Inactivation of Saccharomyces cerevisiae by ultrasonic irradiation

We have investigated the inactivation of Saccharomyces cerevisiae (yeast cells) by ultrasonic irradiation. The amplitude on the vibration face contacting the sample solution was used as an indication of the ultrasonic power intensity. The effects of the amplitude on the vibration face and the initial cell numbers on the sonolytic inactivation of yeast cells have been investigated using a horn-type sonicator (27.5 kHz). The inactivation of the yeast cells by ultrasonic irradiation shows pseudo first-order behavior. The inactivation rate constant varied from 0.0007 to 0.145 s(-1) when the amplitude on the vibration face was in the range of 1-7 microm(p-p). The change in the inactivation rate constant as a function of the amplitude on the vibration face was similar to that of the OH radical formation rate under the same conditions. The threshold of this sonicator was 3 microm(p-p) with the amplitude on the vibration face. The initial cell numbers (from 10(2) to 10(5) mL(-1)) had an influence on the inactivation of the yeast cells by ultrasonic irradiation. The inactivation rate constants varied from 0.023 to 6.4 x 10(-3) s(-1), and the inactivation by ultrasonic irradiation was fastest at the lowest initial cell numbers. In a squeeze-film-type sonicator (26.6 kHz), 90% inactivation of the yeast cells was achieved by ultrasonic irradiation for 60 min.     

Biomolecule immobilization techniques for bioactive paper fabrication

Research into paper-based sensors or functional materials that can perform analytical functions with active recognition capabilities is rapidly expanding, and significant research effort has been made into the design and fabrication of bioactive paper at the biosensor level to detect potential health hazards. A key step in the fabrication of bioactive paper is the design of the experimental and operational procedures for the immobilization of biomolecules such as antibodies, enzymes, phages, cells, proteins, synthetic polymers and DNA aptamers on a suitably prepared paper membrane. The immobilization methods are concisely categorized into physical absorption, bioactive ink entrapment, bioaffinity attachment and covalent chemical bonding immobilization. Each method has individual immobilization characteristics. Although every biomolecule–paper combination has to be optimized before use, the bioactive ink entrapment method is the most commonly used approach owing to its general applicability and biocompatibility. Currently, there are four common applications of bioactive paper: (1) paper-based bioassay or paper-based analytical devices for sample conditioning; (2) counterfeiting and countertempering in the packaging and construction industries; (3) pathogen detection for food and water quality monitoring; and (4) deactivation of pathogenic bacteria using antimicrobial paper. This article reviews and compares the different biomolecule immobilization techniques and discusses current trends. Current, emerging and future applications of bioactive paper are also discussed.     

A facile approach for the delivery of inorganic nanoparticles into the brain by passing through the blood-brain barrier (BBB)

This study provides an easy and simple method to obtain inorganic nanoparticles that can penetrate the blood-brain barrier, the heavily guarded system in the brain, via cross-linked serum albumin surface coatings. Their intact BBB permeability was confirmed in both in vitro and in vivo tests.     

Manganese carbonyls bearing tripodal polypyridine ligands as photoactive carbon monoxide-releasing molecules

The recently discovered cytoprotective action of CO has raised interest in exogenous CO-releasing materials (CORMs) such as metal carbonyls (CO complexes of transition metals). To achieve control on CO delivery with metal carbonyls, we synthesized and characterized three Mn(I) carbonyls, namely, [Mn(tpa)(CO)(3)]ClO(4) [1, where tpa = tris(2-pyridyl)amine], [Mn(dpa)(CO)(3)]Br [2, where dpa = N,N-bis(2-pyridylmethyl)amine], and [Mn(pqa)(CO)(3)]ClO(4) [3, where pqa = (2-pyridylmethyl)(2-quinolylmethyl)amine], by crystallography and various spectroscopic techniques. All three carbonyls are sensitive to light and release CO when illuminated with low-power UV (5-10 mW) and visible (λ > 350 nm, ~100 mW) light. The sensitivity of 1-3 to light has been assessed with respect to the number of pyridine groups in their ligand frames. When a pyridine ring is replaced with quinoline, extended conjugation in the ligand frame increases the absorptivity and makes the resulting carbonyl 3 more sensitive to visible light. These photosensitive CORMs (photoCORMs) have been employed to deliver CO to myoglobin under the control of light. The superior stability of 3 in aqueous media makes it a photoCORM suitable for inducing vasorelaxation in mouse aortic muscle rings.     

