基于瑞利-索末菲积分的大衍射角衍射光学元件设计方法

针对现有的衍射光学元件设计方法只适用于小角度衍射的情况,本文提出了一种基于瑞利-索末菲衍射积分的设计方法,可以用来设计具有大衍射角的衍射光学元件。先对目标光场进行坐标变换和强度调整,再利用改进的Gerchberg-Saxton算法优化得到衍射光学元件的相位分布。分别采用本文方法和原有的基于夫琅禾费衍射积分的方法设计衍射光学元件实现线条结构光和不同角度方框图形的光场重构,结果表明:原有的设计方法只适用于衍射角全角小于25°的情况,当衍射角大于25°时,重构光场会出现显著的枕形畸变和不均匀的强度分布。而本文方法在小角度和大角度衍射下都能重构出准确的衍射角和较为均匀的强度分布.     

Anti-bacterial effect of four extracts from leaves of Dracontomelon dao on Escherichia coli growth using microcalorimetry coupled with principal component analysis

The anti-Escherichia coli activities of four extracts in leaves of Dracontomelon dao, a traditional folk herb in China were investigated and compared by microcalorimetry. The four extracts are PE fraction, CHCl₃ fraction, EtOAc fraction, and n-BuOH fraction. The heat flow power–time (HFP–time) curves of E. coli growth in the presence of the four extracts were measured using an ampoule method. Then the nine thermal kinetic parameters were obtained from the curves. From the result of principal component analysis, it can be seen that parameters k ₁, k ₂, P ₁, and Q _p2 might be the main parameters in evaluating the anti-E. coli effects. In the presence of CHCl₃ fraction, EtOAc fraction, and n-BuOH fraction, k ₂, Q _p2 of E. coli decreased with increasing concentrations of the extracts. The EtOAc fraction was observed to have the strongest anti-bacterial activity with half-inhibitory concentration IC50 of 98.5 μg mL^?1. So, it can be concluded that EtOAc fraction can be further developed as anti-bacterial bioactive fraction of leaves of Dracontomelon dao.     

Luminescent Hybrid Materials Based on Laponite Clay

The spectroscopic behavior of ionic Eu³⁺ or Tb³⁺ complexes of an aromatic carboxyl‐functionalized organic salt as well as those of the hybrid materials derived from adsorption of the ionic complexes on Laponite clay are reported. X‐ray diffraction (XRD) patterns suggest that the complexes are mainly adsorbed on the outer surfaces of the Laponite disks rather than intercalated within the interlayer spaces. Photophysical data showed that the energy‐transfer efficiency from the ligand to Eu³⁺ ions in the hybrid material is increased remarkably with respect to the corresponding ionic complex. The hybrid material containing the Eu³⁺ complex shows bright red emission from the prominent ⁵D₀→⁷F₂ transition of Eu³⁺ ions, and that containing the Tb³⁺ complex exhibits bright green emission due to the dominant ⁵D₄→⁷F₅ transition of Tb³⁺ ions.     

A General Method for Preparing Bridged Organosilanes with Pendant Functional Groups and Functional Mesoporous Organosilicas

New organosilica precursors containing two triethoxysilyl groups suitable for the organosilica material formation through the sol‐gel process were designed and synthesised. These precursors display alkyne or azide groups for attaching targeted functional groups by copper‐catalysed azide–alkyne cycloaddition (CuAAC) and can be used for the preparation of functional organosilicas following two strategies: 1) the functional group is first appended by CuAAC under anhydrous conditions, then the functional material is prepared by the sol‐gel process; 2) the precursor is first subjected to the sol‐gel process, producing porous, clickable bridged silsesquioxanes or periodic mesoporous organosilicas (PMOs), then the desired functional groups are attached by means of CuAAC. Herein, we show the feasibility of both approaches. A series of bridged bis(triethoxysilane)s with different pending organic moieties was prepared, demonstrating the compatibility of the first approach with many functional groups. In particular, we demonstrate that organic functional molecules bearing only one derivatisation site can be used to produce bridged organosilanes and bridged silsesquioxanes. In the second approach, clickable PMOs and porous bridged silsesquioxanes were prepared from the alkyne‐ or azide‐containing precursors, and thereafter, functionalised with complementary model azide‐ or alkyne‐containing molecules. These results confirmed the potential of this approach as a general methodology for preparing functional organosilicas with high loadings of functional groups. Both approaches give rise to a wide range of new functional organosilica materials.     

