Preparation and characterization of acrylic‐based black particles of poly(methyl methacrylate‐co‐ethylene glycol dimethacrylate) by dispersion polymerization for electrophoretic displays

Ultrafine black particles, ranging in diameter from 1 to 3 μm, were prepared by dispersion polymerization in a methanol/water mixture with vinyl monomers, nonpolymerizable Sudan black B dyes, and fluorescein isothiocyanate labeled charge control additives. Both the ratio of the methanol to the water dispersion medium and the polymeric stabilizer concentration had significant effects on the particle size. The important role of the stabilizer concentration lay in the particle formation step, during which it determined the particle stability and final particle size. These could affect the extent of the aggregation of nuclei by changing the adsorption rate of the stabilizer and the viscosity of the dispersion medium, resulting in smaller particles. The fluorescent‐labeled charge control additives strongly affected the electrophoretic mobility. A small concentration of fluorescent‐labeled charge control additives increased the electrophoretic mobility. However, a further addition reduced the electrophoretic mobility of the polymer particles. The concentration dependence of the fluorescent‐labeled charge control additives on the deposition behavior in the polymer particles was successfully imaged and thereafter quantified by image analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5608–5616, 2004     

Effects of poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] on the charge distributions of low‐density polyethylene/polystyrene blends

The effect of the triblock copolymer poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS) on the formation of the space charge of immiscible low‐density polyethylene (LDPE)/polystyrene (PS) blends was investigated. Blends of 70/30 (wt %) LDPE/PS were prepared through melt blending in an internal mixer at a blend temperature of 220 °C. The amount of charge that accumulated in the 70% LDPE/30% PS blends decreased when the SEBS content increased up to 10 wt %. For compatibilized and uncompatibilized blends, no significant change in the degree of crystallinity of LDPE in the blends was observed, and so the effect of crystallization on the space charge distribution could be excluded. Morphological observations showed that the addition of SEBS resulted in a domain size reduction of the dispersed PS phase and better interfacial adhesion between the LDPE and PS phases. The location of SEBS at a domain interface enabled charges to migrate from one phase to the other via the domain interface and, therefore, resulted in a significant decrease in the amount of space charge for the LDPE/PS blends with SEBS. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2813–2820, 2004     

Photoswitching of holographic polymer-dispersed liquid crystals doped with chiral dopant

Chiral dopants were added to the formulation of holographic polymer-dispersed liquid crystals and the effects studied in terms of grating formation dynamics, morphology, diffraction efficiency, contrast ratio and electro-optical properties of the films. A gradual increase of real-time diffraction efficiency, decrease of droplet size and increase of diffraction efficiency of the composite film were obtained with the addition and increasing content of chiral dopant, due to the increased viscosity of the liquid crystal (LC) doped with the chiral dopant leading to decreased droplet coalescence. The contrast ratio decreased with increasing content of chiral dopant due to the difficult orientation of LC molecules caused by the formation of a helical structure. Addition of a small amount of the chiral dopant increased the driving voltage slightly, whereas the decay time is decreased significantly as a result of the high twisting of the helical structure.     

Dual effects of fullerene doped to holographic polymer dispersed liquid crystals

Doping of conductive fullerene particles to the formulation of conventional holographic polymer dispersed liquid crystal‐induced dual effects of reducing both droplet coalescence and operating voltage. Fullerene induced an induction period which otherwise does not exist, followed by a gradual increase of diffraction efficiency to a saturation value being increased with increasing fullerene content. The increased diffraction efficiency was caused by the decreased droplet coalescence which was due to the hindered migration of LC by the fullerene particles. On the other hand, doped fullerene particles augmented the conductivity of polymer phase and hence the local electrical field imposed on LC droplet, which overcome the threshold for driving and reduced operating voltage and response times. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5590–5596, 2007     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Characterization and epitope mapping of two monoclonal antibodies against human CD99

