Electrophoretic deposition of PVA coated hydroxyapatite on 316L stainless steel

Polyvinyl alcohol (PVA) coated hydroxyapatite was deposited onto a 316L stainless steel substrate by electrophoretic deposition. Deposition was carried out in a methanol suspension at pH 5.5 using a graphite rod as an anode. Parameters such as PVA concentration, deposition voltage and time were optimized to achieve a homogeneous, crack-free adhesive coating. Techniques such as X-ray diffraction and Fourier transform infrared spectroscopy were used to study the phase composition of the coated materials and the stability of hydroxyapatite in the presence of PVA.     

Physical basis for membrane-charge selectivity of cationic antimicrobial peptides

Antimicrobial peptides are known to selectively disrupt (highly charged) microbial membranes by asymmetrical incorporation into the outer layers. We present a physical basis for membrane-charge selectivity of cationic antimicrobial peptides. In particular, we provide a clear picture of how peptide-charge Q influences the asymmetrical insertion--one salient feature is the existence of an optimal peptide charge, at which selective insertion is optimized. Our results suggest that large Q is required for antimicrobial selectivity, consistent with experiments.     

Observation of a charmoniumlike state produced in association with a J/psi in e+e- annihilation at sqrt[s] approximately equal to 10.6 GeV

We report the first observation of a charmoniumlike state recoiling from the J/psi in the inclusive process e+e- -->J/psi+anything at a mass of (3.943+/-0.006+/-0.006) GeV/c{2}. We also observe the decay of this state into D*D[over ] and determine its intrinsic width to be less than 52 MeV/c{2} at the 90% C.L. These results are obtained from a 357 fb{-1} data sample collected with the Belle detector near the Upsilon(4S) resonance, at the KEKB asymmetric-energy e+e- collider.     

Dynamic PIV measurement of a high-speed flow issuing from vent-holes of a curtain-type airbag

A curtain-type airbag is a safety device designed to protect passengers from the side collisions of a car. The curtain-type airbag system consists of an inflator, a fill-hose, and a curtain-airbag. The fill-hose is a passageway and distributor of the exploded gases from the inflator to the airbag through vent-holes. Although the design of vent-holes is important for proper deployment of the airbag, it is very difficult to measure the exceedingly high speed flow issuing from the vent-holes by using conventional measurement methods. In this study, we employed a dynamic PIV technique to measure the temporal evolution of instantaneous velocity fields of the flow ejecting from the vent-holes. From the velocity field data measured at a frame rate of 2000 fps, the temporal variation of the volume flux from vent-holes was also evaluated for the diagnosis of airbag performance. The flows ejecting from the vent-holes showed high velocity fluctuations, and the maximum velocity was about 480 m/s. The instantaneous velocity fields in the initial stage showed a swaying motion of a high-speed jet. The accumulated volume flux from the vent-holes was also compared at each vent-hole region.     

Photoluminescence of ZnO nanowires dependent on O2 and Ar annealing

High-purity ZnO nanowires have been synthesized on Si substrates without the presence of a catalyst at 600 °C by a simple thermal vapor technique. Photoluminescence (PL) spectra of the annealed samples at 900 °C under oxygen and argon gases have been investigated. After O₂ or Ar annealing, the PL visible-emission intensity that is related to intrinsic defects (oxygen vacancies) is greatly reduced compared with as-grown ZnO nanowires because the oxygen-gas ions or oxygen interstitials diffuse into the oxygen vacancies during annealing process. The blue-band peak of the O₂- or Ar-annealed ZnO naonowires is also smaller than the green-band peak in the visible broadband because of the reduction of oxygen vacancies. Therefore, the main intrinsic defects (oxygen vacancies) of as-grown ZnO nanowires can be reduced by O₂ or Ar annealing, which is an important procedure for the development of advanced optoelectronic ZnO nanowire devices.     

