变光外差为电外差的双频激光探测

演示一种双频激光位移探测系统,阐述光载波激光雷达的概念。由单块非平面环形腔固体激光器和声光调制器产生100MHz载波频率的双频激光束,作为探测光束,经过光路收发系统,探测位于电动导轨上目标的位移变化,信号处理部分采用高速光电探测器响应后信号的电子外差解调方式,位移量的获得通过高频锁相放大器解算参考光束与信号光束的相位差并计算获得。通过双频激光把光学外差探测变为了电子外差探测,系统重复误差小于3%。系统在利用无线电雷达信号处理方式的同时,保留了激光探测的优点,位移测量系统具有良好的重复性。     

In气氛下晶体生长对Mg掺杂p-Al_xGa_(1-x)N激活能的影响

Ⅲ-Ⅴ族氮化物宽禁带半导体材料体系中,普通方法生长的p型外延层电导率一般都很低,成为了制约器件性能提高的瓶颈。在p-AlxGa1-xN材料中,Mg受主的激活能较大,并且随Al组份增加而增大。通过在p-AlxGa1-xN材料生长过程中引入三甲基铟(TMIn),发现能有效地降低AlxGa1-xN材料中受主态的激活能。为研究不同In气氛下生长的p-AlxGa1-xN材料的性质,在使用相同二茂基镁(CP2Mg)的情况下,改变TMIn流量,生长了A,B,C和D四块样品。X射线衍射(XRD)组份分析表明:在1100℃下生长AlxGa1-xN外延层时,In的引入不会影响晶体组份。利用变温霍尔(Hall)测试研究了p-AlxGa1-xN材料中受主的激活能,结果表明:In气氛下生长的外延层相比无In气氛下生长的外延层,受主激活能明显降低,电导率显著提高。采用这种方法改进深紫外发光二极管(LED)的p-AlxGa1-xN层后,LED器件性能明显提高。     

高压静电场促进植物生长技术的研究

高压静电场促进植物生长技术源于自然又高于自然 ,它包括静电种子处理和静电场生长环境等技术 .文章论述了该技术的实施方法 ,并报道了已经取得的初步成果 .     

近红外光谱监测体外循环手术中脑组织氧合状况的研究

体外循环手术中,为防止因脑氧供需失衡导致脑缺氧,就要实时监测患者局部脑组织的氧合状况,以根据其变化调整生理参数或采取应急手段。用该研究小组自行研制的近红外仪器(使用一个双波长的近红外光源和两个近红外检测器)监测心脏手术中患者的脑氧,可以求出局部脑组织血红蛋白浓度的变化,并根据稳态空间分辨光谱(SRS)算法求出局部脑组织的氧饱和度(rSO₂)。体外循环中用监护仪监测患者的混合静脉血氧饱和度(SvO₂)等生理参数。测得的血红蛋白浓度变化容易受到干扰,而rSO₂的抗干扰性能较好。rSO₂在整个手术过程中都可以监测到,而SvO₂只能在体外循环过程中监测到。多数患者rSO₂和SvO₂存在正向相关性,但二者的相关系数并不很高。这是因为SvO₂是大静脉的血氧饱和度,而测得的rSO₂反映局部脑组织的氧合状况,二者的生理意义不同。实验结果表明,体外循环手术中rSO₂可以反映患者脑组织氧合状况的变化,而仅仅监测SvO₂是不够的。     

A Novel Synthesis of 2-Alkylthiobenzothiazoles and 2-Alkylthiobenzoxazoles

Abstract

3H-Benzothiazole-2-thione and 3H-benzoxazole-2-thione were selectively S-alkylated by use of O-alkylisoureas as the alkylating reagents. The reactions could be performed under mild reaction conditions in short reaction times, and high yields were obtained using O-primary-alkylisoureas, whereas low yields were obtained with sec- and tert-alkylisoureas.     