CD99 plays a critical role in the diapedesis of monocytes, T cell differentiation, and the transport of MHC molecules. Engagement of CD99 by agonistic monoclonal antibodies has been reported to trigger multifactorial events including T cell activation as well as cell-cell adhesion during hematopoietic cell differentiation. In this study, to identify the functional domains participating in the cellular events, we mapped the epitopes of CD99, which are recognized by two agonistic CD99 monoclonal antibodies, DN16 and YG32. Using recombinant fusion proteins of GST with whole or parts of CD99, we found that both antibodies interact with CD99 molecules independently of sugar moieties. DN16 mAb detected a linear epitope located in the amino terminal region of CD99 while YG32 mAb bound another linear epitope in the center of the extracellular domain. To confirm that the identified epitopes of CD99 are actually recognized by the two mAbs, we showed the presence of physical interaction between the mAbs and the fusion proteins or synthetic peptides containing the corresponding epitopes using surface plasmon resonance analyses. The dissociation constants of DN16 and YG32 mAbs for the antigen were calculated as 1.27 x 10(-7) and 7.08 x 10(-9) M, respectively. These studies will help understand the functional domains and the subsequent signaling mechanism of CD99.     

Enantioselective oxidation of sulfides with hydrogen peroxide catalyzed by vanadium complex of sterically hindered chiral Schiff bases

Sterically hindered chiral Schiff base ligands 4a-d were prepared from an aldehyde derived from BINOL. The vanadium complexes of the ligands catalyze an efficient, enantioselective H₂O₂-promoted sulfoxidation of alkyl aryl sulfides, and enantioselectivities as high as 98-99% ee are observed in the sulfoxidation of benzyl aryl sulfides.     

Generalized fundamental equations on the submanifolds of a manifoldESX n

A connection which is both Einstein and semisymmetric is called anES connection, and a generalizedn-dimensional Riemannian manifold on which the differential geometric structure is imposed by a unified field tensorg through anES connection is called ann-dimensionalES manifold and denoted byESX _n . We investigate some necessary and sufficient conditions for submanifolds ofESX _n to be also Einstein and derive the generalized fundamental equations on various submanifolds ofESX _n , such as generalized Gauss formulas, generalized Weingarten equations, and generalized Gauss-Codazzi equations. We employ the useful and powerful concept ofC-nonholonomic frame of reference, introduced in earlier work.     

Dynamic synovial fibroblasts are modulated by NBCn1 as a potential target in rheumatoid arthritis

Rheumatoid arthritis (RA) is an autoimmune disease characterized by aggressive fibroblast-like synoviocytes (FLSs) and pannus formation. Various therapeutic strategies have been developed against inflammatory cytokines in RA in recent decades. Based on the migratory features of FLSs, we examined whether modulation of the migratory module attenuates RA severity. In this study, inflamed synovial fluid-stimulated FLSs exhibited enhanced migration and migratory apparatus expression, and sodium bicarbonate cotransporter n1 (NBCn1) was identified in primary cultured RA-FLSs for the first time. The NBC inhibitor S0859 attenuated the migration of FLSs induced with synovial fluid from patients with RA or with TNF-α stimulation. Inhibition of NBCs with S0859 in a collagen-induced arthritis (CIA) mouse model reduced joint swelling and destruction without blood, hepatic, or renal toxicity. Primary FLSs isolated from the CIA-induced mouse model also showed reduced migration in the presence of S0859. Our results suggest that inflammatory mediators in synovial fluid, including TNF-α, recruit NBCn1 to the plasma membrane of FLSs to provide dynamic properties and that modulation of NBCn1 could be developed into a therapeutic strategy for RA.Subject terms: Chemotaxis, Bone, Ion channel signalling, Rheumatoid arthritis, Drug development     

The consensus string problem for a metric is NP-complete

Given a set S of strings, a consensus string of S based on consensus error is a string w that minimizes the sum of the distances between w and all the strings in S. In this paper, we show that the problem of finding a consensus string based on consensus error is NP-complete when the penalty matrix is a metric.