反应磁控溅射制备TiO2和Nb2O5混合光学薄膜

利用反应磁控溅射技术在BK-7基片上制备了二氧化钛和五氧化二铌均匀混合的光学薄膜.薄膜的内部微结构、表面形貌、化学成分比例以及光学性质等用X射线衍射、高分辨扫描电子显微镜、原子力显微镜、X射线光电子能谱和紫外可见近红外分光光度计进行研究;发现制备的薄膜为非晶结构,薄膜的表面平整、内部结构致密,不存在柱状结构或结晶颗粒的缺陷,TiO2与Nb2O5的成分比例大致是1∶1.54.从光学透射光谱计算的折射率和消光系数显示,在550 nm波长处的折射率为2.34,消光系数为2.0×10－4.结果表明制备的薄膜是TiO2和Nb2O5均匀混合的高质量光学薄膜.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

Measurements of the Decay KL-->e+ e- mu+ mu-

The KTeV experiment at Fermilab has isolated a total of 132 events from the rare decay K(L)-->e+ e- mu+ mu-, with an estimated background of 0.8 events. The branching ratio of this mode is determined to be [2.69+/-0.24(stat)+/-0.12(syst)]x10(-9), with a radiative cutoff of M(2)(ee mu mu)/M(2)(K)>0.95. The first measurement using this mode of the parameter alpha from the D'Ambrosio-Isidori-Portolès (DIP) model of the K(L)gamma*gamma* vertex yields a result of -1.59+/-0.37, consistent with values obtained from other decay modes. Because of the limited statistics, no sensitivity is found to the DIP parameter beta. We use this decay mode to set limits on CP and lepton violation.     

Molecular dynamics study of thermal stress and heat propagation in tungsten under thermal shock

Using molecular dynamics （MD） simulation, we study the thermal shock behavior of tungsten （W）, which has been used for the plasma facing material （PFM） of tokamaks. The thermo-elastic stress wave, corresponding to the collective displacement of atoms, is analyzed with the Lagrangian atomic stress method, of which the reliability is also analyzed. The stress wave velocity corresponds to the speed of sound in the material, which is not dependent on the thermal shock energy. The peak pressure of a normal stress wave increases with the increase of thermal shock energy. We analyze the temperature evolution of the thermal shock region according to the Fourier transformation. It can be seen that the “obvious” velocity of heat propagation is less than the velocity of the stress wave; further, that the thermo-elastic stress wave may contribute little to the transport of kinetic energy. The heat propagation can be described properly by the heat conduction equation. These results may be useful for understanding the process of the thermal shock of tungsten.     

机器视觉在激光干涉测量d31中的应用

提出一种应用机器视觉技术的激光干涉法, 可以研究压电材料的逆压电系数. 在传统干涉测量法中引入机器视觉实现干涉图像灰度最佳估计, 使用数字图像处理技术, 一方面应用降噪算法有效去除激光干涉图样中的噪声, 从而确定激光干涉场的光强分布, 另一方面将干涉图样的明暗变化进一步转化为可量度的灰度变化以提高测量分辨力. 通过合理设计算法, 该方法中对位移的理论测量分辨力可以提高达一个数量级, 为干涉光波长的1/1024, 因此在逆压电系数d₃₁ 的实验测量中可以有效提高分辨力. 关键词： 机器视觉 逆压电系数 双光束干涉 数字图像处理     

A novel method to measure dielectric properties of materials in terahertz spectroscopy

We present a simple method to obtain the optical and dielectric properties of samples without reference measurement in the reflection-type terahertz time-domain spectroscopy. The dielectric properties of the samples of silicon and gallium arsenide were examined. The optical and dielectric properties of the samples were measured through only simple configuration, without the misplacement error. The obtained dielectric functions of the samples in reflection geometry are in good agreement with that predicated by the theory. The main advantage of this method over other methods is its simplicity and accuracy and ease for application of the reflection systems with different incident angle.     

Optical characteristics of subwavelength metallic grating coupled porous film surface plasmon resonance sensor with high sensitivity

A high performance sub-wavelength metallic grating coupled surface plasmon resonance (SWMGCSPR) sensor with metal and porous composite layer is proposed. Rigorous coupled-wave analysis (RCWA) is conducted to prove the design feasibility, characterize the sensor's performance and determine geometric parameters of the structure, which is also employed to compute the electromagnetic (EM) field distributions at the resonant wavelengths. Parameters of sensing platform are optimized to achieve the best performance of the SPR sensor. Obtained results reveal that the proposed structure can excite SPR with negative diffraction order of SWMG. Both wavelength and angular sensitivities are greatly enhanced because surface plasmon wave (SPW) exhibits a large penetration depth which will enlarge the distance of interactions between SP and analytes. The detection sensitivities and quality parameters are estimated to be 700 nm/RIU and 509°/RIU with full width at half maximum (FWHM) less than 2.5 nm using the same optimized structure.     

Design and characterization of guided mode resonance filters with the improved structure for facile fabrication

In this study, a guided mode resonance filter with the improved structure for facile fabrication is designed; the properties of the designed filters are simulated by rigorous coupled wave analysis. It is found that the resonance wavelength and spectral linewidth are slightly increased with the increasing of the grating thickness, and seldom changed with the thickness of the grating filling factor, as the parameter error of the grating thickness and the grating filling factor are deviated from the designed value by ±10%, respectively, which are very favorable for simplifying preparation process of the GMR filter.     

模拟退火法在吸收薄膜的椭偏反演算法中的应用

将一种广泛用于求解复杂系统优化问题的技术－－模拟退火法－－用来求解椭偏反演方程。首先假设一个薄膜模型，计算出其相应的椭偏参数（Ψ，Δ）的值，在这个计算值的基础上加入不同标准偏差的高斯噪声；然后将加入噪声后的值（Ψm,Δm)作为模拟的测量数据，采用模拟退火算法进行求解，验证得知这种方法求得的薄膜参数很接近于假设的薄膜模型参数的真值，与其他文献的报道结果一致，而且在扩大搜寻范围时，仍然可以得到准确解，从而证明了该方法的可行性以及有效性。