Polypyrrole stretchable actuators

Here, we report a simple way to prepare stretchable polypyrrole (PPy)‐based actuator materials that can be operated over a wide dynamic strain range and generate useable actuation displacements and pressures. The stretchable actuators were prepared as a laminated composite of PPy and a gold‐coated roughened rubber sheet. By manipulating the corrugated surface of the rubber substrate, the stretchability of PPy was greatly improved. Gold‐coated rubbers could be stretched to 30% without significant change in electrical resistance. The corrugated PPy/gold/rubber laminates successfully showed ～1% of actuation strain even when prestretched to 24%. The actuation strains were smaller than for similar free‐standing PPy films and a detailed analysis of the effects of corrugation and of the rubber substrate are presented to predict actuation strain under various prestretch strains. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Immobilization of invertase in conducting copolymers of 3-methylthienyl methacrylate

Immobilization of invertase in conducting copolymer matrices of 3-methylthienyl methacrylate with pyrrole and thiophene was achieved by constant potential electrolysis using sodium dodecyl sulfate (SDS) as the supporting electrolyte. Polythiophene (PTh) was also used in entrapment process for comparison. Kinetic parameters, Michaelis-Menten constant, K(m), and the maximum reaction rate, V(max), were investigated. Operational stability and temperature optimization of the enzyme electrodes were also examined.     

Synthesis and characterisation of thermomesogenic polysiloxanes with 2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione units in the main chain

The synthesis of the first two liquid crystalline polysiloxanes bearing 3,6-diaryl-2,5-dihydropyrrolo-[3,4-c]pyrrole-1,4-dione units in their main chain are described. Investigations on their thermotropic phase behaviour by polarising microscopy reveal nematic or smectic enantiotropic phases, respectively.     

Determination of the health hazards due to background radiation sources in the city of Adapazari,Northwestern Turkey

Human body is exposed to ionising radiations both internally and externally by mainly high-energy cosmic ray particles incident on the earth's atmosphere and radioactive nuclides that originated in the earth's crust. The main objective of this study is to assess the health hazards due to environmental radiation sources in the city of Adapazari, one of the most important industrial cities of the country, Northwestern Turkey. For this purpose, natural radiation sources, external terrestrial radiations, cosmic radiations, and inhalation exposures have been investigated. The annual average external terrestrial radiation doses were determined as 0.08 and 0.35 mSv at outdoor and indoor atmospheres, respectively. The annual average cosmic radiation doses were found to be 0.08 and 0.05 mSv for directly ionising photon components and neutron components, respectively. The annual average inhalation exposure doses due to radon and thoron were obtained as 1.42 and 0.19 mSv, respectively, in the region. The annual average effective dose due to natural radiation sources was determined as a total of 2.35 mSv with the predetermined ingestion radiation dose. The lifetime cancer risk due to the background ionising radiations has been determined as 0.9×10^?2 for the residents of the Adapazari city, with the average lifespan of 70 years. The results of the effective doses due to background radiation sources in the region and the worldwide averages were discussed.     

Effects of surface inactivation, high temperature drying and preservative treatment on surface roughness and colour of alder and beech wood

Although extensive research has been conducted in wood surface quality analysis, a unified approach to surface quality characterisation does not exist. Measurements of the variation in surface roughness and surface colour are used widely for the evaluation of wood surface quality. Colour is a basic visual feature for wood and wood-based products. Colour measurement is one of the quality control tests that should be carried out because the colour deviations are spotted easily by the consumers. On the other hand, a common problem faced by plywood manufacturers is panel delamination, for which a major cause is poor quality glue-bonds resulting from rough veneer. Rotary cut veneers with dimensions of 500 mm × 500 mm × 2 mm manufactured from alder (Alnus glutinosa subsp. barbata) and beech (Fagus orientalis Lipsky) logs were used as materials in this study. Veneer sheets were oven-dried in a veneer dryer at 110 °C (normal drying temperature) and 180 °C (high drying temperature) after peeling process. The surfaces of some veneers were then exposed at indoor laboratory conditions to obtain inactive wood surfaces for glue bonds, and some veneers were treated with borax, boric acid and ammonium acetate solutions. After these treatments, surface roughness and colour measurements were made on veneer surfaces. High temperature drying process caused a darkening on the surfaces of alder and beech veneers. Total colour change value (ΔE^*) increased linear with increasing exposure time. Among the treatment solutions, ammonium acetate caused the biggest colour change while treatment with borax caused the lowest changes in ΔE^* values. Considerable changes in surface roughness after preservative treatment did not occur on veneer surfaces. Generally, no clear changes were obtained or the values mean roughness profile (R_a) decreased slightly in R_a values after the natural inactivation process.     

