Crystalline-phase-dependent red emission behaviors of Gd2O3:Eu3+ thin-film phosphors

Gd₂O₃:Eu³⁺ luminescent thin films have been grown on Al₂O₃(0001) substrates using pulsed-laser deposition. The films grown at different deposition conditions showed different crystalline phases, surface morphologies and luminescent characteristics. Both cubic and monoclinic crystalline phases were observed for the Gd₂O₃:Eu³⁺ films, and the crystalline structure and the surface morphology of the films were highly dependent on the oxygen pressure and substrate temperature. The cubic system showed a higher luminescence than the monoclinic system. The luminescence characteristics were strongly influenced by not only the crystalline structure but also the surface morphology of the films. The photoluminescencebrightness data obtained from Gd₂O₃:Eu³⁺ films indicate that Al₂O₃(0001) is a promising substrate for growth of high-quality Gd₂O₃:Eu³⁺ thin-film red phosphor. In particular, the Gd₂O₃:Eu³⁺ films showed a much better photoluminescence behavior than a Y₂O₃:Eu³⁺ films with the same thickness. PACS 78.20.-e; 78.55.-m; 78.66.-w     

k-space inherited parallel acquisition (KIPA): application on dynamic magnetic resonance imaging thermometry

In this study, a novel method for dynamic parallel image acquisition and reconstruction is presented. In this method, called k-space inherited parallel acquisition (KIPA), localized reconstruction coefficients are used to achieve higher reduction factors, and lower noise and artifact levels compared to that of generalized autocalibrating partially parallel acquisition (GRAPPA) reconstruction. In KIPA, the full k-space for the first frame and the partial k-space for later frames are required to reconstruct a whole series of images. Reconstruction coefficients calculated for different segments of k-space from the first frame data set are used to estimate missing k-space lines in corresponding k-space segments of other frames. The local determination of KIPA reconstruction coefficients is essential to adjusting them according to the local signal-to-noise ratio characteristics of k-space data. The proposed algorithm is applicable to dynamic imaging with arbitrary k-space sampling trajectories. Simulations of magnetic resonance thermometry using the KIPA method with a reduction factor of 6 and using dynamic imaging studies of human subjects with reduction factors of 4 and 6 have been performed to prove the feasibility of our method and to show apparent improvement in image quality in comparison with GRAPPA for dynamic imaging.     

Two-dimensional poroelastic acoustical foam shape design for absorption coefficient maximization by topology optimization method

Optimal shape design of a two-dimensional poroelastic acoustical foam is formulated as a topology optimization problem. For a poroelastic acoustical system consisting of an air region and a poroelastic foam region, two different physical regions are continuously changed in an iterative design process. To automatically account for the moving interfaces between two regions, we propose a new unified model to analyze the whole poroelastic acoustical foam system with one set of governing equations; Biot's equations are modified with a material property interpolation from a topology optimization method. With the unified analysis model, we carry out two-dimensional optimal shape design of a poroelastic acoustical foam by a gradient-based topology optimization setting. The specific objective is the maximization of the absorption coefficient in low and middle ranges of frequencies with different amounts of a poroelastic material. The performances of the obtained shapes are compared with those of well-known wedge shapes, and the improvement of absorption is physically interpreted.     

Synthesis and evaluation of triphenylphosphonium conjugated 18F-labeled silica nanoparticles for PET imaging

Journal of Radioanalytical and Nuclear Chemistry - Accumulation of triphenylphosphonium (TPP) is normally observed in the mitochondria from the extracellular spaces due to the high difference in...     

Applicability of in situ detectors for radiological assessment of strontium-90 in rivers and lakes

Journal of Radioanalytical and Nuclear Chemistry - An in situ detector for radiological assessments of strontium-90 (90Sr) in river and lake water is developed, based on a CaF2(Eu) scintillator,...     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715     

Mechanical and electrical response variation of the polyurethane–tin oxide–carbon nanotube composite microfiber depending on the chemical solution

Toward the goal of smart sensor systems for wearable electronics, polymer microfiber‐based free‐standing sensors benefit from excellent flexibility, decent ductility, and easy wearability in comparison with thin‐film‐based sensing devices. Herein, we report a hydrophobic and conducting single‐strand microfiber‐based liquid‐phase chemical sensor consisting of polyurethane (PU), tin oxide (SnO₂), and carbon nanotube (CNT) composites with applying a (1H,1H,2H,2H‐heptadecafluorodec‐1‐yl) phosphonic acid (HDF‐PA)‐based self‐assembled monolayer. The free‐standing HDF‐PA‐treated PU–SnO₂–CNT composite microfiber showing selective filtering properties with the repellency of water and the penetration of an organic solvent is electrically and mechanically characterized. Finally, the single‐strand HDF‐PA‐treated PU–SnO₂–CNT composite microfiber‐based chemical sensor, which shows excellent mechanical properties and aqueous stability, is demonstrated to detect the presence of a chemical in pure water or counterfeit gasoline in pure gasoline by observing mechanical changes, especially variations in the length and diameter of the fiber, and monitoring the electrical resistance change. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 495–502     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Cover Feature: How Many O-Donor Groups in Enterobactin Does It Take to Bind a Metal Cation? (Chem. Eur. J. 28/2019)

The E. coli siderophore enterobactin, the strongest Fe^III chelator known to date, forms hexacoordinate complexes with Si^IV, Ge^IV, and Ti^IV. Synthetic protocols have been developed to prepare non-symmetric enterobactin analogues with varying denticities. Various benzoic acid residues were coupled to the macrocyclic lactone to afford a diverse library of ligands. These enterobactin analogues were bound to Si^IV, Ge^IV, and Ti^IV, and the complexes were investigated through experimental and computational techniques. The binding behavior of the synthesized chelators enabled assessment of the contribution of each of the phenolic hydroxy groups in enterobactin to metal-ion complexation. It was found that at least four O-donors are needed for enterobactin derivatives to act as metal binders. Density functional theory calculations indicate that the strong binding behavior of enterobactin can be ascribed to a diminished translational entropy penalty, a common feature of the chelate effect, coupled with the structural arrangement of the three catechol moieties, which allows the triseryl base to be installed without distorting the preferred local metal-binding geometry of the catecholate ligands.     

Alkoxide-Promoted Selective Hydroboration of N-Heteroarenes: Pivotal Roles of in situ Generated BH3 in the Dearomatization Process

While numerous organo(metallic)catalyst systems were documented for dearomative hydroboration of N-aromatics, alkoxide base catalysts have not been disclosed thus far. Described herein is the first example of alkoxide-catalyzed hydroboration of N-heteroaromatics including pyridines, providing a broad range of reduced N-heterocycles with high efficiency and selectivity. Mechanistic studies revealed an unprecedented counterintuitive dearomatization pathway, in which 1) pyridine-BH₃ adducts undergo a hydride attack by alkoxyborohydrides, 2) in situ generated BH₃ serves as a catalytic promoter, and 3) 1,4-dihydropyridyl borohydride is in a predominant resting state.