Anisotropic optical properties in electroluminescent conjugated polymers based on grazing angle photoluminescence measurements

Grazing angle photoluminescence (GPL) originates from a waveguided light emitted at grazing angle to the substrate due to the total internal reflections, and the light emission is polarized with enhanced intensity at selective mode wavelength. GPL measurements reveal the optical anisotropy of luminescent conjugated polymers, in particular, the alignment of emitting dipoles from which emission occurs, in contrast to spectroscopic ellipsometry measurements that give the anisotropy in the absorption. Based on the GPL emission intensities and spectra, we investigate the anisotropic optical properties in electroluminescent poly(9,9'-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) conjugated polymer thin films of different molecular weights (M(n) = 9-255 kg/mol), both in the pristine and annealed states. The optical anisotropy in F8BT films generally increases with molecular weight, suggesting that higher molecular weight polymers with longer chains are more likely to lie in-plane to the substrate. Upon annealing, high molecular weight F8BT films show even a higher degree of anisotropy, in contrast to low molecular weight F8BT films that become more isotropic. Annealing causes the polymer chains to rearrange and adopt a configuration in which the interchain exciton migration to better ordered low energy (LE) emissive states is strongly suppressed. We observe that the emissive states in F8BT are strongly affected by the local polymer chain arrangement, producing the less ordered high energy (HE) emissive states near the substrate interface where there is a higher degree of chain disorder and the LE states in the bulk of the film. When spin coated onto a quartz substrate precoated with a poly(styrenesulfonate)-doped poly(3,4-ethylenedioxythiophene) (PEDOT:PSS) layer, films of F8BT show severe luminescence quenching near the PEDOT:PSS interface for both the LE and HE emissive states, but a selective quenching of the LE states in the bulk of the film. These observations have important implications for fabricating efficient electronic devices using conjugated polymers as an active material, since the performance of these devices will strongly depend on anisotropic optical properties of electroluminescent conjugated polymers.     

A Lyapunov-type condition for robust feedback stability of delay control systems

^** Email: spyung{at}hku.hk In this paper, we show that a delay control system can be robustlystabilized by certain closed-loop feedback if a Lyapunov-typecondition is fulfilled.     

Peptide Amphiphile Mediated Co-assembly for Nanoplasmonic Sensing

Aromatic interactions are commonly involved in the assembly of naturally occurring building blocks, and these interactions can be replicated in an artificial setting to produce functional materials. Here we describe a colorimetric biosensor using co-assembly experiments with plasmonic gold and surfactant-like peptides (SLPs) spanning a wide range of aromatic residues, polar stretches, and interfacial affinities. The SLPs programmed in DDD−(ZZ)_x−FFPC self-assemble into higher-order structures in response to a protease and subsequently modulate the colloidal dispersity of gold leading to a colorimetric readout. Results show the strong aggregation propensity of the FFPC tail without polar DDD head. The SLPs were specific to the target protease, i.e., M^pro, a biomarker for SARS-CoV-2. This system is a simple and visual tool that senses M^pro in phosphate buffer, exhaled breath condensate, and saliva with detection limits of 15.7, 20.8, and 26.1 nM, respectively. These results may have value in designing other protease testing methods.     

Targeted Protein Upregulation of STING for Boosting the Efficacy of Immunotherapy

Modulating target proteins via the ubiquitin-proteasome system has recently expanded the scope of pharmacological inventions. Stimulator of interferon genes (STING) is an auspicious target for immunotherapy. Seminal studies envisioned the importance of STING as well as the utility of its agonists in immunotherapy outcomes. Herein, we suggest UPPRIS (upregulation of target proteins by protein-protein interaction strategy) to pharmacologically increase cellular STING levels for improved immunotherapy. We discovered the small molecule SB24011 that inhibits STING-TRIM29 E3 ligase interaction, thus blocking TRIM29-induced degradation of STING. SB24011 enhanced STING immunity by upregulating STING protein levels, which robustly potentiated the immunotherapy efficacy of STING agonist and anti-PD-1 antibody via systemic anticancer immunity. Overall, we demonstrated that targeted protein upregulation of STING can be a promising approach for immuno-oncology.