Some addition reactions of bisgermavinylidene

The reaction of bisgermavinylidene [(Me₃SiN?PPh₂)₂C?Ge→Ge?C(PPh₂?NSiMe₃)₂] ( 1 ) with AdNCO (Ad = Adamantyl) afforded the [2 + 2] cycloadditon product [(Me₃SiN?PPh₂)₂CGeC(O) NAd] ( 2 ). Similar reaction of 1 with Ph₃SiOH in tetrahydrofuran (THF) yielded the base‐stabilized germanium(II) triphenylsiloxide [H₂C(PPh₂?NSiMe₃)₂Ge(OSiPh₃)₂] ( 3 ). The results suggested that reactive germavinylidene may exist in solution and is capable of forming addition reaction products. The X‐ray structures of 2 and 3 were determined. Copyright © 2007 John Wiley & Sons, Ltd.     

On the maximum spreading diameter of impacting droplets on well-prepared solid surfaces

This paper presents a systematic study of liquid droplet impact on three polymer surfaces: poly(methyl methacrylate), poly(methyl methacrylate/n-butyl methacrylate), and poly(n-butyl methacrylate). Changing from one surface to the next represents an incremental variation in solid surface tensions of 5-6 mJ/m2. These surfaces were prepared through careful experimental procedures that were used for the determination of solid surface tensions from contact angles. Our data for the maximum spreading diameter of water and formamide impacting on these surfaces were compared with those predicted from literature models. Of the models selected, we modified the model of Pasandideh-Fard et al. [Phys. Fluids 1996, 8, 650] and the results yielded a least error of only 5.09 +/- 5.05% in the determination of the maximum spreading diameter. The improved model was also compared with literature data, and good agreement was found. Of course, any such comparisons would rely on accurate experimental impact dynamics data on carefully prepared surfaces.     

Defects in ZnO nanorods prepared by a hydrothermal method

ZnO nanorod arrays were fabricated using a hydrothermal method. The nanorods were studied by scanning electron microscopy, photoluminescence (PL), time-resolved PL, X-ray photoelectron spectroscopy, and positron annihilation spectroscopy before and after annealing in different environments and at different temperatures. Annealing atmosphere and temperature had significant effects on the PL spectrum, while in all cases the positron diffusion length and PL decay times were increased. We found that, while the defect emission can be significantly reduced by annealing at 200 degrees C, the rods still have large defect concentrations as confirmed by their low positron diffusion length and short PL decay time constants.     

Lab-in-cell based on spontaneous amino-yne click polymerization

Unnatural reaction in the living cells is a powerful tool for biological research. However, the polymerization inside cells is rarely reported. In this work, a lab-in-cell is illustrated based on our developed spontaneous amino-yne click polymerization. Carbonyl group activated terminal diyne can spontaneously polymerize with tetraphenylethene(TPE)-containing primary diamine inside cells, and polymer with weight-average molecular weight of 7,300 was yielded. By utilizing this in vivo amino-yne click polymerization and taking advantage of the aggregation-induced emission feature of TPE, a "turn-on" cell imaging was realized,and in-situ killing of cells was also acquired by destroying the structures of actin and tubulin, which cannot be realized by preprepared polymer. This strategy provides a useful platform and holds great promise in biochemistry and therapy applications.     

Magnetoresistance anisotropy of a one-dimensional superconducting niobium strip

We investigated confinement effects on the resistive anisotropy of a superconducting niobium strip with a rectangular cross section. When its transverse dimensions are comparable to the superconducting coherence length, the angle dependent magnetoresistances at a fixed temperature can be scaled as R(theta,H) = R(H/Hctheta) where Hctheta =Hc0(cos2theta + gamma(-2)sin2theta)(-1/2) is the angular dependent critical field, gamma is the width to thickness ratio, and Hc0 is the critical field in the thickness direction at theta=0 degrees . The results can be understood in terms of the anisotropic diamagnetic energy for a given field in a one-dimensional superconductor.     

