Nanopore sensing system for high-throughput single molecular analysis

正Nanopore technique enables a sensitive, label free, low cost and high throughput method for single-molecule analysis[1–4]. Usually, the nanopore is fabricated on an insulating membrane with electrolyte solution in two sides, which can act as the only pathway for the ionic flow. When a single molecule enters the pore under the applied biased potential, it will temporarily block the ionic current flow through the nanopore. By analyzing the amplitude, duration, shape and frequency spectra of ionic current modulations, nanopore detection could provide the characteristics of the analytes     

Single-entity electrochemistry at confined sensing interfaces

Measurements at the single-entity level provide more precise diagnosis and understanding of basic biological and chemical processes. Recent advances in the chemical measurement provide a means for ultra-sensitive analysis. Confining the single analyte and electrons near the sensing interface can greatly enhance the sensitivity and selectivity. In this review, we summarize the recent progress in single-entity electrochemistry of single molecules, single particles, single cells and even brain analysis.The benefits of confining these entities to a compatible size sensing interface are exemplified. Finally, the opportunities and challenges of single entity electrochemistry are addressed.     

A multi-channel sensor based on 8-hydroxyquinoline ferrocenoate for probing Hg(II) ion

A new sensing molecule 8-hydroxyquinoline ferrocenoate (Fc-Q) which combines ferrocene and 8-hydroxyquinoline moieties was synthesized and applied as a multi-channel sensor for the detection of Hg²⁺ ion. Fc-Q can coordinate with Hg²⁺ to give colorimetric, fluorescent and electrochemical responses. Upon complexation with Hg²⁺ ion, the characteristic absorption peak is red-shifted (Δλ = 45 nm), the fluorescent intensity is quenched at 303 nm, and the oxidation peak is cathodic shifted (ΔE_1/2 = −149 mV). Quantitatively analyzed Hg²⁺ ions at the range of ppb level could be achieved by electrochemical response. For the practical application of sensing Hg²⁺ in real world water, Fc-Q modified screen-printed carbon electrodes were obtained for facile, sensitive, and on-site analysis of Hg²⁺.     

Fabrication of bimetallic microfluidic surface-enhanced Raman scattering sensors on paper by screen printing

Au–Ag bimetallic microfluidic, dumbbell-shaped, surface enhanced Raman scattering (SERS) sensors were fabricated on cellulose paper by screen printing. These printed sensors rely on a sample droplet injection zone, and a SERS detection zone at either end of the dumbbell motif, fabricated by printing silver nanoparticles (Ag NPs) and gold nanoparticles (Au NPs) successively with microscale precision. The microfluidic channel was patterned using an insulating ink to connect these two zones and form a hydrophobic circuit. Owing to capillary action of paper in the millimeter-sized channels, the sensor could enable self-filtering of fluids to remove suspended particles within wastewater without pumping. This sensor also allows sensitive SERS detection, due to advantageous combination of the strong surface enhancement of Ag NPs and excellent chemical stability of Au NPs. The SERS performance of the sensors was investigated by employing the probe rhodamine 6G, a limit of detection (LOD) of 1.1 × 10⁻¹³ M and an enhancement factor of 8.6 × 10⁶ could be achieved. Moreover, the dumbbell-shaped bimetallic sensors exhibited good stability with SERS performance being maintained over 14 weeks in air, and high reproducibility with less than 15% variation in spot-to-spot SERS intensity. Using these dumbbell-shaped bimetallic sensors, substituted aromatic pollutants in wastewater samples could be quantitatively analyzed, which demonstrated their excellent capability for rapid trace pollutant detection in wastewater samples in the field without pre-separation.     

Effect of ion adsorption on CEC separation of small molecules using hypercrosslinked porous polymer monolithic capillary columns

Both poly(styrene-co-vinylbenzyl chloride-co-divinylbenzene) and poly(4-methylstyrene-co-vinylbenzyl chloride-co-divinylbenzene) monolithic columns have been hypercrosslinked and for the first time used to achieve capillary electrochromatographic separations. Although these columns do not contain ionizable functionalities, electroosmotic flow was observed due to adsorption of ions from a buffer solution contained in the mobile phase on the surface of the hydrophobic polymer. An increase of more than one order of magnitude was observed with the use of both monolithic polymers. The hypercrosslinking reaction creates a large surface area thus enabling adsorption of a much larger number of ions. Alkylbenzenes were successfully separated using the hypercrosslinked monolithic columns.     

