钙钛矿型La_((1 x)/2)Sr_((1-x)/2)Co_(1-x)Cu_xO_3催化CO氧化活性与表征

研究了钙钛矿型LaSrCoCu_xO_3催化剂对CO氧化反应的催化活性及其表面氧的催化作用．结果表明，x＝0．4的催化剂对CO氧化具有最高催化活性，常压及本实验条件下CO完全氧化的最低温度为168℃；催化剂均为氧缺陷化合物，吸附于表面晶格氧缺陷上的吸附氧是CO氧化反应的活性氧物种；并发现催化剂中存在有非常价态的C04 ，认为CO氧化反应是通过吸附氧调变Co3 和Co4 价态而进行．     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

微波辐照下无皂阳离子聚(St-MMA)高分子纳米粒子的制备和表征

讨论了微波辐照下 ,以丙酮 水为分散介质 ,利用阳离子型自由基引发剂偶氮二异丁基脒盐酸盐(AIBA)引发苯乙烯 (St)和甲基丙烯酸甲酯 (MMA)共聚 ,合成出表面带正电荷的P(St MMA)共聚物纳米粒子 ,考察了丙酮用量、单体和引发剂浓度对纳米粒子粒径、粒径分布和乳液稳定性的影响 .结果表明 ,丙酮 水的体积比由 0增加到 1 2 6∶1时 ,粒子的平均水化半径从 12 2 2 1nm降低到 2 4 6 8nm ,粒径分布变宽 ,乳液抗电解质稳定性逐渐增强 ;增加引发剂和共聚单体MMA的浓度 ,粒子的水化半径逐渐减小 ,粒径分散系数增大 .     

2,5—双（4—羟基苯亚甲基）环戊酮中双电荷离子存在的串联质谱证据

应用串联质谱的碰撞诱导解离和联动扫描技术，研究了２，５－双（４－羟基苯亚甲基）环戊酮的质谱解离特征，提供了双电荷离子存在的实验证据。进一步对双电荷离子（ｍ／ｚ１４６）的碰撞诱导解离碎裂进行了讨论。     

Room‐Temperature Solution‐Processed PbS Quantum Dot Solar Cells

Colloidal quantum dots (CQDs) are attractive absorber materials for high‐efficiency photovoltaics because of their facile solution processing, bandgap tunability due to quantum confinement effect, and multi‐exciton generation. To date, all published performance records for PbS CQDs solar cells have been based on the conventional hot‐injection synthesis method. This method usually requires relatively strict conditions such as high temperature and the utility of expensive source material (pyrophoric bis(trimethylsilyl) sulfide (TMS‐S)), limiting the potential for large‐scale and low‐cost synthesis of PbS CQDs. Here we report a facile room‐temperature synthetic method to produce high‐quality PbS CQDs through inexpensive ionic source materials including Pb(NO₃)₂ and Na₂S in the presence of triethanolamine (TEA) as the stabilizing ligand. The PbS CQDs were successfully prepared with an average particle size of about 5 nm. Solar cells based on the as‐synthesized PbS CQDs show a preliminary power conversion efficiency of 1.82%. This room‐temperature and low‐cost synthesis of PbS CQDs will further benefit the development of solution‐processed CQD solar cells.     

Transition state modeling and catalyst design for hydrogen bond-stabilized enolate formation

[reaction: see text] A catalyst for enolate formation was designed that incorporates an amine base along with a thiourea to bind to the oxygen atom of the substrate and enolate through hydrogen bonding. A computational model of the transition state was developed in which the thiourea (modeled initially as a urea) and amine were separate molecules. This model and models incorporating one or two methanol molecules in place of the urea showed an out-of-plane hydrogen bond, apparently to the carbonyl pi-bond, in addition to an in-plane hydrogen bond to an unshared electron pair. In contrast, optimized complexes of the ketone and the fully formed enolate showed only in-plane hydrogen bonding. The transition state model with the urea and amine was used to define a database search with the computer program CAVEAT to identify structures suitable for linking the amine and urea/thiourea moieties in the transition state. On the basis of a group of structures identified from this search, a flexible but conformationally biased linker was designed to connect the two catalytic moieties. The molecule having the amine and thiourea moieties connected by this linker was synthesized and was shown to catalyze proton exchange between methanol and deuterated acetone. The catalyst was about 5-fold more efficient than the amine and thiourea as separate molecules and relative to a similar but less conformationally biased catalyst.     

热敏电阻温度计的设计与制作

本文介绍了设计性实验“热敏电阻的设计与制作”的实施情况。说明了只要选题合适、要求恰当,设计性实验不仅可行,而且对物理实验训练的总结提高十分有效。     

非晶态镍磷—镍钨磷双层组合镀层的耐蚀性能研究

本文对比研究了镍磷镀层、镍钨磷镀层及非晶态镍磷和镍钨磷双层组合镀层的耐蚀性能，分别进行了各种镀层的浸渍腐蚀实验，镀层的Ｘ射线衍射图象、镀层的扫描电镜图象、以及在工厂实际的腐蚀环境里进行的腐蚀实验。实验结果表明镍磷及镍钨磷双层组合镀层的耐 性优于镍磷镀层、镍钨磷镀层的耐蚀性。     

锌与小儿神经系统及代谢性疾病

综述了锌在小儿神经系统疾病和内分泌代谢性疾病中的作用及临床意义，尤其是对癫痫的发病起重要作用，大量资料证明高锌与癫痫发作有关，其血锌值明显高于健康儿童，因此在治疗中不要轻易补锌。还综述了锌与智能发育障碍、生长发育障碍、多动症、胎儿畸形、遗传性感音神经性聋等疾病的关系及在治疗糖尿病、肝豆状核变性等内分泌和代谢性疾病时要注意维持锌的正常动态平衡。     

微波辐照制备无皂阳离子PMMA胶乳粒子

在微波辐照条件下 ,用偶氮二异丁基脒盐酸盐 (AIBA)引发甲基丙烯酸甲酯的均聚 ,制得窄分散的无皂阳离子胶乳粒子 .讨论了引发剂的浓度、单体的浓度、离子强度等对粒子大小、分散性和乳液稳定性的影响 .对微波辐照和水浴加热进行比较 ,发现微波辐照反应速度快、反应无恒速阶段 ,所得粒子的粒径小 ,粒子数目多 ,这为通过改变反应条件制备适宜的窄分散的胶乳粒子提供了一条途径 .