Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

含DNA配体的VT吸附剂结构及其血液相容性研究

 本文以异氰尿酸三烯丙酯 TAIC)为交联剂,醋酸乙烯酯(VAC)为单体合成的共聚物(VT),经皂化和活化后,固载上DNA,即得含DNA配体的VT吸附剂。测定了各产物的物理性能,表面形态,红外光谱和血液相容性。实验结果表明:聚合物具有较大平均孔径,皂化后亲水性增强,随活化而使比表面积增大,孔分布趋于均匀,固载DNA的能力高,致使最后产物表面DNA覆盖致密程度高,考察其血液相容性良好,对血小板粘附率约为10％,对白细胞无破坏,每克吸附剂清除抗-DNA蛋白2小时可达60％以上。     

Film formation from pure and mixed latices; transient fluorescence study

A fast transient fluorescence technique was used to study latex film formation induced by organic solvent vapor. Mixtures of pyrene (P)- and naphthalene (N)-labeled and/or pure naphthalene-labeled latex films were prepared separately from poly(methyl methacrylate) (PMMA) particles. Then these pure and mixed latex films were exposed to vapor of various chloroform-heptane mixtures in seven different experiments. In both films, fluorescence lifetimes from N were monitored during vapor-induced film formation. It was observed that N lifetimes decreased as the vapor exposure time is increased. A Stern-Volmer kinetic analysis was used for low quenching efficiencies to interpret the decrease in N lifetimes. A Prager-Tirrell model was employed to obtain back-and-forth frequencies, nu, of reptating PMMA chains during latex film formation induced by solvent vapor. In both pure and mixed latex films, nu values were found to be correlated with the chloroform content in the vapor mixture. It was observed that polymer interdiffusion obeyed a t1/2 law during film formation.     

H2SO4处理的Nb2O5/γ -Al2O3催化剂表面酸性与催化性能研究

用Hammett指示剂法、红外光谱（IR）、示差扫描量热-热重法（DSC-TG）和微型催化反应装置等研究了H₂SO₄处理的负载型Nb₂O₅/γ-Al₂O₃催化剂表面酸性和催化异丁烯（IB）与异丁醛（IBA）反应生成2，5-二甲基-2，4-己二烯（DMHD）的催化性能。结果表明随所用H₂SO₄浓度增加，Nb₂O₅/γ-Al₂O₃催化剂表面酸性增强，B酸量增加，L酸量先增加后下降。经H₂SO₄处理的Nb₂O₅/γ-Al₂O₃催化剂的催化活性明显增加，但当H₂SO₄浓度超过0.05 mol·L^-1时催化活性又急剧下降，这可能是因为在H₂SO₄处理的催化剂表面形成的强酸中心上，产物分子进一步转化为积炭且封闭催化剂活性表面，导致催化活性下降。     

Density functional theory study of the mechanism of the proline-catalyzed intermolecular aldol reaction

Transition structures associated with the C-C bond-formation step of the proline-catalyzed intermolecular aldol reaction between acetone and isobutyraldehyde have been studies using density functional theory methods at the B3LYP/6-31G** computational level. A continuum model has been selected to represent solvent effects. For this step, which is the stereocontrolling and rate-determining step, four reactive channels corresponding to the syn and anti arrangement of the active methylene of the enamine relative to the carboxylic acid group of l-proline and the re and si attack modes to both faces of the aldehyde carbonyl group have been analyzed. The B3LYP/6-31G** energies are in good agreement with experiment, allowing us to explain the origin of the catalysis and stereoselectivity for these proline-catalyzed aldol reactions. Received: 2 April 2002 / Accepted: 18 July 2002 / Published online: 11 October 2002 Acknowledgements. This work was supported by research funds provided by the Ministerio de Educación y Cultura of the Spanish Government by DGICYT (project PB98–1429). All the calculations were performed on a Cray–Silicon Graphics Origin 2000 of the Servicio de Informática de la Universidad de Valencia. We are most indebted to this center for providing us with computer capabilities. Correspondence to: L. R. Domingo e-mail: domingo@utopia.uv.es     

Microstructure and electrical properties of BaTiO<Subscript>3</Subscript> and (Ba,Sr)TiO<Subscript>3</Subscript> ferroelectric thin films on nickel electrodes

Nickel thin films have been sputtered on standard Si/SiO₂ substrates with TiO₂ as an adhesive layer. The thermal stability of these substrates was analyzed. SEM images show an increase in grain size with annealing temperature. They were found to be stable till 800°C, beyond which the nickel layer disintegrated. These substrates were used for deposition of BaTiO₃ and (Ba,Sr)TiO₃ dielectric thin films under a reducing atmosphere. The dielectric thin films were processed with various pyrolysis and annealing temperatures in order to optimize the dielectric properties. Increased pyrolysis temperatures showed an increase in the grain size. Results on these nickelised substrates were finally compared with dielectric films deposited on platinized silicon substrates under identical conditions but crystallized in an oxygen atmosphere.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

Studies on stereoselective approaches to β-carboline derivatives

Transformation of β-carboline derivatives into optically active entities were studied and the de and ee values of the resulted compounds were detected. Dedicated to Professor Károly Lempert on his 80th birthday.