Recognizing the translocation signals of individual peptide-oligonucleotide conjugates using an α-hemolysin nanopore

Two peptide-oligonucleotide conjugates are studied using an α-hemolysin nanopore to investigate their structural properties at the single-molecule level.     

Anthraquinonyl glycoside facilitates the standardization of graphene electrodes for the impedance detection of lectins

Background

Construction of electrochemical impedance sensors by the self-assembly technique has become a promising strategy for the `label-free' detection of protein-ligand interactions. However, previous impedance sensors are devoid of an inherent electrochemical signal, which limits the standardization of the sensors for protein recognition in a reproducible manner.

Results

We designed and synthesized an anthraquinonyl glycoside (AG) where the anthraquinone (AQ) moiety can bind to the surface of a graphene-based working electrode while the glycoside serving as a ligand for lectin. By measuring the inherent voltammetric signal of AQ, the glycosides decorated on the working electrode could be simply quantified to obtain electrodes with a unified signal window. Subsequently, impedance analysis showed that the `standardized' electrodes gave a reproducible electrochemical response to a selective lectin with no signal variation in the presence of unselective proteins.

Conclusion

Anthraquinone-modified ligands could be used to facilitate the standardization of electrochemical impedance sensors for the reproducible, selective analysis of ligand-protein interactions.

     

Promoted Electrocatalytic Nitrogen Fixation in Fe-Ni Layered Double Hydroxide Arrays Coupled to Carbon Nanofibers: The Role of Phosphorus Doping

The key to bringing the electrocatalytic nitrogen fixation from conception to application lies in the development of high-efficiency, cost-effective electrocatalysts. Layered double hydroxides (LDHs), also known as hydrotalcites, are promising electrocatalysts for water splitting due to multiple metal centers and large surface areas. However, their activities in the electrocatalytic nitrogen fixation are unsatisfactory. Now, a simple and effective way of phosphorus doping is presented to regulate the charge distribution in LDHs, thus promoting the nitrogen adsorption and activation. The P-doped LDHs are further coupled to a self-supported, conductive matrix, that is, a carbon nanofibrous membrane, which prevents their aggregation as well as ensuring rapid charge transfer at the interface. By this strategy, decent ammonia yield (1.72×10⁻¹⁰ mol s⁻¹ cm⁻²) and Faradaic efficiency (23 %) are delivered at −0.5 V vs. RHE in 0.1 m Na₂SO₄.     

Simultaneous determination of four tanshinones in Salvia miltiorrhiza by pressurized liquid extraction and capillary electrochromatography

A pressurized liquid extraction (PLE) and CEC were developed for the simultaneous determination of four tanshinones (dihydrotanshinone I, cryptotanshinone, tanshinone I, and tanshinone IIA) in Salvia miltiorrhiza. High extraction efficiency (>98.5%) was achieved under the optimum PLE conditions. A good separation was obtained by using a Hypersil C18 capillary (3 microm, 100 microm/25 cm) with a mixture of 30 mM Tris-HCl (pH 8.5)-ACN (1:3, v/v) as BGE solution running at 20 kV and 20 degrees C within 12 min. All the calibration curves showed good linearity (r2 >0.9958) within test ranges. The developed method showed good repeatability for the quantification of four investigated components in S. miltiorrhiza with intra- and interday variations of less than 4.4 and 6.8%, respectively. The validated method was successfully applied to quantify four tanshinones in S. miltiorrhiza, which is helpful to control the quality of S. miltiorrhiza.     

Strain screening and sodium lactate effect on spiramycin production in <Emphasis Type="Italic">Streptomyces spiramyceticus</Emphasis>

Strain improvement and addition of sodium lactate to fermentation medium to enhance the productivity of spiramycin were performed. Of the sodium lactate tolerant mutants that were screened, one mutant, Streptomyces spiramyceticus 16-10-12, produced 23 % more spiramycin than the original strain, Streptomyces spiramyceticus 5-1. The effect of sodium lactate on spiramycin production with S. spiramyceticus 16-10-12 was studied. The titer was improved by 16.9 % with the addition of 15 g L^?1 sodium lactate in the fermentation medium at the beginning. The results from using the new process in a 15 L bioreactor showed that there were more precursors in fermentation broth with a sodium lactate tolerant mutant, and that these precursors were used more than with the original strain. After adding sodium lactate, the titer was increased by 23.4 %, because the flux to TCA circulation was increased, more precursors had been produced and the activities of Acyl-CoA synthetases, Acylphosphotransferases and Acylkinases in synthesis phase were also increased.