Anti‐static Agent Containing Zinc Oxide and its Modification for PA6 Fiber

A new anti‐static agent was synthesized from zinc oxide‐adipic acid‐polyethylene glycol and caprolactam by three‐step reactions. The antistatic agent (called poly(ether ester amide zinc oxide) or PEEAZ) was analyzed by IR and DSC. The results showed that zinc oxide existed in the main chain of PEEAZ. The glass temperature and melt temperature of poly(ether ester amide zinc oxide) (referred to as PEEAZ in the following) decreased with increasing poly(ether ester zinc oxide) increasing in PEEAZ. Antistatic PA6 fiber was obtained by adding PEEAZ 2–8% (wt/wt) to PA6 during blend spinning. The specific resistance and the static half‐value period of PA6 fiber was less than 10⁹Ω · cm and 60 sec, respectively. Excellent antistatic property remained after being washed 30 times.     

Thermal Properties of Copoly(L‐lactic acid/glycolic acid) by Direct Melt Polycondensation

Poly(L‐lactic acid‐co‐glycolic acid) (PLGA) was prepared from hydroxy‐acids with melt polymerization. In this way, the copoly(L‐LA/GA) (PLGA) was synthesized directly using a binary catalyst (tin chloride dihydrate/p‐toluenesulfonic acid). The thermal properties of PLGA were studied by differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR). The results show that the melting point of PLGA decreases with increasing mole fraction of GA units in the copolymer. In addition, the melting point of polymer also decreases with increasing degree of racemization of the polymer.     

Solvent effects on oxygen atom transfer reaction between manganese(V)-oxo corrole and alkene

Pseudo-first order reaction rate constants of 5,10,15-tris（pentafluorophenyl）corrole Mn（V）-oxo (F₁₅CMn（V）-oxo),5,15-bis（pentafluorophenyl）-10-（phenyl）corrole Mn（V）-oxo(F₁₀CMn（V）-oxo),5,15- bis（phenyl）-10-（pentafluorophenyl）corrole Mn（V）-oxo（F₅CMn（V）-oxo） and 5,10,15-tris（phenyl）corrole Mn（V）-oxo（F₀CMn（V）-oxo） with a series of alkene substrates in different solvents were determined by UV-vis spectroscopy.The results indicated that the oxygen atom transfer pathway between Mn（V）-oxo corrole and alkene is solvent-dependent.     

Development of a Sensitive Method for the Determination of 4‐(Methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol in Human Urine Using Solid‐phase Extraction Combined with Ultrasound‐assisted Dispersive Liquid–liquid Microextraction and LC‐MS/MS Detection

An efficient and sensitive analytical method based on molecularly imprinted solid‐phase extraction (MISPE) and reverse‐phase ultrasound‐assisted dispersive liquid–liquid microextraction (USA‐DLLME) coupled with LC–MS/MS detection was developed and validated for the analysis of urinary 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol (NNAL), a tobacco‐specific nitrosamine metabolite. The extraction performances of NNAL on three different solid‐phase extraction (SPE) sorbents including the hydrophilic‐lipophilic balanced sorbent HLB, the mixed mode cationic MCX sorbent and the molecularly imprinted polymers (MIP) sorbent were evaluated. Experimental results showed that the analyte was well retained with the highest extraction recovery and the optimum purification effect on MIP. Under the optimized conditions of MIP and USA‐DLLME, an enrichment factor of 23 was obtained. Good linearity relationship was obtained in the range of 5‐1200 pg/mL with a correlation coefficient of 0.9953. The limit of detection (LOD) was 0.35 pg/mL. The recoveries at three spiked levels ranged between 88.5% and 93.7%. Intra‐ and inter‐day relative standard deviations varied from 3.6% to 7.4% and from 5.4% to 9.7%, respectively. The developed method combing the advantages of MISPE and DLLME significantly improves the purification and enrichment of the analyte and can be used as an effective approach for the determination of ultra‐trace NNAL in complex biological matrices.     

Convenient and Efficient Synthesis of 1,1‐Bis‐(4‐alkylthiophenyl)‐1‐alkenes via Tandem Friedel–Crafts Acylation and Alkylation of Sulfides and Acyl Chlorides

1,1‐Bis(4‐alkylthiophenyl)‐1‐alkenes were conveniently and efficiently prepared from alkyl phenyl sulfides and acyl chlorides via a tandem Friedel–Crafts acylation and alkylation in the presence of anhydrous aluminum chloride. The scope, limitation, and mechanism of the tandem reaction were also discussed.