In situ deposition behavior of silica-based layers and its effect on thermal degradation of IN713 turbine blades during operation of a micro-gas turbine

This study examined the in situ deposition behavior of silica-based layers on IN713 turbine blades during the operation of a 13 kgf-class gas turbine at a rotation speed of 20,000/min as well as its effect on the degradation of the metallic substrate. Tetraethylorthosilicate (TEOS) was mixed with the fuel (liquid petroleum gas, LPG) and burned to generate silica-based coating precursors for deposition from the flame. Two deposition conditions were adopted. For condition 1 (C1), the silicon-to-carbon ratio in the mixed fuel was set at 0.1 mol% for the first 5 min and at zero mol% for the final 95 min in a 100-min operation. For condition 2 (C2), the ratio was set at 0.005 mol% during the entire 100 min operation. The total TEOS feed was the same under both conditions. C1 resulted in a rather uniform and thicker (5-10 μm on the pressure side) porous silica-based coating on the blade than C2. The in situ deposited layer of C1 was well preserved on the blade and protected the underlying metallic substrate from oxidation during the entire 100 min operation. The layer on the C2 blades was ∼5 μm thick at the region near to root, but was too thin in the other areas on the blade to be protective. The early build-up of a porous layer to an effective thickness on the blades produced a thermal barrier toward the substrate as well as a diffusion barrier toward the oxidizing elements during operation.     

Minimum entropy density method for the time series analysis

The entropy density is an intuitive and powerful concept to study the complicated nonlinear processes derived from physical systems. We develop the minimum entropy density method (MEDM) to detect the structure scale of a given time series, which is defined as the scale in which the uncertainty is minimized, hence the pattern is revealed most. The MEDM is applied to the financial time series of Standard and Poor’s 500 index from February 1983 to April 2006. Then the temporal behavior of structure scale is obtained and analyzed in relation to the information delivery time and efficient market hypothesis.     

Cystamine-incorporated gelatin microsphere and its redox-responsive release property

Reduction-responsive cystamine-incorporated gelatin microspheres were prepared by an emulsification method. On SEM micrograph, the microsphere, prepared at pH 9.0 and at the carboxyl/amino group molar ratio of 1:1, was sphere-like and its diameter was a few to 100 µm. The gelatin to cystamine ratio of the microsphere was about 1:0.2 (w/w), determined by energy dispersive X-ray spectroscopy. Two endothermic peaks were observed around 92°C and 126°C, which were thought to be the melting point of gelatin-rich phase and that of cystamine-rich phase, respectively. The microsphere released its payload (FITC-dextran) in dithiothreitol (a reducing agent) concentration-dependent manner.     

Development of a multi‐scale ocean model by using particle Laplacian method for anisotropic mass transfer

The direct injection of CO₂ into the deep ocean is one of the feasible ways for the mitigation of the global warming, although there is a concern about its environmental impact near the injection point. To minimize its biological impact, it is necessary to make CO₂ disperse as quickly as possible, and it is said that injection with a pipe towed by a moving ship is effective for this purpose. Because the injection ship moves over a spatial scale of O(10²km), a mesoscale model is necessary to analyse the dispersion of CO₂. At the same time, since it is important to investigate high CO₂ concentration near the injection point, a small‐scale model is also required. Therefore, in this study, a numerical model was developed to analyse CO₂ dispersion in the deep ocean by using a fixed mesoscale and a moving small‐scale grid systems, the latter of which is nested and moves in the former along the trajectory of the moving ship. To overcome the artificial diffusion of mass concentration at the interface of the two different grid systems and to keep its spatial accuracy almost the same as that in the small‐scale, a particle Laplacian method was adopted and newly modified for anisotropic diffusion in the ocean. Copyright © 2010 John Wiley & Sons, Ltd.     

An assessment of models for predicting refrigerant characteristics in adiabatic and non-adiabatic capillary tubes

Small vapor compression refrigeration systems incorporate a non-adiabatic capillary tube called a capillary tube-suction line heat exchanger (SLHX) in order to improve performance. The thermodynamic properties of the refrigerant in the capillary tube and suction pipe are influenced by associated phenomena. This study compares various relevant models. Based on the comparison recommended correlations were selected and the simulation results show that the friction factor model has the most dominant.     

Effects of B and P content on structural and magnetic properties of cast iron based amorphous alloys

Mössbauer spectroscopy, DSC and magnetic measurements have been used to study the influence of B and P on structural; magnetic properties and thermal stability of cast iron based alloys. Results reveal that addition of B and P affects appreciably: (1) the crystallization temperature and supercooled liquid region ranging between 690–781 and 53–81 K respectively; (2) the spin texture, disorder and (3) the obtained magnetization parameters. Coercive field values range between 10.09 and 16.37 A/m, with lowest value of 10.09 A/m obtained for Ci_87.82B_12.17. Saturation induction (B _s) values vary between 1.32 and 1.85 T. Highest B _s value of 1.85 T is obtained for the Ci_95.65B_4.32 alloy which is at the edge of glass forming ability, with only 4.32 at.% of boron was added to the cast iron composition. Losses (at 50 Hz and 0.32 kA/m) for the studied samples range between 0.43 and 0.82 W/kg. Lowest losses of 0.43 W/kg was obtained for the Ci_91.3P_4.35B_4.35 alloy. Phosphorous and boron additions, helps in the bulk glass forming ability, suggesting perspective applications of these cheap cast iron based soft magnetic alloys as a substitute of the conventional materials.