High-frequency characteristics of CoFeVAlONb thin films

High-frequency characteristics of CoFeVAlONb thin films were studied. A thin film of Co_43.47Fe_35.30V_1.54Al_5.55O_9.93Nb_4.21 is observed to exhibit excellent magnetic properties; magnetic coercivity of 1.24 Oe, uniaxial in-plane anisotropy field of 66.99 Oe, and saturation magnetization of 19.8 kG. The effective permeability of the film is as high as 1089 and is stable up to 1.8 GHz, and with ferromagnetic resonance over 3 GHz. This film also has very high electrical resistivity of about 628 μΩ cm. These superior properties make it ideal for high-frequency magnetic applications.     

Electrical and magnetic properties of CoFeAlO thin films

Influences of oxygen-partial pressure and annealing on the electrical and magnetic properties of CoFeAlO thin films were systematically investigated by means of resistivity, permeability, magnetization and ferromagnetic resonance (FMR) measurements. It was found that, with increasing oxygen-partial pressure or under annealing, the electrical resistivity of the film increased and the magnetic softness decreased, which is attributed to the microstructural change of the film. Interestingly, an as-deposited Co_45.30Fe_20.65Al_19.34O_14.71 film was found to exhibit an inverted hysteresis loop with negative coercivity, and this peculiar phenomenon disappeared upon effects of oxygen-partial pressure and annealing. It was also found that the as-deposited films owned a narrow FMR line width that increased with increasing oxygen-partial pressure or under annealing.     

Spectral probing of carrier traps in Si–Ge alloy nanocrystals

Photogenerated carriers in Si–Ge alloy nanocrystals (NCs) prepared by co‐sputtering method were investigated by mean of transient induced absorption. The carrier relaxation features multiple components, with three decay life times of τ ≈ 600 fs, 12 ps, and 15 ns, established for Si_0.2Ge_0.8 alloy NCs of a mean crystal size of 9 nm and standard deviation of 3 nm. Deep carrier traps, identified at the boundary between the NCs and the SiO₂ host with the ionization energy of about 1 eV, are characterized by a long‐range Coulombic potential. These are responsible for rapid depletion of free carrier population within a few picoseconds after the excitation, which explains the low emissivity of the investigated materials, and also sheds light on the generally low luminescence of Si/Ge and Ge NCs. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Observation of time-dependent CP violation in B0 --> eta'K0 decays and improved measurements of CP asymmetries in B0 --> phiK0, KS0KS0KS0 and B0 --> J/psiK0 decays

We present improved measurements of CP-violation parameters in B(0) --> phiK(0), eta(')K(0), KS(0)KS(0)KS(0) decays based on a sample of 535 x 10(6) BB pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB energy-asymmetric e(+)e(-) collider. We obtain sin2phi1(eff)=+0.64+/-0.10(stat)+/-0.04(syst) for B(0) --> eta(')K(0), +0.50+/-0.21(stat)+/-0.06(syst) for B(0) --> phiK(0), and +0.30+/-0.32(stat)+/-0.08(syst) for B(0) --> KS(0)KS(0)KS(0) decays. We have observed CP violation in the B(0) --> eta(')K(0) decay with a significance of 5.6 standard deviations. We also perform an improved measurement of CP asymmetries in B(0) --> J/psiK(0) decays and obtain sin2phi1=+0.642+/-0.031(stat)+/-0.017(syst).     

Application of Mössbauer spectroscopy in phase analysis of corrosion products from nuclear power plants

Magnetic phases of corrosion products from nuclear power plant WWER-440 (Jaslovské Bohunice) steam generators and secondary circuit pipes were investigated using transmission Mössbauer spectroscopy technique. The main components of secondary circuit’s corrosion products are magnetite (Fe₃O₄) and hematite (α-Fe₂O₃) in different ratios. The results can be used for optimal control and maintenance of WWER-440 nuclear reactors as well as for optimisation of water chemistry regime.