Selective fluorescence response and magnetic separation probe for 2,4,6-trinitrotoluene based on iron oxide magnetic nanoparticles

Despite the rapid development of nanomaterials and nanotechnology, it is still desirable to develop novel nanoparticle-based techniques which are cost-effective, timesaving, and environment-friendly, and with ease of operation and procedural simplicity, for assay of target analytes. In the work discussed in this paper, the dye fluorescein isothiocyanate (FITC) was conjugated to 1,6-hexanediamine (HDA)-capped iron oxide magnetic nanoparticles (FITC–HDA Fe₃O₄ MNPs), and the product was characterized. HDA ligands on the surface of Fe₃O₄ MNPs can bind 2,4,6-trinitrotoluene (TNT) to form TNT anions by acid–base pairing interaction. Formation of TNT anions, and captured TNT substantially affect the emission of FITC on the surface of the Fe₃O₄ MNPs, resulting in quenching of the fluorescence at 519 nm. A novel FITC–HDA Fe₃O₄ MNPs-based probe featuring chemosensing and magnetic separation has therefore been constructed. i.e. FITC–HDA Fe₃O₄ MNPs had a highly selective fluorescence response and enabled magnetic separation of TNT from other nitroaromatic compounds by quenching of the emission of FITC and capture of TNT in aqueous solution. Very good linearity was observed for TNT concentrations in the range 0.05–1.5 μmol?L^?1, with a detection limit of 37.2 nmol?L^?1 and RSD of 4.7 % (n?=?7). Approximately 12 % of the total amount of TNT was captured. The proposed methods are well-suited to trace detection and capture of TNT in aqueous solution.

Comparison of microwave‐assisted and conventional extraction of mangiferin from mango (Mangifera indica L.) leaves

Mangiferin is the main bioactive component in mango leaves, which possesses anti‐inflammatory, antioxidative, antidiabetic, immunomodulatory, and antitumor activities. In the present study, a microwave‐assisted extraction method was developed for the extraction of mangiferin from mango leaves. Some parameters such as ethanol concentration, liquid‐to‐solid ratio, microwave power, and extraction time were optimized by single‐factor experiments and response surface methodology. The optimal extraction conditions were 45% ethanol, liquid‐to‐solid ratio of 30:1 (mL/g), and extraction time of 123 s under microwave irradiation of 474 W. Under optimal conditions, the yield of mangiferin was 36.10 ± 0.72 mg/g, significantly higher than that of conventional extraction. The results obtained are beneficial for the full utilization of mango leaves and also indicate that microwave‐assisted extraction is a very useful method for extracting mangiferin from plant materials.     

An interesting two‐phase solvent system and its use in preparative isolation of aconitines from aconite roots by counter‐current chromatography

Two‐phase solvent system plays crucial role in successful separation of organic compounds using counter‐current chromatography (CCC). An interesting two‐phase solvent system, composed of chloroform/ethyl acetate/methanol/water, is reported here, in which both phases contain sufficient organic solvents to balance their dissolving capacities. Adjusting the solvent system to get satisfactory partition coefficients (K values) for target compounds becomes relatively simple. This solvent system succeeded in sample preparation of aconitine (8.07 mg, 93.69%), hypaconitine (7.74 mg, 93.17%), mesaconitine (1.95 mg, 94.52%) from raw aconite roots (102.24 mg, crude extract), benzoylmesaconine (34.79 mg, 98.67%) from processed aconite roots (400.01 mg, crude extract), and yunaconitine (253.59 mg, 98.65%) from a crude extract of Aconitum forrestii (326.69 mg, crude extract).     

Preparation of a butyl–silica hybrid monolithic column with a “one-pot” process for bioseparation by capillary liquid chromatography

A butyl–silica hybrid monolithic column for bioseparation by capillary liquid chromatography (cLC) was prepared with butyl methacrylate and alkoxysilanes through a “one-pot” process. The effects of polycondensation temperature, volume percentage of N,N′-dimethylformamide, and content of cetyltrimethylammonium bromide and butyl methacrylate on the morphologies of the hybrid monolithic columns prepared were investigated in detail. Baseline separations of proteins and small peptides on the hybrid monolithic column were achieved by cLC with gradient elution. In addition, the resulting hybrid column was also applied for analysis of tryptic digests of bovine serum albumin by cLC coupled with tandem mass spectrometry. The results demonstrate its potential application in separation of complex biological samples.     

Coagulation behaviors and in-situ flocs characteristics of composite coagulants in cyanide-containing wastewater: Role of cationic polyelectrolyte

In this paper,composite coagulants(PFS,PFSC05,PFSC1 and PFSC5),prepared by mixing polyferric sulfate(PFS)and cationic polyelectrolyte(CP)coagulants with different weight percent(Wp)of CP(Wp=0%,0.5%,1%and 5%,respectively),were adopted to treat cyanide-containing wastewater.PFSC5 exhibited superior coagulation performances at optimal conditions:the removal of total cyanide(TCN)and chemical oxygen demand(COD)was 95%–97%and 50%–55%,respectively.The effects of CP on the properties and structure of flocs were investigated by laser diffraction instrument and small-angle laser light scattering(SALLS),respectively.The results show that the flocs of PFSC5 have higher growth rate,higher strength factor and lower recovery factor than other flocs.They are also much denser and more uniform owing to the higher fractal dimension(Df)and less microflocs(10–100 m).Furthermore,the dense structure of the PFSC5 flocs can be restored after shear and is more resistant to hydraulic conditions.Particularly,detailed morphology evolution of the flocs was in-situ detected by on-line particle imaging.Due to strong ionic strength in wastewater,the CP in PFSC5 plays a significant role of adsorption,while the main mechanism of CP is electrostatic patch aggregation during the PFSC05 systems.     

