Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

Clustering study in Eu(DBM)3Phen-doped polymer optical fibers by optical properties and near-field scanning microscopy

The clusters of Eu3+ ion in Eu(DBM)3Phen-doped polymethyl methacrylate (PMMA) have been studied by three means. The relative fluorescence intensity ratio of the 5D0 → 7F2 to 5D0 → 7F1 transitions with different concentrations of Eu3+ in Eu(DBM)3Phen-doped PMMA and metastable-state (5D0) lifetime dependence on Eu3+ concentration are analyzed. The analysis indicates that there are no clustering effects in Eu3+ ions of Eu(DBM)3Phen-doped PMMA when the Eu3+ doping concentration is up to 1.0 wt.-%. At the same time, the clustering effect has not been observed by the scanning near-field optical microscopy (SNOM) in Eu(DBM)3Phen-doped PMMA with 1.0 wt.-% of Eu3+ ions. The analysis reveals that a high concentration of Eu3+ can be incorporated into polymer optical fiber (POF) without clustering effect.OCIS codes: 180.5810, 300.6280, 250.5460, 160.5690.     

虚拟技术在实验教学中的应用

介绍了虚拟技术在实验教学改革中的作用与意义，探讨了电子信息系统实验教学改革的新思路与实现措施，并总结了实验教学改革的初步成果．     

Metallothionein as a biomarker for mercury in tissues of rat fed orally with cinnabar

Cinnabar, as one of the most widely used mineral drugs in traditional Chinese medicines, has been proven to have prominent curative effects in clinical use for more than 2000 years. But the safety and toxicity of the drug has been under constant debate in clinic usage. Metallothionein (MT) contains about 30% of cysteine in the molecule, and plays an important detoxification role against heavy metals. In this study, it was used as a biomarker to assess mercurial accumulation in rats fed orally with cinnabar. After feeding rats with cinnabar by gastric gavage at different dosages and at different times, the distribution of heavy metals (including mercury, copper and zinc) and MT was investigated among rat tissues, including liver, kidney, heart, brain, testis and blood. Metals and MT determinations were carried out using inductively coupled plasma mass spectrometry (ICP‐MS) and a modified mercury saturation assay technique respectively. The results indicated that mercury was easily accumulated in the tissues of rats exposed to cinnabar, especially in kidney. For example: at a feeding dosage of 5 g kg^?1 (bw) for 4 weeks, the mercury concentrations in kidney were 13, 8.7, 21.6 and 26 times those in liver, testis, brain and heart respectively; and at 2.5 g kg^?1 (bw) for 2 weeks, the mercury concentrations in kidney were 21, 2.1, 3 and 21 times those in liver, testis, brain and heart respectively. In addition, mercury in kidney and liver of all cinnabar groups was significantly higher than that of the control group (P < 0.01). A high positive correlation observed between MT concentrations and mercury levels in both liver and kidney (R² = 0.9299, P < 0.02 for liver; R² = 0.9923, P < 0.0008 for kidney) indicated that MT could be used as a biomarker for mercury in tissues. Copyright © 2004 John Wiley & Sons, Ltd.     

等厚双层涂层材料受集中力作用的平面问题理论解

界面应力的正确评价是分析薄膜涂层材料力学特性的难题之一。利用镜像点法和Dirichlet等值性原理，本文推导了等厚双层薄膜涂层材料受表面集中力作用的平面问题理论解。该显式理论解是以固定在各镜像点上的局部坐标系下的Goursat应力函数的形式给出的。对应于高阶镜像点的应力函数，可通过递推的方法，从对应于低阶镜像点的应力函数求得，而且也易于计算机编程。随着镜像点阶数的增大，它与界面的距离也越来越大，因而相对应的应力函数对界面应力的影响越来越小。最后的算例表明，只需考虑前面有限个镜像点，便可获得足够精度的解。该理论解可作为格林函数，以求解复杂问题的理论解，也可用作边界元法的基本解，提高数值计算的精度和效率。     

Crystallographic report: Crystal structure of tetra(4‐methyl‐5‐imidazole‐carboxyaldehyde)zinc(II) diperchlorate

The central zinc(II) atom in the title complex is tetrahedrally coordinated by four nitrogen atoms derived from 4‐methyl‐5‐imidazolecarboxyaldehyde ligands with Zn? N in the range 2.007(3) to 2.026(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

The negative gradient flow for the <Emphasis Type="Italic">L</Emphasis><Superscript>2</Superscript>-integral of Ricci curvature

 In this paper, the negative gradient flow for the L ²-integral of Ricci curvature on a 3-manifold is considered. It is not known whether the solution to this fourth order geometric evolution equation exists, and whether it will develop singularities in finite time. Based on the trick of De Turck and the idea of Hamilton on the flow of Ricci curvature, the local existence on any compact Riemannian manifold is obtained. In addition, the conditions for the occurences of singularities in finite time during the evolution and the asymptotic behavior of the flow on a 3-manifold are discussed. Received: 22 April 2002 / Revised version: 5 January 2003 Published online: 24 April 2003 This work is partially supported by the Foundations of NNSF of China, the Foundation for University Key Teacher by MEC and Shanghai Priority Academic Discipline.     

Tokamak Experiment and Tokamak Engineering——Development of the Plasma Diagnostics on HL-2A Tokamak

The main mission the HL-2A tokamak is of the experiments on to explore the divertor physics and to investigate the plasma confinement, transport and instabilities with high power auxiliary heating and advanced fuelling, it is necessary to develop more new diagnostics and increase the spatial and temporal resolutions of the measurements for exist system. Up to now, about 30 diagnostic systems have been moved from HL-1M to HL-2A tokamak. Other 10 diagnostic systems are being designed and installed on the device. In developed in last 2 years, will be presented.     

Higher-order radiative perturbation theory

As a computationally effective tool, the first-order term of the radiative perturbation theory has been computed successfully, and has been applied in a number of areas. In this article, we develop the computational expressions for the higher-order terms of the perturbation expansion in a plane parallel atmosphere. These expressions are then implemented, and numerical results for some typical cases are presented. These results indicate that the computation is successful and that the higher-order terms are essential in cases where the first-order term alone cannot predict the perturbation with sufficient accuracy.     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.