A light-driven rotaxane molecular shuttle with dual fluorescence addresses

[reaction: see text] A molecular shuttle containing an alpha-CD macrocycle, an azobenzene unit, and two different fluorescent naphthalimide units was synthesized. The cis-trans photoisomerization of the azobenzene unit resulted in the motion of the CD macrocycle on the track. Because of the easy regulation and full reversibility of the fluorescence change of the two stopper units, the molecular shuttle could be used as a molecular storage medium or switch with all-optical inputs and outputs.     

Preparation of a piezoelectric immunosensor for the detection of Salmonella paratyphi A by immobilization of antibodies on electropolymerized films

 To obtain new coatings for the preparation of piezoelectric immunosensors, the anodic polymerization of o-aminophenol (oAP), o-phenylenediamine (oPD) and m-phenylenediamine (mPD) onto a gold-plated crystal has been studied. The possibility of immobilizing an antibody (anti-S. paratyphi A) onto the crystal via the electropolymerized films was investigated. The poly-mPD film gave the best results for immobilizing the antibody. With antibodies crosslinked on the poly-mPD film, a piezoelectric immuno-assay for the detection of S. paratyphi A was proposed. The shift (ΔF=F_20s−F_400s, Hz) between the frequency at 20 s after the addition of sample (F_20s), and that of 400 s (F_400s) was used to construct a calibration graph, and shortening of the assay time was achieved. The S. paratyphi A concentration in the range of 10^5–10⁹ cells/ml can be measured by this method. Received: 9 May 1996/Revised: 6 September 1996/Accepted: 19 September 1996     

BaCe1—xRExO3—0.5x的溶胶—凝胶法合成及离子导电性

用溶胶－凝胶法合成了系列钙钛矿结构的ＢａＣｅ１－ｘＲＥｘＯ３－０．５ｘ（ＲＥ＝Ｌａ，Ｎｄ，Ｓｍ，Ｅｕ，Ｇｄ，Ｄｙ，Ｈｏ，Ｅｒ和Ｙ）复合氧化物，通过ＸＲＤ和热分析对样品结构及生成过程进行了研究．测定了不同温度下样品的交流阻抗谱，讨论了稀土离子掺杂对ＢａＣｅＯ３电性质的影响．溶胶－凝胶法比固相反应法合成温度降低了６００～８００℃，稀土掺杂使ＢａＣｅＯ３离子导电率提高了１０～４０倍．     

Effect of water in the precursor solution on the catalytic property of LaMnAl11O19 high temperature combustion catalyst

Manganese-substituted lanthanum hexaaluminates were prepared by the sol-gel method. The effect of water content on the catalyst preparation was examined. Large water content caused a rapid decrease in the surface area. When the R (R is the mole ratio of H₂O/ Al(OC₃H₇)₃) is equal to 1.5, the catalyst retains a specific surface area of 13.5 m² g⁻¹ and shows higher activity in CH₄ combustion.     

Crystal structure of potassium tetramethylammonium hexacyanocobaltate(III) trihydrate: K3(Me4N)3[Co(CN)6]2·3H2O

The structure of K₃(Me₄N)₃[Co(CN)₆]₂·3H₂O has been determined from three-dimensional X-ray diffraction data. The unit cell is formed by parallel layers of cobalt octahedra [CoC₆] and potassium octahedra, [K(1)N₅O(1)], separated byc/2. In each layer both types of octahedra are located alternatively. The [MeN₄]⁺ tetrahedra are located in the cavities between the two layers of octahedra. The crystal structure of this compound is the first example of its type. TMC 2483     

Square-wave voltammetric determination of cefoperazone in a bacterial culture,pharmaceutical drug,milk, and urine

Use of square-wave voltammetry (SWV) for determination of cefoperazone (CFPZ) in some buffers, bacterial culture, urine, and milk is described. CFPZ provides a specific voltammetric signal which is affected by pH and solution components. Determination of CFPZ in Britton–Robinson buffer, pH 4.4, is sensitive with a low detection limit (about 0.5 nmol L^–1). In a more complex medium (bacterial 2YT medium, pH 7.2) the detection limit was approximately 1.5 mol L^–1. We provide evidence that SWV is a suitable and quick method for CFPZ determination in a culture of living bacteria without separation of biomass. We have found big differences between methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-sensitive Staphylococcus aureus (MSSA) in cultivation in the presence of CFPZ, depending on time. When CFPZ is cleaved by penicillinase, a new SWV peak b appears at more positive potentials. This peak rises both with increasing concentration of enzyme and with cleavage time while the original CFPZ peak is simultaneously decreasing. We determined the concentration of CFPZ in the drug Pathozone by the standard addition method and achieved good agreement with the declared value of CFPZ in the drug. With a simple pretreatment procedure it is possible to determine CFPZ in milk; for urine no pretreatment was required. Using SWV we could detect CFPZ concentrations as low as 500 nmol L^–1 in bovine milk and human urine.     

Lu2O3对球形Ni(OH)2高温充放电性能的影响

为了改善镍电极的高温充电效率，采用机械混合的方式将球形Ni(OH)2与不同比例的Lu2O3混合后制成粘结式镍正极。充放电测试、循环伏安和XRD等实验结果表明，掺杂Lu2O3后镍电极的析氧过电位明显提高，高温充电效率得到了很大改善，在充电后的电极中β-NiOOH生成；而且Lu2O3的掺杂比例对镍电极的高温性能在不同的充放电倍率下有不同程度的影响，3．5％是最好的掺杂比例，掺杂对高温小电流充电效率的改善作用要大于高温大电流充电。     

Ultrafast collective dynamics in the charge-density-wave conductor K(0.3)MoO(3)

Low-energy coherent charge-density wave excitations are investigated in blue bronze (K(0.3)MoO(3)) and red bronze (K(0.33)MoO(3)) by femtosecond pump-probe spectroscopy. A linear gapless, acousticlike dispersion relation is observed for the transverse phasons with a pronounced anisotropy in K(0.33)MoO(3). The amplitude mode exhibits a weak (opticlike) dispersion relation with a frequency of 1.67 THz at 30 K. Our results show for the first time that the time-resolved optical technique provides momentum resolution of collective excitations in strongly correlated electron systems.     

N-取代乙醇胺对4-氟-1-酰基苯的选择性胺化反应

研究了4-氟-1-酰基苯和N-取代乙醇胺在酰胺类溶剂或不加溶剂中反应, 在不需要金属催化剂和另外加碱的条件下选择性地得到胺化产物, 实验操作简单, 符合S_NAr取代机理. 一系列羟乙基胺基酰基苯产物均经过元素分析(HRMS), IR, MS和NMR的测定.     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.