Synthesis and photovoltaic properties of a star-shaped molecule based on a triphenylamine core and branched terthiophene end groups

A new star-shaped donor-acceptor molecule has been synthesized for application as the donor material in solution-processed bulk-heterojunction organic solar cells (OSCs). The molecule consists of a triphenylamine (TPA) unit as the core and a donor unit with three arms containing benzo[1,2,5]thiadiazole (BT) acceptor units and 5,5’’-dihexyl-2,2′:3′,2″-terthiophene (tTh) end groups. The molecule, denoted S(TPA-BT-tTh), exhibits a broad absorption band in the wavelength range 300-650 nm and high hole mobility of 1.1×10 -4 cm2 V -1 s 1 . An OSC device based on S(TPA-BT-tTh) as donor and [6,6]-phenyl C71 -butyric acid methyl ester (PC 70 BM) as the acceptor (1:3, w/w) exhibited a power conversion efficiency of 2.28% with a short circuit current density of 6.39 mA/cm2 under illumination of AM.1.5, 100 mW/cm2 .     

Effects of experimental conditions on the molecular composition of maltenes and asphaltenes derived from oilsands bitumen: Characterized by negative-ion ESI FT-ICR MS

A vacuum topped Canadian oilsands bitumen (VTB) was subjected to solvent precipitation and subsequently characterized by elemental analysis, gel permeation chromatograph (GPC), 1 H-NMR spectroscopy and negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Effects of experimental conditions such as solvent types (n-C5 , n-C6 , and n-C7 ), solvent purity, and solvent washing time on asphaltenes yields, bulk composition, and molecular composition of detectable heteroatom compounds in ESI source were determined. Elemental nitrogen and sulfur were enriched in asphaltenes while elemental oxygen had comparable content in maltenes and asphaltenes. Molecular composition of asphaltenes varies with separation conditions. The N1 and O1 species identified by ESI FT-ICR MS were enriched in maltenes. The O2 species exhibited two different double bond equivalents (DBE) distributions and solubility in normal paraffin solvents, indicating two types of molecular structures. Multi oxygen atom containing compounds mainly detected in asphaltenes. Compound class distributions are similar for maltenes derived from n-C5 , n-C6 , and n-C7 , as well as for asphaltenes. The cyclic paraffin impurities in normal paraffin solvents had a significant influence on asphaltenes yields and heteroatom molecular composition. A portion of neutral N1 species and acidic O2 species adsorbed on asphaltenes could be dissolved by increasing washing time. Cautions should be exercised when interpreting the properties and composition of asphaltenes obtained with different experimental conditions.     

Surface‐Passivated SBA‐15‐Supported Gold Nanoparticles: Highly Improved Catalytic Activity and Selectivity toward Hydrophobic Substrates

Silanol groups on a silica surface affect the activity of immobilized catalysts because they can influence the hydrophilicity/hydrophobicity, matter transfer, or even transition state in a catalytic reaction. Previously, these silanol groups have usually been passivated by using surface‐passivation reagents, such as alkoxysilanes, bis‐silylamine reagents, chlorosilanes, etc., and surface passivation has typically been found in mesoporous‐silicas‐supported molecular catalysts and heteroatomic catalysts. However, this property has rarely been reported in mesoporous‐silicas‐supported metal‐nanoparticle catalysts. Herein, we prepared an almost‐superhydrophobic SBA‐15‐supported gold‐nanoparticle catalyst by using surface passivation, in which the catalytic activity increased more than 14 times for the reduction of nitrobenzene compared with non‐passivated SBA‐15. In addition, this catalyst can selectively catalyze hydrophobic molecules under our experimental conditions, owing to its high (almost superhydrophobic) hydrophobic properties.     

Trigonal‐Bipyramidal and Square‐Pyramidal Chromium?Manganese Chalcogenide Clusters, [E2CrMn2(CO)n]2− (E=S,Se, Te; n=9, 10): Synthesis,Electrochemistry, UV/Vis Absorption,and Computational Studies

The reactions of E powder (E=S, Se) with a mixture of Cr(CO)₆ and Mn₂(CO)₁₀ in concentrated solutions of KOH/MeOH produced two new mixed Cr? Mn? carbonyl clusters, [E₂CrMn₂(CO)₉]^2? (E=S, 1 ; Se, 2 ). Clusters 1 and 2 were isostructural with one another and each displayed a trigonal‐bipyramidal structure, with the CrMn₂ triangle axially capped by two μ₃‐E atoms. The analogous telluride cluster, [Te₂CrMn₂(CO)₉]^2? ( 3 ), was obtained from the ring‐closure of Te₂Mn₂ ring complex [Te₂Mn₂Cr₂(CO)₁₈]^2? ( 4 ). Upon bubbling with CO, clusters 2 and 3 were readily converted into square‐pyramidal clusters, [E₂CrMn₂(CO)₁₀]^2? (E=Se, 5 ; Te, 6 ), accompanied with the cleavage of one Cr? Mn bond. According to SQUID analysis, cluster 6 was paramagnetic, with S=1 at room temperature; however, the Se analogue ( 5 ) was spectroscopically proposed to be diamagnetic, as verified by TD‐DFT calculations. Cluster 6 could be further carbonylated, with cleavage of the Mn? Mn bond to produce a new arachno‐cluster, [Te₂CrMn₂(CO)₁₁]^2? ( 7 ). The formation and structural isomers, as well as electrochemistry and UV/Vis absorption, of these clusters were also elucidated by DFT calculations.