一个耦合系统自由边界问题的整体古典解

§ 1　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｉｓｐａｐｅｒｗｅｄｉｓｃｕｓｓｔｈｅｇｌｏｂａｌｃｌａｓｓｉｃａｌｓｏｌｕｔｉｏｎｏｆａｍｕｌｔｉｄｉｍｅｎｓｉｏｎａｌｑｕａｓｉｓｔａｔｉｏｎａｒｙｐｒｏｂｌｅｍ .Ｔｈｅｐｒｏｂｌｅｍｃｏｍｅｓｆｒｏｍｔｈｅｄｉｓｃｕｓｓｉｏｎｏｆａｇｒｏｗｔｈｍｏｄｅｌｏｆｓｅｌｆｍａｉｎｔａｉｎｉｎｇｐｒｏｔｏｃｅｌｌ(ｓｅｅ [1— 3])ｉｎｍｕｌｔｉｄｉｍｅｎｓｉｏｎａｌｃａｓｅ .Ｔｈｅｐｒｏｔｏｃｅｌｌｃａｎｂｅｖｉｓｕａｌｉｚｅｄａｓｈａｖｉｎｇａｐｏｒｏｕｓｓｔ…     

Hierarchical structures in a turbulent pipe flow

A hierarchical structure (HS) analysis (β-test and γ-test) is applied to a fully developed turbulent pipe flow. Velocity signals are measured at two cross sections in the pipe and at a series of radial locations from the pipe wall. Particular attention is paid to the variation of turbulent statistics at wall units 10<y⁺<3000. It is shown that at all locations the velocity fluctuations satisfy the She–Leveque hierarchical symmetry (Phys. Rev. Lett. 72 (1994) 336). The measured HS parameters, β and γ, are interpreted in terms of the variation of fluid structures. Intense anisotropic fluid structures generated near the wall appear to be more singular than the most intermittent structures in isotropic turbulence and appear to be more outstanding compared to the background fluctuations; this yields a more intermittent velocity signal with smaller γ and β. As turbulence migrates into the logarithmic region, small-scale motions are generated by an energy cascade and large-scale organized structures emerge which are also less singular than the most intermittent structures of isotropic turbulence. At the center, turbulence is nearly isotropic, and β and γ are close to the 1994 She–Leveque predictions. A transition is observed from the logarithmic region to the center in which γ drops and the large-scale organized structures break down. We speculate that it is due to the growing eddy viscosity effects of widely spread turbulent fluctuations in a similar way as in the breakdown of the Taylor vortices in a turbulent Couette–Taylor flow at high Reynolds numbers.     

原子的吸收光谱和发射光谱的演示

介绍了利用光学多道分析仪和投影仪在课堂上实时演示原子的吸收光谱和发射光谱的实验方法。     

PuN基态分子势能函数与热力学函数的理论计算

在Pu的相对论有效原子实势近似和N原子 6 - 311G 全电子基函数下 ,用密度泛函B3LYP方法计算得到PuN分子基态X6Σ+ 的结构与势能函数、力常数与光谱数据 .同时计算得到PuN(g)分子在 2 98K时的标准生成热力学函数ΔfH0 、ΔS0 和ΔfG0 ,分别为 - 4 87.2 39kJ/mol、95 .345J/molK和 - 5 15 .6 6 6 1kJ/mol.     

干电池供电式电子标准电池的设计

标准电池是度量电源电动势的标准仪器．利用RC4191和MC1403精密的低压稳压特性，设计一款电子稳压式的标准电池，既可克服传统汞镉标准电池的缺点，又能保证相同精度的实验性能要求．     

复方单硝酸异山梨酯-阿司匹林双缓释微丸胶囊的研制(Ⅱ)

以乙基纤维素、丙烯酸树脂Ⅱ和丙烯酸树脂Ⅲ为骨架材料分别制备单硝酸异山梨酯和阿司匹林混合骨架缓释微丸，并通过包薄膜衣进一步控制药物的释放。通过测定微丸的释放度对处方工艺进行评价，选择最佳微丸灌装胶囊．胶囊中两种药物均达到良好的缓释效果。符合中国药典对缓释制剂的要求．其体外释放过程同时符合Higuchi方程和一级释药方程，R^2值均在0．995以上。     

POROSITY CALCULATION OFMIXTURES OF FIBROUS PARTICLES

The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.     

HT—6M闭环反馈平衡控制系统

本文描述HT-6M托卡马克装置闭环反馈平衡控制系统的结构组成,通过对各个环节的简化,得到了有效实用的数学模型,进而分析了系统稳态和动态性能。实验结果表明,该系统运行可靠;并且,将等离子体环水平位移控制在2mm以内。     

液态铅的电阻率

采用精确的结构因数实验数据和Ｂｅｈａｖｉ模型赝势，用Ｚｉｍａｎ理论计算了液态铅的电阻率．计算结果和实验数据符合很好．讨论了Ｚｉｍａｎ理论对液态铅的适用性以及适合于液态铅的赝势的特征．     

KrF准分子激光激发掺锗光纤折射率扰动的非线性过程

本文采用了一种简单的功率监测法,观察了KrF准分子激光对掺锗光纤折射率影响的非线性过程。观察到子纤芯折射率扰动过程中非稳定现象、饱和现象和折射率扰动的非线性。