Multiscale Weighted Permutation Entropy Analysis of Schizophrenia Magnetoencephalograms

Schizophrenia is a neuropsychiatric disease that affects the nonlinear dynamics of brain activity. The primary objective of this study was to explore the complexity of magnetoencephalograms (MEG) in patients with schizophrenia. We combined a multiscale method and weighted permutation entropy to characterize MEG signals from 19 schizophrenia patients and 16 healthy controls. When the scale was larger than 42, the MEG signals of schizophrenia patients were significantly more complex than those of healthy controls (p<0.004). The difference in complexity between patients with schizophrenia and the controls was strongest in the frontal and occipital areas (p<0.001), and there was almost no difference in the central area. In addition, the results showed that the dynamic range of MEG complexity is wider in healthy individuals than in people with schizophrenia. Overall, the multiscale weighted permutation entropy method reliably quantified the complexity of MEG from schizophrenia patients, contributing to the development of potential magnetoencephalographic biomarkers for schizophrenia.     

Photoluminescence linewidth broadening due to alloy/thickness fluctuation of CdxZn1 − xSe/ZnSe triple quantum wells

Photoluminescence (PL) linewidth broadening of Cd_xZn_{1 − x}Se/ZnSe triple quantum wells, grown on GaAs substrates by molecular beam epitaxy (MBE), has been investigated. Various quantum well (QW) samples have been prepared with different QW thickness and composition (Cd-composition). Measured and calculated PL linewidth are compared. Both composition and thickness fluctuations are considered for the calculation with the parameters such as the volume of exciton, nominal thickness and composition of QWs. Surface roughness measured by atomic force microscopy (AFM) is used to estimate the interface roughness. Results show that when Cd-composition increases additional linewidth broadening due to Zn/Cd interdiffusion is enhanced.     

自聚焦透镜高效批量加工的双面研磨抛光法研究

依据双面研磨抛光原理,提出了加工自聚焦透镜平面和斜面辅助工装设计.从工艺技术特点和生产实际过程等方面对设计的工装使用情况进行分析验证.多次大批量加工实践证明,该辅助工装的设计完全满足了自聚焦透镜高效批量加工技术要求,简化整个生产线工艺,减少工艺流程时间,降低材辅料的消耗成本,从而验证了双面研磨抛光法是一种实用的加工自聚焦透镜的新方法.     

太湖典型湖区水体溶解有机质的光谱学特征

应用荧光光谱、紫外光谱及多种紫外参数等光谱学手段对太湖水体溶解有机质(DOM)进行分析测定,探讨太湖典型湖区水体中DOM的来源及其影响因素。结果表明:不同湖区水体DOM组成特性呈现出一定的区域特征,位于入湖河流的T1点和T2点所代表的竺山湾湖区,结构复杂的大分子物质和腐殖质类物质含量较多,这些区域受多重来源包括生物来源、陆源及生产生活污水的影响较大;以T3为代表的梅梁湾湖区、T4为代表的贡湖湾湖区和T5所处的湖心区其DOM复杂化程度相对较低;而T6点代表的东太湖湖区,因受外界环境的影响较小,以结构简单的类蛋白物质含量居多。     

第一性原理研究Fe掺杂SnO2材料的光电性质

采用基于第一性原理的线性缀加平面波(FP-LAPW)方法,研究Fe掺杂SnO₂材料电子结构和光学性质,包括电子态密度、能带结构、介电函数和其他一些光学图谱. 研究结果表明,掺Fe后材料均属于直接跃迁半导体,且呈现半金属性;随掺杂浓度增加,费米能级进入价带,带隙逐渐减小,Fe原子之间耦合作用增强;通过掺杂能够在一定程度上改变成键性质,使其具有金属键性质. 光学谱线(吸收谱、消光系数等)与介电函数虚部谱线相对应,均发生蓝移,各峰值与电子跃迁吸收有关,从理论上指出光学性质和电子结构的内在联系. 关键词： 能带结构 态密度 光学性质 介电函数     

Development of novel flexible black silicon

We report a new type of black silicon: flexible black silicon. A silicon-on-insulator (SOI) wafer is irradiated by automatically scanning a femtosecond laser and then split by etching out the SOI silica middle layer. Large-area, uniform micro spikes on the surface of a very thin flexible silicon layer are obtained. The black silicon shows good flexibility and optical properties. The absorption spectrum of the flexible black silicon is as high as 97% in the visible and insensitive to the change of the incident angle of the light, which makes it a potential good candidate as an absorber for the solar-thermo generator.     