Synthesis and liquid crystal properties of phthalocyanine bearing a star polytetrahydrofuran moiety

A new polymeric ligand, 6-(3,4-dicyanophenylthio)-hexyl-2-polytetrahydrofuranacetate (2) and its liquid crystalline polymeric phthalocyanine, 2,9,16,23-tetrakis-{6-(polytetrahydrofuran-2-carboxylate)-hexylthio-phthalocyaninatocobalt(II) (3), {Co[Pc(S-C₆H₁₃OCO-poly-THF)₄]}(CoPcLC) have been synthesized. The ligand and the phthalocyanine, bearing polytetrahydrofuran moieties (poly-THF), were characterized using elemental analysis, FTIR, ¹H and ¹³C NMR, and UV–Vis techniques. CoPcLC (3) promotes a greater interaction between the mesogens, resulting in solution aggregations together with a red-shift in the Q-band in the presence of the soft Ag⁺ ion. The dielectric anisotropy and phase transition temperature values of CoPcLC doped with 4-cyano-4′-n-pentylbiphenyl (5CB) were found to be 7.17 and 40.5 °C, respectively. The dielectrical anisotropy behaviour of the liquid crystals changes from the positive to the negative type. The current–voltage characteristics of the liquid crystals show a non-linear behaviour.     

In vitro evaluation of mucoadhesive vaginal tablets of antifungal drugs prepared with thiolated polymer and development of a new dissolution technique for vaginal formulations

The main objective of this work was to develop antifungal matrix tablet for vaginal applications using mucoadhesive thiolated polymer. Econazole nitrate (EN) and miconazole nitrate (MN) were used as antifungal drugs to prepare the vaginal tablet formulations. Thiolated poly(acrylic acid)-cysteine (PAA-Cys) conjugate was synthesized by the covalent attachment of L-cysteine to PAA with the formation of amide bonds between the primary amino group of L-cysteine and the carboxylic acid group of the polymer. Vaginal mucoadhesive matrix tablets were prepared by direct compression technique. The investigation focused on the influence of modified polymer on water uptake behavior, mucoadhesive property and release rate of drug. Thiolated polymer increased the water uptake ratio and mucoadhesive property of the formulations. A new simple dissolution technique was developed to simulate the vaginal environment for the evaluation of release behavior of vaginal tablets. In this technique, daily production amount and rate of the vaginal fluid was used without any rotational movement. The drug release was found to be slower from PAA-Cys compared to that from PAA formulations. The similarity study results confirmed that the difference in particle size of EN and MN did not affect their release profile. The release process was described by plotting the fraction released drug versus time and n fitting data to the simple exponential model: M(t)/M(∞)=kt(n). The release kinetics were determined as Super Case II for all the formulations prepared with PAA or PAA-Cys. According to these results the mucoadhesive vaginal tablet formulations prepared with PAA-Cys represent good example for delivery systems which prolong the residence time of drugs at the vaginal mucosal surface.     

Synthesis of block copolymers by the transformation of cationic polymerization into reversible atom transfer radical polymerization

Azo-containing polytetrahydrofuran (PTHF) obtained by cationic polymerization was used as a macroinitiator in the reverse atom transfer radical polymerization (RATRP) of styrene and methyl acrylate in conjunction with CuCl₂/2,2′-bipyridine as a catalyst. Diblock PTHF–polystyrene and PTHF–poly(methyl acrylate) were obtained after a two-step process. In the first step of the reaction, stable chlorine-end-capped PTHF was formed with the thermolysis of azo-linked PTHF at 65–70 °C in the presence of the catalyst. Heating the system at temperatures of 100–110 °C started the polymerization of the second monomer, which resulted in the formation of block copolymers. The decomposition behavior of the azo-linked PTHF and the structure of the block copolymers were determined by ¹H NMR and gel permeation chromatography (GPC). Kinetic studies and GPC analyses further confirmed the controlled/living nature of the RATRP initiated by the polymeric radicals. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2199–2208, 2002