Experimental and theoretical investigation of galloping of transversely inclined slender prisms

Galloping is characterized by large and periodical oscillations which may lead to collapse of slender structures. This study is the first attempt of a comprehensive experimental and theoretical investigation of galloping of transversely inclined prisms. A modified quasi-steady model is proposed with a constant term to estimate the galloping of a transversely inclined prism, which is later experimentally investigated by conducting a static Synchronous Multi-Pressure Sensing System (SMPSS) test and an aeroelastic test in a boundary layer wind tunnel. The galloping responses of the prisms were measured in the aeroelastic test, while the aerodynamic force coefficients were determined from the SMPSS test. These experimental results were subsequently utilized to validate the quasi-steady model. Based on the proposed model, the galloping responses of the prisms were predicted and compared with the experimental results. The experimentally measured and theoretically predicted galloping responses are discussed with respect to aerodynamic damping ratios, onset galloping wind speeds, distributed pressure coefficients, point pressure spectra and vortex shedding frequencies. Interesting findings are summarized.     

Exploring the undrained cyclic behavior of methane-hydrate-bearing sediments using CFD–DEM

Based on the mechanical experimental results of methane hydrate (MH), a bond contact model considering the rate-dependency of MH is proposed. A CFD–DEM scheme considering fluid compressibility is used to simulate a series of undrained cyclic shear tests of numerical methane-hydrate-bearing sediment (MHBS) samples. The dynamic behavior, including stress–strain relationship, dynamic shear modulus, and damping ratio, is investigated. In addition, the force chains, contact fabric and averaged pure rotation rate (APR) are examined to investigate the relationships between micromechanical variables and macromechanical responses in the DEM MH samples. The effects of temperature, confining pressure and MH saturation are also analyzed. Due to the micro-structural strengthening by the MH bonds, no obvious change in microscopic quantities is observed, and the samples remain at the elastic stage under the applied low-shear stress level. When confining pressure and MH saturation increase, the dynamic elastic modulus increases, while the damping ratio decreases. An increasing temperature (leading to weakening of MH bonds) can lower the dynamic elastic modulus, but has almost no impact on the damping ratio. On the contrary, an increasing cyclic shear stress level lowers the damping ratio, but has almost no effect on the dynamic elastic modulus.     

In Situ Monitoring of RAFT Polymerization by Tetraphenylethylene‐Containing Agents with Aggregation‐Induced Emission Characteristics

A facile and efficient approach is demonstrated to visualize the polymerization in situ. A group of tetraphenylethylene (TPE)‐containing dithiocarbamates were synthesized and screened as agents for reversible addition fragmentation chain transfer (RAFT) polymerizations. The spatial‐temporal control characteristics of photochemistry enabled the RAFT polymerizations to be ON and OFF on demand under alternating visible light irradiation. The emission of TPE is sensitive to the local viscosity change owing to its aggregation‐induced emission characteristic. Quantitative information could be easily acquired by the naked eye without destroying the reaction system. Furthermore, the versatility of such a technique was well demonstrated by 12 different polymerization systems. The present approach thus demonstrated a powerful platform for understanding the controlled living radical polymerization process.     

Cell adhesion properties on photochemically functionalized diamond

The biocompatibility of diamond was investigated with a view toward correlating surface chemistry and topography with cellular adhesion and growth. The adhesion properties of normal human dermal fibroblast (NHDF) cells on microcrystalline and ultrananocrystalline diamond (UNCD) surfaces were measured using atomic force microscopy. Cell adhesion forces increased by several times on the hydrogenated diamond surfaces after UV irradiation of the surfaces in air or after functionalization with undecylenic acid. A direct correlation between initial cell adhesion forces and the subsequent cell growth was observed. Cell adhesion forces were observed to be strongest on UV-treated UNCD, and cell growth experiments showed that UNCD was intrinsically more biocompatible than microcrystalline diamond surfaces. The surface carboxylic acid groups on the functionalized diamond surface provide tethering sites for laminin to support the growth of neuron cells. Finally, using capillary injection, a surface gradient of polyethylene glycol could be assembled on top of the diamond surface for the construction of a cell gradient.