Diode both ends pumped two crystals Tm:YLF laser

In this paper, we report two crystals Tm:YLF laser pumped by a fiber coupled diode laser with total power of 180 W at 792 nm. When the incident power reached up to 117.0 and 37.3 W of the emission wave-length at 1.91 μm was achieved. Through linear fit, the corresponding slope efficiency of 38.5%, optical-to-optical conversion efficiency of 31.9% and the beam quality factor of M ² ∼ 1.1 were obtained, indicating nearly diffraction limited beam propagation. To our best knowledge, this is the best beam quality among the reported paper results under the similar experiments.     

钠在空位石墨烯上吸附性能的研究

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯和空位石墨烯吸附钠原子的电荷密度、吸附能、态密度和储存量.结果表明,在两种石墨烯中,钠原子的最佳吸附位置都为H位.空位石墨烯对钠原子的吸附能是-2. 46 eV,约为本征石墨烯对钠原子吸附能的3. 4倍;钠原子与空位石墨烯中的碳原子发生轨道杂化,而与本征石墨烯没发生轨道杂化现象.存在一个空位的石墨烯能够吸附5个钠原子,与本征石墨烯相比显著提高.因此,空位石墨烯有望成为一种潜在的储钠材料.     

Study on a new green phosphor Ca12Al14O32Cl2: Tb3+ derived from Tb-doped Ca-Al layered double hydroxide

A new green phosphor Ca₁₂Al₁₄O₃₂Cl₂: Tb³⁺ derived from Tb-doped Ca-Al layered double hydroxide (Tb-doped CaAl-LDH) was prepared through phase transition route. The X-ray diffraction measurement results revealed that the Tb-doped CaAl-LDH transformed into Ca₁₂Al₁₄O₃₂Cl₂:Tb³⁺ phase at 600 °C. With temperature varying from 600, 800–1000 °C, the crystallinity of the Ca₁₂Al₁₄O₃₂Cl₂:Tb³⁺ phase gradually improved. Compositional analyses suggested the chemical formula of the Ca₁₂Al₁₄O₃₂Cl₂:Tb³⁺ phase estimated to be Ca₁₂Al_13.52Tb_0.48O₃₂Cl₂. The Ca₁₂Al_13.52Tb_0.48O₃₂Cl₂ phase can be efficiently excited by near ultraviolet light and show strong green emissions attributed to ⁵D₄→⁷F_J (J = 5, 6) transition of Tb³⁺. The present Ca₁₂Al_13.52Tb_0.48O₃₂Cl₂ may be a promising candidate for green phosphor applied in LED.     

Magnetic M<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>@N-C as heterogeneous catalysts for the catalytic oxidation of aniline solution with sulfate radicals

Metal nanoparticles have been combined with magnet metal–organic frameworks (MOFs) to afford new materials that demonstrate an efficient catalytic degradation, high stability, and excellent reusability in areas of catalysis because of their exceptionally high surface areas and structural diversity. Magnetic M _x O _y @N-C (M = Fe, Co, Mn) nanocrystals were formed on nitrogen-doped carbon surface by using 8-hydroxyquinoline as a C/N precursor. The Co@N-C, MnO@N-C, and Fe/Fe₂O₃@N-C catalysts were characterized by X-ray diffraction (XRD), Raman, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), N₂ adsorption/desorption, and X-ray photoelectron spectroscopy (XPS). The catalytic performances of catalysts were thoroughly investigated in the oxidation of aniline solution based on sulfate radicals (SO₄ ^?.) toward Fenton-like reaction. Magnetic M _x O _y @N-C exhibits an unexpectedly high catalytic activity in the degradation of aniline in water. A high magnetic M _x O _y @N-C catalytic activity was observed after the evaluation by aniline degradation in water. Aniline degradation was found to follow the first-order kinetics, and as a result, various metals significantly affected the structures and performances of the catalysts, and their catalytic activity followed the order of Co > Mn > Fe. The nanoparticles displayed good magnetic separation under the magnetic field.

Open image in new window

Graphical Abstract ?