers for the three in‐loop water‐assisting case are the lowest, and the surrounding water molecules (out‐of‐loop) yield only a small effect. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Effect of electric field on liquid chromatographic separation of peptide digests. Combining capillary separation techniques

A system is described which allows operation of a range of capillary based liquid phase separations including capillary electrophoresis, isocratic and gradient capillary electrochromatography, isocratic and gradient capillary liquid chromatography and electrically assisted gradient capillary liquid chromatography. The system was coupled to electrospray ionization mass spectrometry in the electrically assisted capillary liquid chromatography mode to investigate the effect of applied voltage on the selectivity in peptide mapping separations. Analyses were performed on tryptic digests of recombinant human growth hormone and tissue plasminogen activator. The results show a small but useful effect on selectivity that can be used to fine tune specific separations.     

Immobilization and direct electrochemistry of cytochrome <Emphasis Type="BoldItalic">c</Emphasis> at a single-walled carbon nanotube-modified electrode

A single-walled carbon nanotube (SWNT)-modified electrode was fabricated and characterized by SEM and ac impedance techniques. The direct electrochemistry of cytochrome c (Cyt c), which was adsorbed on the surface of the SWNT, was studied by cyclic voltammetry. The results from cyclic voltammetry and infrared spectroscopy indicated that Cyt c remained in its original structure and did not undergo structural change after its immobilization on the SWNT. Further results demonstrated that the SWNT had promotional effects on the direct electron transfer of Cyt c and also indicated that the immobilized Cyt c retained its electrocatalytic activity to the reduction of H₂O₂. This modified electrode might be used in development of new biosensors and the biofuel cells.