An Unusual Dehydratase Acting on Glycerate and a Ketoreducatse Stereoselectively Reducing α‐Ketone in Polyketide Starter Unit Biosynthesis

Polyketide synthases (PKSs) usually employ a ketoreductase (KR) to catalyze the reduction of a β‐keto group, followed by a dehydratase (DH) that drives the dehydration to form a double bond between the α‐ and β‐carbon atoms. Herein, a DH*‐KR* involved in FR901464 biosynthesis was characterized: DH* acts on glyceryl‐S‐acyl carrier protein (ACP) to yield ACP‐linked pyruvate; subsequently KR* reduces α‐ketone that yields L ‐lactyl‐S‐ACP as starter unit for polyketide biosynthesis. Genetic and biochemical evidence was found to support a similar pathway that is involved in the biosynthesis of lankacidins. These results not only identified new PKS domains acting on different substrates, but also provided additional options for engineering the PKS starter pathway or biocatalysis.     

Thermal conductivity behavior of SiC–Nylon 6,6 and hBN–Nylon 6,6 composites

A study was performed to determine the effect of the content and orientation of fillers on the thermal conductivity of a polymeric composite packed with hexagonal boron nitride (hBN) and silicon carbide (SiC) fillers. The thermal conductivity behavior of SiC–Nylon 6,6 and hBN–Nylon 6,6 composites was more dependent on the orientation and shape of the filler than on its thermal conductivity. The thermal conductivity of SiC–Nylon 6,6 composites with 59 % (v/v) isotropic SiC fillers increased from 0.25 to 3.83 W/m K. That of hBN–Nylon 6,6 composites with 62 % (v/v) anisotropic hBN fillers increased from 0.25 to 2.16 W/m K in the perpendicular direction whereas in the parallel direction it increased rapidly to 8.55 W/m K .     

The morphologies and optoelectronic properties of delafossite CuFeO2 thin films prepared by PEG assisted sol–gel method

Single phase delafossite CuFeO₂ thin films were synthesized by a simple sol–gel method. The influence of polyethylene glycol (PEG) on the morphology and optoelectronic properties of the films was studied by addition of 1.0 g PEG in 10 ml precursor solution. The crystal sizes of the derived CuFeO₂ films with and without addition of PEG were 49 nm, but the sample with addition of PEG (labeled as CFO-PEG) showed weaker c-axis orientation growth. The sample without addition of PEG (labeled as CFO) showed a compact surface without detectable pores and had a thickness around 50 nm. However, the sample CFO-PEG exhibited a porous surface with worm-like grains in nanometric scale and had a thickness around 310 nm. Enhanced absorbance in UV–vis region was observed for the sample CFO-PEG which might ascribe to both the thickness and porous surface. The optical direct bandgaps at near-UV were estimated to be ~3.0 and 3.38 eV for the sample CFO-PEG and CFO, respectively. Though the porous surface of CFO-PEG has improved the absorbance in UV–vis region, the resistivity has also been increased due to the homogeneous distribution of interspaces between the worm-like grains, which makes the incident photon to current efficiency of CFO-PEG lower than that of CFO.     

Click approaches in sol–gel chemistry

The combination of the copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction with sol–gel processing enables the versatile preparation of sol–gel materials under different shapes with targeted functionalities through a diversity-oriented approach. In this account, the development of the CuAAC reaction under anhydrous conditions for the synthesis of sol–gel precursors and for the assembling of magnetic nanoparticles on self-assembled monolayers is related, as well as the use of the classical CuAAC methodologies for the functionalization of mesoporous silica nanoparticles and microdots arrays. Coupling CuAAC and Sol–Gel will result in simplified preparations of multifunctional materials with controlled morphologies.     

磁固相萃取与高效液相色谱-等离子体质谱联用检测癌症病人尿样中的卡铂药物

制备了甲基丙烯酸(MAA)改性Fe3O4纳米颗粒(Fe3O4@SiO2@MAA),建立了磁固相萃取(MSPE)-高效液相色谱(HPLC)-等离子体质谱(ICP-MS)检测癌症病人尿样中药物卡铂(CBP)的新方法。在最优条件下,该方法对CBP的检出限为29.9ng/L,相对标准偏差(RSD,cCBP=0.2μg/L)为9.5%,富集倍数为27.7,线性范围为0.1~100μg/L。不同批次合成的Fe3O4@SiO2@MAA萃取CBP的RSD为11.5%(n=5)。将该方法用于同一癌症病人在化疗过程中和化疗结束后两个尿样中CBP的分析,尿样中完整CBP的浓度分别为51.15μg/L和24.65μg/L,加标回收率为93.2%~103.7%。