Impurity effects on the laser-induced crystallization of thin amorphous silicon film on glass substrate

Crystallization of 100 nm thick amorphous silicon (a-Si) films deposited on glass substrates was carried out using a dual-green-laser method. Depending on a-Si deposition method, either low-pressure chemical vapor deposition (LPCVD) or plasma-enhanced chemical vapor deposition (PECVD), the density of impurities such as Al, K, and Na within the a-Si thin films significantly varied. For the high impurity case of LPCVD, grains of 200–300 nm in size were obtained, whereas for the PECVD case a maximum grain size of about 4 μm was achieved, satisfying the requirements for applications in commercial TFT devices. These results confirm that for the use of glass substrates in polycrystallization of a-Si, controlling the impurity density during substrate preparation is critical.     

Simultaneous Separation and Determination of Isosorbide Dinitrate and Isosorbide 5-Mononitrate in Human Plasma by LC–MS–MS

A sensitive, selective, and simple liquid chromatography-tandem mass spectrometry method has been developed for the simultaneous separation and determination of isosorbide dinitrate and its active metabolite, isosorbide 5-mononitrate, in human plasma. Topiramate was used as the internal standard. Sample preparation consisted of a simple one-step liquid–liquid extraction with ethylacetate without pH adjustment. The method was fully validated with respect to linearity, sensitivity, specificity, recovery, accuracy, and precision. Isosorbide dinitrate and isosorbide 5-mononitrate were stable in standard solution and in plasma samples under storage and processing conditions. The assay was successfully applied to the pharmacokinetic study of isosorbide dinitrate and isosorbide 5-mononitrate in human plasma.     

MXene-based composite electrodes for efficient electrochemical sensing of glucose by non-enzymatic method

A recently discovered 2D transition titanium metal carbides also called as MXenes (Ti₃C₂T_x)-based nanocomposite was prepared with Cu₂O through wet precipitation technique, and these materials were further developed as the electrode for sensing glucose by chronoamperometry technique. The prepared MXene-Cu₂O (Ti₃C₂T_x-Cu₂O) nanocomposite was characterized by XRD, FTIR, UV–Vis spectroscopy, FE-SEM, EDAX, and Raman spectroscopy. Morphological studies of the composites revealed that the micro-octahedral shape of Cu₂O is distributed on the surface of MXene with size larger than bare Cu₂O. Further, the prepared composite material was fabricated as a sensing probe, and the electrochemical activities were examined by cyclic voltammetric analysis (CV) and chronoamperometric (CA) methods. From the CV and CA investigation, the current response was higher for the composite than the bare material (Cu₂O & MXene) in the presence of glucose. The amperometric investigation of MXene-Cu₂O composite for the detection of glucose shows a broad linear range (0.01–30 mM) with a sensitivity of 11.061/μAmM cm^?2 and a detection limit of 2.83 μM. Further, the fabricated sensor exhibits good selectivity with interfering species like NaCl, fructose, sucrose, urea, ascorbic acid, lactose, short response time, stability, good reproducibility, and compatibility with human serum sample. From the investigation, the prepared MXene-Cu₂O composite is a good candidate for the direct detection of glucose molecules and is also well suitable for clinical diagnosis.     

A Highly Sensitive Amperometric Galactose Biosensor Based on Graphene-doped Sol-gel-derived Titania-Nafion Composite Films

A highly sensitive amperometric galactose biosensor was developed by encapsulating galactose oxidase within the graphene-doped sol-gel titania-Nafion composite film on platinized glassy carbon electrode. Due to the combined electrocatalytic activity of graphene and Pt NPs on the electrode towards hydrogen peroxide as well as the mesoporous nature of the titania-Nafion composite, the present galactose biosensor exhibited relatively fast response time under 2 s, high sensitivity of 40.6 mAM⁻¹cm⁻², and wide dynamic range over three orders of magnitude with a detection limit of 3.78×10⁻⁶ M (S/N=3). In addition, the biocompatible composite in the biosensor secures excellent long-term stability.     

Camu-Camu Fruit Extract Inhibits Oxidative Stress and Inflammatory Responses by Regulating NFAT and Nrf2 Signaling Pathways in High Glucose-Induced Human Keratinocytes

Myrciaria dubia (HBK) McVaugh (camu-camu) belongs to the family Myrtaceae. Although camu-camu has received a great deal of attention for its potential pharmacological activities, there is little information on the anti-oxidative stress and anti-inflammatory effects of camu-camu fruit in skin diseases. In the present study, we investigated the preventative effect of 70% ethanol camu-camu fruit extract against high glucose-induced human keratinocytes. High glucose-induced overproduction of reactive oxygen species (ROS) was inhibited by camu-camu fruit treatment. In response to ROS reduction, camu-camu fruit modulated the mitogen-activated protein kinases (MAPK)/activator protein-1 (AP-1), nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB), and nuclear factor of activated T cells (NFAT) signaling pathways related to inflammation by downregulating the expression of proinflammatory cytokines and chemokines. Furthermore, camu-camu fruit treatment activated the expression of nuclear factor E2-related factor 2 (Nrf2) and subsequently increased the NAD(P)H:quinone oxidoreductase1 (NQO1) expression to protect keratinocytes against high-glucose-induced oxidative stress. These results indicate that camu-camu fruit is a promising material for preventing oxidative stress and skin inflammation induced by high glucose level.     

Cu2O/CuO Electrocatalyst for Electrochemical Reduction of Carbon Dioxide to Methanol

Herein, we report the controlled and direct fabrication of Cu₂O/CuO thin film on the conductive nickel foam using electrodeposition route for the electrochemical reduction of carbon dioxide (CO₂) to methanol. The electrocatalytic reduction was performed in CO₂ saturated aqueous solution consisting of KHCO₃, pyridine and HCl at room temperature. CO₂ reduction was carried out at a constant potential of −1.3 V for 120 min to study the electrochemical performance of the prepared electrocatalysts. Cu₂O/CuO shows better electrocatalytic activity with highest current density of 46 mA/cm². The prepared catalyst can be an efficient and selective electrode for the production of methanol.